1. Product Overview
The LEKATO Guitar Effect Pedal Looper is a versatile audio processor designed to enhance your musical performance with loop recording, overdubbing, and a built-in tuner. Its compact size and robust construction make it ideal for practice and performance.

Figure 1: Front view of the LEKATO Looper Pedal

Figure 2: Angled view of the LEKATO Looper Pedal
2. Setup
2.1 Power Supply
The LEKATO Looper Pedal requires a DC 9V AC adapter with a center-minus plug. The power adapter is NOT included with the pedal.
- Voltage: DC 9V
- Polarity: Center Negative (positive pole outside, negative pole inside)
- Connector Size: 5.5mm x 2.1mm

Figure 3: Correct power adapter polarity (DC 9V, Center Negative)

Figure 4: Power adapter connector dimensions (5.5mm x 2.1mm)
CAUTION: Using an adapter with incorrect voltage or polarity will damage the pedal and void the warranty.
2.2 Connections
Connect your instrument and amplifier to the pedal using standard 1/4'' mono audio cables.
- Input: Connect your guitar or other instrument to the 1/4'' mono audio input jack.
- Output: Connect the 1/4'' mono audio output jack to your amplifier or other effects pedals.
2.3 Computer Connection
The pedal can be connected to a computer via a USB cable for importing and exporting loop files.

Figure 5: Connecting the looper pedal to a computer via USB
3. Operating Instructions
3.1 Controls Overview

Figure 6: Control layout and functions
- LEVEL Knob: Controls the playback volume of the recorded loop.
- TUNER Buttons (Left/Right Arrows): Used to switch between stored loops (1-9) and activate the tuner function.
- FOOTSWITCH: A multi-function switch for controlling recording, playback, overdub, undo, redo, stop, and delete operations.
- LED Display: Provides visual feedback for recording/playback progress, current loop number, and tuning status.
3.2 Basic Looper Functions
The footswitch is central to controlling the looper's functions:
- Record: Tap the footswitch once to start recording. The LED display will show recording progress.
- Playback: After recording, tap the footswitch once to start playback of the loop.
- Overdub: While a loop is playing, tap the footswitch once again to enter overdub mode. You can now record another layer over the existing loop.
- Overdub Recording Playback: After overdubbing, tap the footswitch once again to play back the loop with the new overdubbed layer.
- Undo/Redo: During recording or playback, press and hold the footswitch to undo the last recorded layer. Press and hold again to redo it.
- Stop: Double-tap the footswitch to stop playback or recording.
- Delete: When the looper is stopped, press and hold the footswitch to delete the current loop.
3.3 Tuner Function
The pedal includes a high-sensitivity built-in tuner:
- To enter tuning mode, press both TUNER buttons (left and right arrows) simultaneously.
- The LED display will show the note being played and indicate if it's flat, sharp, or in tune.
- Press any button or the footswitch to exit tuning mode.
3.4 Loop Management
The pedal can store up to 9 individual loops:
- Use the TUNER buttons (left/right arrows) to navigate and select different loop slots (1-9).
- Each single loop recording can be as long as 10 minutes.
- The total recording time across all 9 loops is 40 minutes.
3.5 Computer Import/Export
You can manage your loops by connecting the pedal to a computer:
- Connect the pedal to your Windows or Mac OS computer using a USB cable.
- The pedal will appear as a removable drive.
- You can import and export WAV lossless audio files to and from the pedal.
3.6 Product Demonstration
Video 1: Official product demonstration showcasing looping and tuning features.
4. Maintenance
- Cleaning: Clean the pedal only with a dry, soft cloth. Do not use alcohol or other cleaning fluids, as they may damage the finish or internal components.
- Storage: When not in use, turn off the pedal. Store it in a dry place away from direct sunlight, heat sources, dampness, or dusty areas.
- Handling: Avoid violent vibrations, shock, or dropping the product, as this may cause malfunction.
5. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Power indicator flickering | Low battery (if using a battery power supply, though pedal uses DC adapter) | Ensure your power supply is stable and providing sufficient current. If using a power bank, ensure it's charged. |
| Pedal not working properly | Incorrect power adapter polarity | Ensure your DC 9V adapter is center-negative (positive outside, negative inside). |
| Poor signal quality or transmission distance | Obstructions between guitar and effector (if using wireless system) | Ensure clear line of sight if using wireless components. Check cable connections for damage. |
| No sound output | Incorrect connections, volume too low, or pedal bypassed | Check all cable connections. Increase the LEVEL knob. Ensure the pedal is engaged (not in true bypass mode if applicable). |
6. Specifications
| Feature | Detail |
|---|---|
| Material | Zinc Alloy |
| Power Supply | DC 9V AC adapter (center minus plug, not included) |
| Input | 1/4'' mono audio jack |
| Output | 1/4'' mono audio jack |
| Item Size | 90 x 40 x 49.5mm / 3.54 x 1.57 x 1.95in |
| Item Weight | 199g |
| Sampling Rate | 48KHz / 24bit |
| Recording Time | 40 minutes total, 9 loops (up to 10 minutes per loop) |
| Bypass Mode | True Bypass |
| Computer Compatibility | Windows System, Mac OS (WAV lossless audio) |
7. User Tips
- Practice Tool: Utilize the looper to record rhythm sections and practice soloing over them. This is a great way to improve timing and improvisation.
- Layering: Experiment with overdubbing multiple instrument parts or vocal harmonies to create rich, multi-layered soundscapes.
- Tuning On-the-Fly: The built-in tuner is convenient for quick tuning adjustments between songs or during practice sessions.
- Backup Loops: Regularly connect your pedal to a computer to back up your favorite loops, especially before creating new ones.
8. Safety and Support
8.1 General Safety Warnings
- Read all instructions before use to ensure safety and prevent damage.
- Do not disassemble or repair this product by yourself. Refer all servicing to qualified service personnel.
- Do not use or store the product near heat sources, damp, or dusty areas.
- Keep the device and its cord out of reach of children under 3 years old.
- Do not use alcohol or other cleaning fluids to clean this product.
- Always ensure the correct power supply (DC 9V, center negative) is used.
8.2 EC Declaration of Conformity
This product conforms with all applicable European Union regulations. The CE marking confirms that the product meets the essential requirements for health, safety, environmental protection, and consumer protection as laid down in EU directives. By affixing the CE marking, the manufacturer declares that the product is in compliance with all legal requirements for CE marking and may be placed on the market throughout the European Economic Area.