KimTin X88 PRO 10 IR Wireless Remote Control User Manual

1. Introduction

This manual provides comprehensive instructions for the KimTin IR Wireless Remote Control, specifically designed for seamless operation with X88 PRO 10 Android 10.0 and Android 11.0 TV Boxes. This remote offers standard TV box controls and features an IR learning function for enhanced compatibility with other infrared devices.

2. Package Contents

Please check the package for the following items:

• 1 x IR Remote Controller

Note: The TV Box and AAA batteries are not included and must be purchased separately.

3. Specifications

4. Setup Instructions

4.1. Battery Installation

1. Open the battery compartment cover located on the back of the remote control.
2. Insert two (2) AAA batteries, ensuring that the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
3. Close the battery compartment cover securely.

4.2. Compatibility Check

This remote control is specifically designed for X88 PRO 10 Android 10.0 and Android 11.0 TV Boxes. Ensure your TV box model matches for optimal performance. The remote may not function correctly with other TV box models.

4.3. IR Learning Function

The remote supports IR learning, allowing it to mimic functions from other infrared remote controls (e.g., your TV's power or volume buttons). This feature helps consolidate control of multiple devices.

1. Place the KimTin remote control and the source remote control (e.g., your TV remote) on a flat surface, facing each other, with their IR emitters aligned and approximately 2-5 cm apart.
2. On the KimTin remote, press and hold the 'SET' button until the indicator light begins to blink slowly. This indicates the remote is in learning mode.
3. Press the button on the KimTin remote that you wish to program (e.g., the 'TVM' button for TV input, or 'VOL+' for TV volume up). The indicator light will now blink rapidly, awaiting a signal.
4. On the source remote, press the corresponding button (e.g., the 'Input' button on your TV remote, or 'Volume Up'). The indicator light on the KimTin remote will blink three times quickly and then remain solid, indicating successful learning.
5. Repeat steps 3 and 4 for any other buttons you wish to program.
6. Once all desired buttons are programmed, press the 'SET' button again to exit IR learning mode. The indicator light will turn off.

5. Operating the Remote Control

The KimTin remote control provides intuitive access to your X88 PRO 10 Android TV Box functions. Below is a general guide to the buttons:

• Power Button: Turns the connected X88 PRO 10 TV Box on or off.
• SET Button: Used to enter and exit IR learning mode.
• TVM, VOL-, VOL+: These buttons are typically for controlling TV functions (e.g., TV/Video Mode, Volume Down, Volume Up) and can be programmed via the IR learning function.
• Navigation Pad (Up, Down, Left, Right, OK): Used to navigate through menus, select items, and confirm actions on the TV Box interface.
• Back/Return Button: Returns to the previous screen or menu.
• Home Button: Returns to the main home screen of the TV Box.
• APPS Button: Provides quick access to the applications menu on your TV Box.
• Help Button: Accesses help or information features (if supported by the TV Box software).
• Mute Button: Mutes or unmutes the audio output.
• Number Pad (0-9): For direct input of numbers, such as channel selection or password entry.
• Media Control Buttons (e.g., Play/Pause, Fast Forward, Rewind): Control media playback within compatible applications.

6. Maintenance

• Keep Dry: Avoid exposing the remote control to liquids, moisture, or high humidity, as this can damage internal components.
• Cleaning: Clean the remote with a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical agents.
• Avoid Impact: Protect the remote from dropping or strong impacts.
• Battery Care: If the remote will not be used for an extended period, remove the batteries to prevent potential leakage and damage.
• Temperature: Store the remote in a cool, dry place, away from direct sunlight or extreme temperatures.

7. Troubleshooting

7.1. Remote Not Responding

• Check Batteries: Ensure that the AAA batteries are inserted correctly with the proper polarity and are not depleted. Replace with fresh batteries if necessary.
• Line of Sight: Verify that there is a clear, unobstructed line of sight between the remote control's IR emitter and the IR receiver on your X88 PRO 10 TV Box.
• Compatibility: Confirm that your TV Box is an X88 PRO 10 model running Android 10.0 or 11.0. This remote is designed specifically for these models.

7.2. IR Learning Not Working

• Alignment and Distance: Ensure both the KimTin remote and the source remote are aligned head-to-head and are 2-5 cm apart during the learning process.
• Source Remote Battery: Make sure the source remote has sufficient battery power to emit a strong IR signal.
• Repeat Steps: Carefully repeat the IR learning steps as described in Section 4.3. Timing and precise button presses are crucial.

8. User Tips

• For optimal performance and responsiveness, always use fresh, high-quality AAA batteries.
• Take advantage of the IR learning function to program essential TV controls (like power, input, and volume) onto this single remote, reducing clutter.
• Keep the remote in a safe place to prevent misplacement and avoid accidental damage.

9. Warranty and Support

9.1. Warranty Information

This KimTin remote control is covered by a 12-month warranty from the date of purchase, covering manufacturing defects under normal use.

9.2. Customer Support

For any questions, technical assistance, or warranty claims, please contact the seller directly through your purchase platform. When contacting support, please provide your order number and a detailed description of the issue to facilitate a quicker resolution.