QCY T13

Contents

QCY T13 Wireless Headphones User Manual

Model: T13 | Brand: QCY

1. Introduction

The QCY T13 Wireless Headphones are designed to provide a superior audio experience with advanced features for clear calls, extended playtime, and comfortable use. This manual will guide you through the setup, operation, and maintenance of your new earbuds.

QCY T13 Product Overview Video

2. Package Contents

Please check the box for the following items:

  • QCY T13 Earbuds (1 pair)
  • Charging Case (1)
  • Eartips (3 pairs: S/M/L, one pair pre-assembled)
  • Type-C Charging Cable (1)
  • User Manual (1)
  • Multi-Function Cleaning Pen (1, if included with your purchase)
Black QCY T13 earbuds in their charging case

QCY T13 Earbuds and Charging Case

QCY Multi-Function Cleaning Pen with various tips

QCY Multi-Function Cleaning Pen

3. Setup

3.1 Initial Charging

Before first-time use, ensure the earbuds and charging case are fully charged. Remove any protective stickers from the earbud charging contacts.

  • Charging Earbuds: Place earbuds into the charging case. The earbud LED will turn solid red while charging and turn blue for 1 minute once fully charged before turning off.
  • Charging Case: Connect the Type-C cable to the charging port on the case and a USB power source. The case LED will turn solid red while charging and solid green once fully charged.
USB-C Quick Charge graphic showing 5 minutes of charging equals 60 minutes of playback

USB-C Quick Charge Feature

3.2 Choosing Eartips

Select the eartips that provide the most comfortable and secure fit for optimal sound quality and noise isolation. The middle-sized eartips fit most users.

Diagram showing small, medium, and large silicone eartips for comfortable fit

Eartip Sizes (L, M, S)

3.3 Pairing with Your Device

For the best experience, download the QCY app from your device's app store before starting.

  1. Power On: Open the charging case lid and pick up the earbuds. They will automatically power on.
  2. Initial Pairing: On your phone, enable Bluetooth and search for "QCY-T13". Tap to connect.
  3. Auto-Reconnect: Once paired, the earbuds will automatically reconnect to the last connected device when powered on.
Phone screen showing QCY-T13 connected in Bluetooth settings

Easy One-Step Pairing

3.4 One-Press to Turn Connectable (Re-pairing)

If earbuds are already connected to a phone and you wish to connect to a new device:

  1. Place both earbuds into the charging case.
  2. Open the case lid and keep pressing the button on the case for 3 seconds until the LED blinks green 3 times.
  3. Pick up the earbuds again. They are now in pairing mode and connectable to a new device.

3.5 Factory Reset

If you encounter connection issues or only one earbud has sound:

  1. Push both earbuds into the charging case.
  2. Keep pressing the button on the case for 10 seconds or until the LED blinks red and blue 3 times.
  3. The earbuds will reset and power on. You can then attempt to re-pair them.

4. Operation

4.1 Touch Controls

The QCY T13 earbuds feature sensitive touch controls for various functions:

ActionFunction
Long press touch panel for 1.5sPower On
Place earbuds in charging casePower Off
Double tap touch panelAnswer/End Call, Play/Pause Music
Long press touch panel for 1.5sReject Call
Long press left touch panel for 1.5sSkip Track Backward
Long press right touch panel for 1.5sSkip Track Forward
Triple tap left touch panelActivate Voice Assistant
Triple tap right touch panelActivate Low-Latency Mode
Diagram illustrating touch controls for left and right earbuds

Sensitive Touch Control Diagram

4.2 QCY App Customization

The QCY app (available for Android 6.0+ / iOS 11+) allows for further customization and control:

  • Button Customization: Personalize touch control functions.
  • EQ Modes: Choose from default or customized equalizer settings.
  • Sleep Mode: Disable touch functions to prevent accidental activation. To exit Sleep Mode, place earbuds back into the charging case or disable it via the QCY App.
  • OTA Firmware Update: Keep your earbuds updated with the latest features and improvements.
QCY App interface showing customization options like Sleep Mode, Button Customization, EQ, and OTA Update

QCY App Customization Options

4.3 Call Functions (4-Mic ENC)

The QCY T13 features a 4-microphone Environmental Noise Cancellation (ENC) system for clearer calls. This technology effectively blocks out 90% of background noise, ensuring your voice is transmitted clearly.

Woman using QCY T13 earbud with 4-Mic ENC system graphic

4-Mic ENC System for Clearer Calls

Diagram of earbud showing Noise Pick-up Mic and Call Mic locations

Earbud Microphone Placement

5. Maintenance

5.1 Cleaning

Regular cleaning helps maintain the performance and longevity of your earbuds. Use the provided multi-function cleaning pen or a soft, dry cloth.

  • Gently clean the eartips, speaker mesh, and charging contacts to remove earwax, dust, and debris.
  • Wipe the earbuds and charging case with a soft, dry cloth. Do not use harsh chemicals, oils, or volatile liquids.

5.2 Storage and Care

  • Store the earbuds in their charging case when not in use to protect them and keep them charged.
  • Avoid storing the earbuds in extreme temperatures (below 0°C or above 45°C).
  • Do not disassemble or modify the earbuds for any reason, as this may cause damage and void the warranty.
  • Avoid using the indicator light close to the eyes of children or animals.
  • Do not use the earbuds during a thunderstorm to avoid dysfunction and increasing the risk of electric shock.
  • If the earbuds are left unused for over two weeks, please recharge them to maintain battery health.

6. Specifications

FeatureDetail
Product NameT13
Pairing NameQCY-T13
Bluetooth Version5.1
Available SystemiOS / Android
Operation Range10m
Battery Life (Earbuds)Up to 8 hours (listening), 5 hours (calling) on a single charge
Total Playtime (with Case)Up to 40 hours
Bluetooth ProfilesHFP/HSP/A2DP/AVRCP
Charging Case Battery Capacity380mAh
Earbud Top-ups by Case2-3 full charges
Charging PortType-C
Driver Diameter7.2mm Dynamic Driver
Microphones4 (with ENC noise cancellation)
Waterproof RatingIPX5 (Sweat and water resistant)
MaterialABS, Plastic
CertificationsCE, FCC, RoHS, BQB
Diagram showing the internal components of a 7.2mm dynamic driver for HIFI sound

7.2mm Dynamic Driver for HIFI Sound

Abstract graphic representing a Bluetooth 5.1 chip

Cutting Edge Bluetooth 5.1 Chip

7. Troubleshooting

7.1 Common Issues & Solutions

  • Only one earbud has sound: Place both earbuds back into the charging case and close the cover. Then, take them out again. If the issue persists, perform a factory reset (see Section 3.5).
  • Phone cannot connect to earbuds: Delete the "QCY-T13" pairing record from your phone's Bluetooth settings. Then, re-enter pairing mode (see Section 3.4) and attempt to connect again. If your phone has a program error, try turning its Bluetooth function off and on, or rebooting the phone.
  • No sound during music playback or calls: For Android phones, check the Bluetooth settings for "QCY-T13". Ensure "Phone audio" and "Media audio" are enabled. If not, toggle them off and on. If still no sound, re-pair the earbuds with your phone.
  • Video/game audio delay: Audio delay can be influenced by the usage environment, network conditions, and your phone's audio codec. While the Bluetooth 5.1 chip aims for low latency, some minor delays might occur.
  • Stuttering or intermittent sound: This can be caused by interference from strong signals (Wi-Fi, 5G/4G) or high-power electrical appliances in the vicinity. Try changing your environment or re-pairing the earbuds.
  • Earbuds not charging in the case: Ensure the charging case has sufficient power (check LED indicator). Verify that any protective stickers on the earbud charging contacts have been removed. Clean the charging contacts on both the earbuds and the case.
  • Case lid feels loose or creaks: While some minor play might be present, if the lid feels excessively loose or creaks significantly, it might indicate a manufacturing variance.

8. User Tips

  • App Usage: Download the QCY app for advanced features like button customization, EQ settings, and firmware updates. The app requires Android 6.0 or above, or iOS 11 or above.
  • Sleep Mode: Utilize the 'Sleep Mode' in the QCY app to disable touch controls and prevent accidental touches, especially when lying down or during sleep. Remember to exit Sleep Mode via the app or by placing the earbuds back in the charging case.
  • Microphone Performance: The 4-mic ENC system is designed for clear calls. If experiencing issues, ensure earbuds are properly seated and try in a quieter environment. The microphone works individually for each earbud.
  • Battery Preservation: It is safe to store the earbuds in the charging case even when they are 100% charged; this will not harm the battery.
  • Connectivity: The earbuds can be used individually (mono mode). They are compatible with both iOS and Windows devices.
  • Water Resistance: The earbuds are IPX5 rated, meaning they are sweat and water resistant. They are suitable for workouts and light rain, but not for showering or swimming.

9. Warranty & Support

9.1 Warranty Period

The warranty period for this product is 12 months from the date of purchase. Please retain your purchase receipt as proof of purchase.

9.2 Free Service

In case of any defects caused by quality issues within the warranty period, please contact your distributor with your warranty card and purchase receipts for free exchange or repair service.

9.3 Non-Warranty Conditions

Free service will not be provided under the following circumstances:

  • Damages caused by unauthorized disassembly or modification.
  • Defects or physical damages caused by liquid exposure, dropping, or other improper use.
  • Damages caused by natural disasters (e.g., earthquakes, lightning).
  • Damage resulting from use in abnormal voltage or environmental conditions.

9.4 Contact Information

For after-sales service and support, please contact:

  • Phone: 4008-306-708
  • Website: www.qcy.com
  • Manufacturer: Dongguan Hele Electronics Co., Ltd.
  • Address: No. 325 Yuehui Rd. Daojiao Town, Dongguan City, Guangdong Province, China

A detailed user manual in PDF format is available for download. Please refer to the product page or manufacturer's website for the link: QCY T13 User Manual (PDF)

© 2023 QCY. All rights reserved.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.