1. Introduction
This manual provides detailed instructions for the operation and maintenance of your FlySky FS-GT5 2.4G 6-channel RC Transmitter and FS-BS6 Receiver. Designed for RC cars, crawlers, and boats, this digital proportional radio control system offers reliable performance and advanced features. Please read this manual thoroughly before use to ensure proper setup and safe operation.

2. Package Contents
Verify that all items listed below are included in your package:
- 1 x FS-GT5 Transmitter
- 1 x FS-BS6 Receiver
- 1 x Handle sheath
- 1 x English manual (this document)
- 1 x Alignment line

3. Specifications
| Feature | Specification |
|---|---|
| Product Model | FS-GT5 |
| Channels | 6 |
| Compatible Models | Car, Boat |
| Wireless Frequency | 2.4GHz |
| Transmission Power | <20 dBm |
| Wireless Protocol | AFHDS 2A |
| Range | 100 ~ 300m (ground) |
| Channel Resolution | 4096 |
| Battery (Transmitter) | 4 x 1.5V AA batteries |
| Charging Port | None |
| Low Voltage Alarm | AA battery <4.4V, 2S lithium battery <7.4V |
| Antenna Type | External single antenna |
| Display | NTN semi-transparent, segment code screen, VA52.5 * 34mm |
| Temperature Range | -10 ℃ — + 60 ℃ |
| Humidity Range | 20% - 95% |
| Online Update | No |
| Color | Black |
| Dimensions | 158 x 95 x 243mm |
| Weight | 296g |
| Certification | CE, RCM, FCC ID: N4ZGT500 |
| Material | Composite Material |
| Recommended Age | 6-12Y, 14+y |
4. Product Overview
4.1 FS-GT5 Transmitter Layout

The FS-GT5 transmitter features a comprehensive layout for precise control. Key components include:
- Steering Wheel (Channel 1): Controls left and right steering.
- Throttle/Brake (Channel 2): Controls forward, reverse, and braking.
- Channel 3 Button: Assignable button for auxiliary functions.
- Channel 4 (3 Position Switch): Assignable 3-position switch.
- Channel 5 & 6 Knobs: Rotary knobs for auxiliary functions.
- Steering Trim (Channel 1): Adjusts the neutral position of the steering.
- Throttle Trim (Channel 2): Adjusts the neutral position of the throttle.
- Steering D/R (Dual Rate): Adjusts the maximum steering angle.
- LCD Display: Shows current settings and telemetry data.
- NaviKey (Rotate to "Select", press to "Confirm"): For menu navigation and selection.
- BIND Button: Used for pairing the transmitter with the receiver.
- BACK/Exit Button: Returns to the previous menu or exits current function.
- LED Indicator: Status indicator.
- Antenna: Transmits the radio signal.
- Battery Compartment: Holds 4x AA batteries.
4.2 FS-BS6 Receiver Layout

The FS-BS6 receiver is a 6-channel unit designed to work seamlessly with the FS-GT5 transmitter. It features:
- CH1-CH6 Ports: Connect your servos and ESC to these channels.
- BIND/VCC Port: Used for binding the receiver to the transmitter and for power input.
- LED Indicator: Shows the receiver's status (e.g., bound, signal lost).
- Antenna: Receives the radio signal from the transmitter.
5. Setup
5.1 Battery Installation (Transmitter)
- Open the battery compartment cover on the bottom of the FS-GT5 transmitter.
- Insert four (4) 1.5V AA batteries, ensuring correct polarity (+/-).
- Close the battery compartment cover securely.
- The transmitter will display a low voltage alarm if the battery voltage drops below 4.4V (for AA batteries) or 7.4V (for 2S lithium batteries, if used with an adapter, not included).
5.2 Receiver Connection
Connect your vehicle's Electronic Speed Controller (ESC) and servos to the corresponding channels on the FS-BS6 receiver. Typically:
- CH1: Steering Servo
- CH2: ESC (Throttle)
- CH3-CH6: Auxiliary functions (e.g., lights, winches, gear shifting)
Ensure all connections are firm and correctly oriented.
5.3 Binding the Transmitter and Receiver
Binding is the process of linking the transmitter to the receiver, allowing them to communicate exclusively. Follow these steps:
- Ensure the transmitter is powered off.
- Insert the bind plug (alignment line) into the BIND/VCC port on the FS-BS6 receiver.
- Connect power to the receiver (e.g., via the ESC). The receiver's LED should flash rapidly, indicating it's in bind mode.
- While holding down the BIND button on the FS-GT5 transmitter, power on the transmitter.
- The transmitter's LCD display should show a binding progress or confirmation message. The receiver's LED should stop flashing and remain solid, indicating successful binding.
- Release the BIND button on the transmitter.
- Power off both the receiver and the transmitter.
- Remove the bind plug from the receiver.
- Power on the transmitter first, then the receiver. The receiver's LED should be solid, confirming a successful connection.
If binding fails, repeat the steps. Ensure no other 2.4GHz devices are interfering during the binding process.
6. Operating Instructions
6.1 Basic Controls
- Steering: Rotate the steering wheel left or right to control the vehicle's direction.
- Throttle: Pull the throttle trigger back for forward movement, push forward for braking/reverse.
- Trims: Use the Steering Trim and Throttle Trim dials to fine-tune the neutral positions if the vehicle drifts or moves slightly when controls are centered.
- Dual Rate (D/R): Adjusts the sensitivity of the steering. Lower D/R for less sensitive steering, higher for more responsive steering.
6.2 Menu Navigation

The FS-GT5 features an LCD display and NaviKey for accessing and adjusting various settings. Rotate the NaviKey to scroll through options and press to confirm. Use the BACK/Exit button to return to the previous screen.
Common menu options include:
- MODEL: Select or manage vehicle models.
- NAME: Rename the current model.
- REV (Reverse): Reverse the direction of a channel.
- EPA (End Point Adjustment): Adjust the maximum travel for each channel.
- SUB-TR (Sub-Trim): Fine-tune the center point of a channel.
- D/R (Dual Rate): Adjust steering and throttle sensitivity.
- EXP (Exponential): Adjust the non-linear response of steering/throttle.
- ABS (Anti-lock Braking System): Configure ABS function.
- TRIM: Digital trim adjustments.
- F.SAFT (Fail-Safe): Set fail-safe positions.
- CRAW (Crawling Mode): Activate and configure crawling specific settings.
- SVC (Servo Speed): Adjust servo speed.
- Neu.Cal (Neutral Calibration): Calibrate neutral positions.
- St.Gain (Steering Gain): Adjust steering gyro gain.
- Th.Gain (Throttle Gain): Adjust throttle gyro gain.
- Prio (Priority): Adjust channel priority.
6.3 Special Functions
ABS Function

The Anti-lock Braking System (ABS) function helps prevent wheel lock-up during braking, improving control and reducing skidding. This is particularly useful for high-speed vehicles. Configure ABS settings (e.g., brake frequency, delay) through the transmitter's menu.
Crawling Mode

The FS-GT5 offers multiple crawling modes, allowing for specialized control over RC crawlers. These modes can optimize throttle and steering response for challenging terrains. Select and configure the desired crawling mode via the transmitter's menu.
Sound and Vibration Alarm

The transmitter is equipped with sound and vibration alarms to alert the user to important events, such as low battery voltage. This provides tactile feedback, which can be useful in noisy environments or when visual attention is focused on the vehicle.
Colorful LED Light Options

The FS-GT5 features customizable LED indicator lights with six color options. These can be used for visual feedback or personalization.
7. Maintenance
- Cleaning: Use a soft, dry cloth to clean the transmitter and receiver. Do not use solvents or abrasive cleaners.
- Storage: Store the transmitter and receiver in a cool, dry place away from direct sunlight and extreme temperatures. Remove batteries from the transmitter if storing for extended periods to prevent leakage.
- Antenna Care: Avoid bending or damaging the antennas on both the transmitter and receiver. A damaged antenna can significantly reduce range and signal quality.
- Firmware: The FS-GT5 does not support online firmware updates.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power to transmitter | Dead or incorrectly installed batteries. | Check battery polarity, replace with fresh AA batteries. |
| Receiver LED not solid after powering on | Not bound to transmitter, signal interference, receiver not powered. | Re-bind transmitter and receiver. Ensure receiver is powered. Check for other 2.4GHz devices. |
| Vehicle not responding to controls | Receiver not bound, ESC not calibrated, servo/ESC connections loose, low battery. | Verify binding. Check all wiring connections. Calibrate ESC. Check transmitter and vehicle battery levels. |
| Steering/Throttle drifts or is off-center | Trim settings incorrect. | Adjust Steering Trim or Throttle Trim on the transmitter. Perform Neutral Calibration if necessary. |
| Low voltage alarm sounds frequently | Transmitter batteries are low. | Replace transmitter batteries with fresh ones. |
9. User Tips
- Model Memory: Utilize the model memory feature to save settings for different vehicles. This saves time when switching between RC cars or boats.
- Fail-Safe Setup: Always set up the fail-safe function to ensure your vehicle stops or returns to a safe state if signal is lost. This prevents runaway vehicles.
- Range Testing: Before operating your RC vehicle at full range, perform a range test in a safe, open area to confirm reliable signal reception.
- Battery Management: Keep spare AA batteries handy for the transmitter, or consider rechargeable AA batteries for convenience.
- Experiment with Settings: Don't be afraid to experiment with EPA, D/R, and EXP settings to find the control feel that best suits your driving style and vehicle.
10. Warranty and Support
The FlySky FS-GT5 Transmitter and FS-BS6 Receiver come with a 12-month manufacturer's limited warranty for defective items from the date of receipt. This warranty covers manufacturing defects but does not cover damage caused by misuse, accidents, or unauthorized modifications.
For technical support, warranty claims, or further assistance, please contact your retailer or the manufacturer's customer service. Ensure you have your purchase details and product model information available when contacting support.
Please note that the warranty does not cover items with an expired warranty period. All returned items must be in their original packaging.