1. Introduction
The LEKATO WS-70 is a compact and efficient wireless guitar system designed for musicians seeking freedom from cables. It utilizes advanced UHF digital transmission technology to provide stable, low-latency audio transmission for various musical instruments. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your WS-70 system.

Figure 1: LEKATO WS-70 Wireless Guitar System
2. Key Features
- UHF Digital Transmission: Adopts advanced UHF technology for strong anti-interference capability, ensuring no loss or lag in audio.
- Low Latency: Less than 3ms transmission delay for real-time performance.
- Extended Range: Effective transmission distance of 25-40 meters (80-131 feet).
- Multi-Channel Support: Supports up to 70 channels, allowing multiple systems to operate simultaneously without interference. One transmitter can connect to up to four receivers.
- Long Battery Life: Built-in rechargeable lithium battery provides over 4.5 hours of working time (circumstantial) on a full charge.
- Rotatable Plug: 190-degree rotatable 6.35mm plug for compatibility with various instrument input jack positions.
- Plug & Play: Simple operation with no complex setup required.
- Compact Design: Portable and lightweight for easy transport and use.

Figure 2: Low Latency Transmission

Figure 3: Compact and Portable Design
3. Package Contents
- 1 x LEKATO WS-70 Transmitter
- 1 x LEKATO WS-70 Receiver
- 1 x Dual-ended USB Charging Cable
- 1 x User Manual (this document)
4. Setup Guide
4.1 Charging the Device
Before first use, fully charge both the transmitter and receiver. Use the provided dual-ended USB cable to charge both units simultaneously. The green indicator lights will show the battery status:
- First light flashes: Battery lower than 20%
- 1 green light keeps on: 20-40% battery
- 2 green lights keep on: 41-60% battery
- 3 green lights keep on: 61-80% battery
- 4 green lights keep on: 81-100% battery (fully charged)

Figure 4: Charging and Battery Status Indicators
4.2 Connecting to Instruments and Amplifiers
- Power On: Long press the power button on both the transmitter and receiver to turn them on.
- Pairing: The system is typically pre-paired from the factory. If pairing is needed or lost, long press the signal key on both the transmitter and receiver simultaneously until they pair. The indicator lights will confirm a successful connection.
- Connect Transmitter: Plug the transmitter into your instrument's 6.35mm output jack. The rotatable plug allows for flexible positioning.
- Connect Receiver: Plug the receiver into your amplifier's 6.35mm input jack, or into a mixer or audio interface.
- Ready to Play: Once connected, the system is ready for use.
Video 1: LEKATO WS-70 Product Demonstration and Setup

Figure 5: Cable-Free Operation with Electric Guitar
5. Operating Instructions
5.1 Channel Selection
The WS-70 supports 70 channels. If you experience interference or are using multiple wireless systems, you can change the channel. Refer to the device's buttons for channel adjustment. Ensure both the transmitter and receiver are on the same channel for proper operation.

Figure 6: Channel Selection for Multiple Systems
5.2 Multi-Receiver Connection
One WS-70 transmitter can connect to up to four WS-70 receivers simultaneously without interference. This is useful for sending your instrument's signal to multiple amplifiers or monitoring systems.

Figure 7: Multi-Instrument and Multi-Receiver Setup
6. Maintenance
- Charging: Recharge the units using the provided USB cable when the battery indicator shows low power. Avoid overcharging.
- Cleaning: Wipe the units with a soft, dry cloth. Do not use liquid cleaners or solvents.
- Storage: Store the system in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: If the product cannot be powered on, switch it off and recharge it for 1-2 hours before usage.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound or intermittent signal |
|
|
| Product does not power on |
|
|
| White noise or signal degradation |
|
|
8. Specifications (WS-70)
| Feature | Specification |
|---|---|
| Model Number | WS-70 |
| Type | Guitar Transmitter Receiver |
| Signal-to-noise ratio | >86db |
| Latency | <3 ms |
| Frequency response | 20-20KHz |
| Transmission distance | 25-40m (80-131 Feet) |
| Full working hours | >4.5 hours (circumstantial) |
| Distortion | <0.05% |
| Channel | 70 channels |
| Rotatable Design | 190° |
| Battery Capacity | 700mAh |
| Is Batteries Included | Yes |
| Weight | 200g |
| Suitable For | Guitars (Electric, Bass, Electric-Acoustic), Violin, Drum, Keyboard, Bakelite guitar |

Figure 8: WS-70 Key Specifications
9. User Tips
- Battery Life: While rated for over 4.5 hours, some users report up to 5-6 hours of uninterrupted use. Actual battery life may vary based on usage and environmental factors.
- Signal Quality: The system generally provides a clear signal. However, a slight white noise might be noticeable, especially with certain effects like reverb or overdrive. This is often imperceptible during normal play.
- Compatibility: The WS-70 is compatible with a wide range of electroacoustic instruments including electric guitars, bass guitars, electric-acoustic guitars, violins, drums, and keyboards.
- Troubleshooting No Sound: If you experience no sound after charging, ensure both units are powered on and correctly paired. If issues persist, try turning the unit off and recharging for 1-2 hours.
10. Warranty and Support
The LEKATO WS-70 Wireless Guitar System comes with a standard manufacturer's warranty. For warranty claims, technical support, or further assistance, please contact your retailer or the official LEKATO customer service. Keep your purchase receipt as proof of purchase.