1. Product Overview
The AODELAN SRR-PEBBLE Wireless Shutter Release system consists of a transmitter and a receiver, designed to provide remote control for compatible cameras. It supports both wireless and wired operation, enabling various shooting modes such as autofocus, single shot, delayed release, continuous release, and Bulb shooting.
Package Contents
- 1 x Shutter Release Transmitter (with built-in CR2032 battery)
- 1 x Shutter Release Receiver (AAA batteries not included)
- 1 x Shutter Release Sync Cable (C6 or C8, depending on selection)
- 1 x Instruction Manual
- 2 x Lanyard Slings
2. Setup and Installation
Battery Installation
The transmitter comes with a built-in CR2032 lithium button cell battery. The receiver requires 2 AAA batteries (not included).
- Transmitter: The CR2032 battery is pre-installed. If replacement is needed, open the battery compartment on the back of the transmitter and insert a new CR2032 battery with the positive (+) side facing up.
- Receiver: Open the battery compartment on the back of the receiver. Insert 2 AAA batteries, ensuring correct polarity (+/-).
Connecting to Camera
The SRR-PEBBLE can be used in both wired and wireless configurations.
Wired Remote Control Setup:
- Ensure both the camera and receiver are turned off.
- Connect one end of the shutter release cable to your camera's remote port.
- Connect the other end of the cable to the receiver's remote release terminal.
- Turn on your camera and the receiver. The receiver can now function as a wired remote.
Wireless Shutter Release Setup:
- Connect one end of the shutter release cable to your camera's remote port.
- Connect the other end of the cable to the receiver's remote release terminal.
- Turn on your camera and the receiver.
- Ensure the transmitter is powered on. The transmitter will now wirelessly control the receiver, which is connected to your camera.
Cable Compatibility
The correct shutter release sync cable (C6 or C8) must be selected based on your camera model. Refer to the compatibility list below:
| Cable Model | Camera Brand | Compatible Camera Models |
|---|---|---|
| C6 | Canon | EOS R100, R8, R7, R10, R6 II, R6, R, Ra, RP, M6 II, M6, M5, 90D, 80D, 77D, 70D, 60D, SL3 (250D, 200D II), SL2 (200D), T8i (850D), SL1 (100D); T7i (800D), T7 (2000D, 1500D), T6s (760D), T6i (750D), T6 (1300D), T5i (700D), T5 (1200D), T4i (650D), T3i (600D), T3 (1100D), T2i (550D), T1i (500D); 450D; PowerShot G1 X III, G1 X II, G1 X, G16, G15, G12, G11, G10, SX70 HS, SX50HS |
| Olympus | OM-5, OM-1 II, OM-1; OM-D E-M1X, E-M1 III, E-M1 II, E-M5 III | |
| Fujifilm | X-H2, X-H2S, X-H1, GFX 50S II, GFX 50S, GFX 50R, GFX 100S II, GFX 100S, GFX100, X-T5, X-T4, X-T3, X-T2, X-T1, X-T100, X-T30 II, X-T20, X-A7, X-A5, X-E2, X-E1, X100V, X100VI, X30, XF10, X-Pro3 | |
| Pentax | K-3 III, K-3 II, K-3, K-5II, K-5, K-7, K-1, K10D, K100D, K200D, K20D, K30, K-50, K-500, istDS, DS2, DS, DL2, DL, D, 654Z | |
| C8 | Canon | EOS R1 R5 II, R5 C, R5, R3, 1DX Mark III, 1DX Mark II, 1D X, 1D C, 1Ds Mark III, 1Ds Mark II, 1Ds, 1D Mark IV, 1D Mark III, 1D Mark II N, 1D Mark II, 1D, 5D Mark IV, 5D Mark III, 5D Mark II, 5Ds, 5Ds R, 5D, 6D Mark II, 6D, 7D Mark II, 7D, 50D, 40D, 30D, 20D, 10D |
Note: Please ensure you select the correct cable model for your camera. If your camera model is not listed or you are unsure, please contact customer service for assistance.
3. Operating Modes
The AODELAN SRR-PEBBLE offers several shooting modes to enhance your photography experience.
Autofocus and Single Shot
- Half-press the shutter button on the transmitter to activate autofocus.
- Fully press the shutter button to take a single photo.
Delayed Shooting (2 Seconds)
This mode allows for a 2-second delay before the shutter fires, helping to minimize camera shake.
- Set your camera to single shooting mode.
- Press the 'Delay Button' (marked with a clock icon) on the transmitter. The camera will trigger after a 2-second delay.
Continuous Shooting
Capture a sequence of images by holding down the shutter button.
- Set your camera to continuous shooting mode.
- Press and hold the shutter button on the transmitter until the indicator light turns off, then release. The camera will begin continuous shooting.
- To stop continuous shooting, press the shutter button on the transmitter again.
Bulb Shooting
This mode allows for extended exposure times, ideal for low-light photography or light painting.
- Set your camera to BULB mode.
- Press and hold the shutter button on the transmitter for the desired exposure duration, then release. The camera will perform BULB shooting.
- To end the exposure, press the shutter button on the transmitter again.
Wireless Range
The SRR-PEBBLE operates on a 2.4GHz radio frequency, providing an approximate operating distance of 80 meters (262 feet) in open space without interference. The signal is omnidirectional (360° available).
4. Maintenance
Battery Replacement
- Transmitter (CR2032): When the LED indicator on the transmitter no longer lights up or the range decreases significantly, it's time to replace the CR2032 battery. Use a small tool to open the battery compartment and replace it with a new CR2032 battery.
- Receiver (AAA): If the receiver's indicator light is dim or it fails to respond, replace the 2 AAA batteries.
Cleaning and Storage
- Wipe the units with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Avoid exposing the device to extreme temperatures, humidity, or direct sunlight.
- Store the shutter release in a dry, cool place when not in use. If storing for an extended period, remove the AAA batteries from the receiver to prevent leakage.
5. Troubleshooting
- Device not responding: Check battery levels in both the transmitter and receiver. Ensure they are correctly installed.
- Reduced range or intermittent connection: Replace batteries. Ensure there are no major obstructions between the transmitter and receiver. Avoid strong electromagnetic interference.
- Camera not firing: Verify that the shutter release cable is securely connected to both the camera and the receiver. Check camera settings to ensure it's in a compatible mode (e.g., single shot, continuous, bulb). Ensure the correct cable (C6/C8) is being used for your specific camera model.
- Compatibility issues: Double-check the compatibility table in Section 2. If your camera model is not listed, the device may not be compatible. Contact customer support for clarification.
6. Specifications
| Feature | Detail |
|---|---|
| Model Number | SRR-PEBBLE |
| Type | Wireless Shutter Release |
| Connectivity Technology | 2.4GHz Radio Frequency |
| Maximum Range | Approx. 80 meters (262 feet) |
| Transmitter Power | 1 x CR2032 Lithium Button Cell Battery (included) |
| Receiver Power | 2 x AAA Batteries (not included) |
| Transmitter Dimensions | 67 x 36 x 13 mm (2.6 x 1.4 x 0.5 inch) |
| Receiver Dimensions | 90 x 41 x 32 mm (3.5 x 1.6 x 1.2 inch) |
| Transmitter Weight | 13 g (without battery) |
| Receiver Weight | 37 g (without battery) |
| Compatible Brands | Canon, Fujifilm, Olympus, Pentax (model-specific cables required) |
| Certifications | CE, FCC |
7. User Tips
- Minimize Camera Shake: Always use the remote for critical shots to avoid any movement from pressing the camera's shutter button directly.
- Check Camera Settings: Before shooting, ensure your camera's drive mode (single, continuous, timer, bulb) matches the desired operation with the remote.
- Battery Life: Carry spare AAA batteries for the receiver, especially during long shooting sessions, as they are not included in the package.
- Optimal Placement: For wireless use, ensure the receiver is positioned where it has a clear line of sight or minimal obstruction to the transmitter for best range performance.
- Wired Backup: The receiver can function as a wired remote, which is useful if transmitter batteries run out or in environments with heavy wireless interference.
8. Warranty and Support
For warranty information, technical support, or any questions regarding your AODELAN SRR-PEBBLE Wireless Shutter Release, please contact the seller or AODELAN customer service directly. Ensure you have your product model and purchase details ready for faster assistance.
