Introduction
This manual provides essential information for the installation, maintenance, and troubleshooting of original replacement accessories for your Dreame Bot L10 Pro series robot vacuum cleaner. These accessories are designed to ensure optimal performance and extend the lifespan of your device. Please read this manual carefully before installing or replacing any parts.
Compatible Robot Vacuum Models: Dreame Bot L10 Pro, Mova l600, Z500, DreameBot D10s Plus.
Package Contents
The Auxiliary Cleaning Kit (Model RAK18) typically includes the following original components:
| Component | Quantity | Description |
|---|---|---|
| Main Brush (Rubber Brush) | 1 | Designed for deep cleaning and tangle-free operation. |
| Side Brush | 2 | Sweeps debris from edges and corners into the main cleaning path. |
| HEPA Filter | 3 | Captures fine dust and allergens, improving air quality. |
| Mop Pad (Mop Cloth) | 3 | For wet mopping functions, effectively cleaning hard floors. |
| Brush Cover | 1 | Protects the main brush and ensures proper suction. |
Note: The cleaning tool is excluded and needs to be purchased separately if required. Side brush and brush cover are under the Dreame brand, while filters, main brush, and mop cloth may be under Dreame's sub-brand "Trouver", though all are manufactured by Dreame.
Setup and Installation
Before installing any new accessories, ensure your robot vacuum cleaner is powered off and disconnected from its charging dock.
1. Installing/Replacing Side Brushes
- Turn the robot vacuum upside down.
- Locate the side brush(es). They are usually held in place by a screw or a clip.
- If replacing, unscrew or unclip the old side brush and remove it.
- Align the new side brush with the corresponding slot and press it down until it clicks into place or secure it with the screw.
2. Installing/Replacing Main Brush and Brush Cover
- Turn the robot vacuum upside down.
- Locate the main brush cover, usually secured by two release tabs.
- Press the release tabs inwards to open and remove the brush cover.
- Lift out the old main brush.
- Insert the new main brush, ensuring the ends align with the slots.
- Replace the brush cover, pressing down until it clicks securely into place.
3. Installing/Replacing HEPA Filters
- Open the top cover of the robot vacuum to access the dustbin.
- Remove the dustbin from the robot.
- Open the dustbin cover and remove the old HEPA filter.
- Insert the new HEPA filter into the designated slot in the dustbin. Ensure it is seated correctly.
- Close the dustbin cover and reinsert the dustbin into the robot vacuum.
4. Installing/Replacing Mop Pads
- Locate the water tank and mop pad attachment on the robot vacuum.
- Remove the old mop pad from the water tank module.
- Attach the new mop pad securely to the water tank module, ensuring it is flat and covers the entire surface.
- Reattach the water tank module with the new mop pad to the robot vacuum.
Operating with Accessories
Once the accessories are correctly installed, your Dreame Bot L10 Pro series robot vacuum is ready for operation. These parts work in conjunction to provide efficient cleaning:
- Side Brushes: Sweep dust and debris from edges and corners, directing them towards the main brush.
- Main Brush: Agitates and lifts dirt from carpets and hard floors, feeding it into the suction inlet.
- HEPA Filter: Filters out fine particles from the air as it passes through the dustbin, preventing them from being released back into your home.
- Mop Pads: When wet, they wipe hard floor surfaces to remove stains and fine dust after vacuuming.
Maintenance
Regular maintenance of your robot vacuum's accessories is crucial for optimal performance and longevity. The frequency of cleaning and replacement depends on usage and environment.
1. Side Brushes
- Cleaning: Regularly check for hair or debris tangled around the brushes. Use a cleaning tool or scissors to carefully cut and remove any tangles. Wipe the brushes with a damp cloth.
- Replacement: Replace side brushes every 3-6 months, or when they become visibly worn or bent, to ensure effective edge cleaning.
2. Main Brush
- Cleaning: Remove the main brush and use the provided cleaning tool (if available) or scissors to cut and remove any hair or debris wrapped around it. Clean the brush bearings as well.
- Replacement: Replace the main brush every 6-12 months, or if bristles are significantly worn or damaged, to maintain strong suction and cleaning efficiency.
3. HEPA Filters
- Cleaning: Tap the filter gently over a trash can to remove accumulated dust. Do NOT wash HEPA filters with water, as this can damage the filter material.
- Replacement: Replace HEPA filters every 2-3 months, or more frequently if you have pets or allergies, to maintain optimal filtration performance.
4. Mop Pads
- Cleaning: After each use, remove the mop pad and wash it thoroughly with water. Hand washing is recommended to preserve the fabric. Allow it to air dry completely before reattaching.
- Replacement: Replace mop pads every 3-6 months, or when they show signs of wear, reduced absorbency, or persistent staining, to ensure effective mopping.
Troubleshooting
If you encounter issues with your robot vacuum's cleaning performance, check the accessories first. Here are some common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Reduced cleaning efficiency (vacuuming) | Clogged HEPA filter, tangled main/side brushes, worn brushes. | Clean or replace HEPA filter. Clean main and side brushes. Replace worn brushes. |
| Robot leaves streaks or doesn't mop effectively | Dirty or worn mop pad, insufficient water in tank. | Clean or replace mop pad. Ensure water tank is filled. |
| Side brush not spinning or making noise | Hair/debris tangled, brush motor issue, brush not installed correctly. | Remove tangles. Reinstall side brush. If problem persists, contact support. |
| Main brush making unusual noise | Hair/debris tangled, brush bearings dirty/damaged. | Clean main brush and bearings. Replace main brush if damaged. |
Specifications
| Attribute | Detail |
|---|---|
| Brand Name | dreame |
| Model Number (Accessory Kit) | RAK18 |
| Compatible Robot Vacuum Models | Dreame Bot L10 Pro, Mova l600, Z500, DreameBot D10s Plus |
| Type | Vacuum Cleaner Parts (Mop Cloths, Side Brushes, Main Brush, HEPA Filters, Brush Cover) |
| Material | Rubber, Metal, PVC |
| High-concerned chemical | None |
| Origin | Mainland China |
| Package Weight | 0.2 kg |
| Package Dimensions (L x W x H) | 10 cm x 15 cm x 5 cm |
User Tips
- Use Original Parts: Always use original Dreame replacement parts to ensure perfect fit, optimal performance, and to avoid potential damage to your robot vacuum. Generic parts may not offer the same quality or compatibility.
- Regular Checks: Make it a habit to check brushes and filters weekly, especially if you have pets, to prevent clogs and maintain suction power.
- Mop Pad Care: For best mopping results, pre-wet the mop pad before attaching it to the water tank.
- Filter Longevity: While HEPA filters should not be washed, gently tapping them to dislodge dust can help extend their effective life between replacements.
Warranty and Support
For warranty information, technical support, or to purchase additional original replacement parts, please refer to the official Dreame website or contact your authorized retailer. Keep your purchase receipt as proof of purchase for warranty claims.
PDF User Manual: A detailed user manual for the accessory kit (Model RAK18) is available in PDF format. You can access it here for further information.
