1. Introduction
The Flysky FS-CVT01 is a voltage collection module designed for use with compatible Flysky RC receivers (iA6B, iA4B, iA10) in various remote-controlled models such as cars, boats, and aircraft. This module allows for real-time monitoring of voltage, providing essential telemetry data to your compatible Flysky transmitter.
2. Package Contents
Upon opening your package, please verify that all items are present and in good condition:
- 1x FS-CVT01 Voltage Collection Module
- 1x Qualified Certificate
3. Specifications
| Feature | Specification |
|---|---|
| Model Number | CVT01 |
| Receiver Compatibility | iA6B, iA4B (direct use), iA10 (requires conversion line) |
| Suitable Models | Car, Boat, Aircraft |
| Acquisition Voltage Range | -100V to 100V DC |
| Accuracy | 0.1V DC |
| Module Input Power | 9mA (TYPE) |
| Max Number of Series | 15 |
| Body Weight | 6.0g |
| Operating Input Power | 4.0-6.5V DC |
| Detection Terminal Anti-reverse Function | Yes (reverse connection displays negative value) |
| Dimensions (L*W*H) | 31 x 15 x 8.5 mm |
| Appearance Color | Black |
| Material | Composite Material |
| Recommended Age | 14+ years |
4. Setup & Installation
Follow these steps to properly install and connect your FS-CVT01 Voltage Collection Module:
- Connect to Receiver: Connect the module's output (labeled 'OUT') to a compatible telemetry port on your Flysky receiver (iA6B, iA4B). For iA10 receivers, a conversion line may be required.
- Connect Voltage Input: Connect the module's input wires (labeled 'IN') to the power source you wish to monitor. Ensure correct polarity; while the module has an anti-reverse function, proper connection is always recommended. The red wire is positive (+), and the black wire is negative (-).
- Secure Module: Mount the module securely within your RC model using appropriate adhesive or fasteners, ensuring it does not interfere with other components or moving parts.
5. Operation
Once the FS-CVT01 module is correctly installed and powered, it will begin collecting voltage data from the connected source. This data is then transmitted to your compatible Flysky transmitter.
- Power On: Power on your RC model and then your Flysky transmitter.
- LED Indicator: The LED on the FS-CVT01 module will illuminate, indicating that it is powered and operating.
- Transmitter Display: Navigate to the sensor or telemetry display on your Flysky transmitter (e.g., FSi6, FSi10) to view the real-time voltage readings.
6. Maintenance
The FS-CVT01 module requires minimal maintenance. To ensure optimal performance and longevity:
- Keep the module clean and free from dust, dirt, and moisture.
- Avoid exposing the module to extreme temperatures or direct sunlight for prolonged periods.
- Regularly inspect the wiring for any signs of wear, fraying, or damage. Replace damaged wires immediately.
- Ensure all connections remain secure during operation.
7. Troubleshooting
- No Voltage Reading on Transmitter:
- Check all connections between the module, receiver, and power source. Ensure they are secure and correctly polarized.
- Verify that the module is receiving power (check the LED indicator).
- Ensure the sensor function is enabled on your Flysky transmitter. Refer to your transmitter's manual for instructions on activating telemetry sensors.
- Confirm that your receiver is compatible with the FS-CVT01 module and supports telemetry.
- Negative Voltage Reading:
- A negative voltage reading (e.g., -14.42V) indicates that the voltage input wires ('IN') are connected in reverse polarity. Disconnect and re-connect with the correct positive and negative terminals.
- Inaccurate Readings:
- Ensure the voltage source is stable and within the module's specified acquisition range (-100V to 100V DC).
- Check for any loose connections or interference that might affect signal integrity.
8. User Tips
- Plug and Play: Many users find the FS-CVT01 to be a 'plug and play' device, indicating straightforward installation.
- Activate Sensor Function: Remember to turn on the sensor function or telemetry display on your Flysky controller after installation to view the voltage data.
9. Warranty & Support
For warranty information and technical support, please refer to the official Flysky website or contact your authorized dealer. Keep your purchase receipt as proof of purchase.