Kamoer Micro Peristaltic Pump KEF Instruction Manual

1. Product Overview

The Kamoer KEF Micro Peristaltic Pump is a compact, low-flow liquid dosing pump designed for various applications, including analytical laboratories, automatic car wash machines, UAV spraying, sweeping robots, and ink printing. It features a brush motor, gear transmission, and a quick-release pump head for easy tube replacement. The pump is capable of transferring both viscous and non-viscous liquids, with controllable flow direction.

Key Features:

• Compact size and easy operation.
• Gear transmission design for reduced hose wear and extended life.
• No liquid backflow.
• Removable pump head for easy tube replacement.
• Pump head direction adjustable (rotatable 360°).
• Available in 12V and 24V DC brush motor options.
• Uses domestic Perx AYL pump tube (life 1000H).
• Optional pump tube sizes (04#, 06#, 10#) to meet different flow requirements.
• 3-roller pulse moderate design.
• Through-plate fixing installation method with quick-release pump head.
• Transmission mode: gear transmission, first-stage reduction ratio 1:14.
• Suitable for pump tubes with wall thickness 1.0.

2. Setup Instructions

2.1 Unpacking and Inspection

Carefully unpack the pump and inspect for any visible damage. Ensure all components listed in the packing list are present:

• 1 × Kamoer KEF Peristaltic Pump (12V or 24V, depending on model)
• 1 × Silicone tube (e.g., S10: Silicone 3.0*5.0 mm for 12V model)

2.2 Connecting Silicone Tubing

Connect the silicone tubing to the pump head's inlet and outlet ports. Ensure a snug fit to prevent leaks.

2.3 Power Connection

Identify the positive ("+") and negative ("-") terminals on the pump motor. The red side is typically positive, and the other side is negative. Connect your power adapter or DC power source accordingly.

Important: According to the motor wiring diagram (refer to the official PDF manual), the positive pole of the power supply should be connected to the positive pole and the negative pole should be connected to the negative pole.

Refer to Video 1 for a visual guide on connecting the power adapter and observing the pump in operation.

3. Operating Instructions

3.1 Basic Operation

Once the tubing and power are connected, apply the rated DC voltage (12V or 24V, depending on your pump model) to the pump. The pump will begin to transfer liquid. Ensure the pump tube inlet is completely submerged in the liquid to ensure proper absorption.

3.2 Controlling Flow Direction

The flow direction of the liquid can be changed by reversing the polarity of the power connection to the motor. If the liquid is flowing in the undesired direction, disconnect the power, swap the positive and negative connections, and then reapply power.

Video 1 demonstrates how reversing the "+" and "-" connections changes the direction of flow.

4. Maintenance

4.1 Pump Tube Replacement

The pump head is designed for quick release, making tube replacement straightforward. Regularly inspect the pump tube for wear, cracks, or hardening, especially if transferring aggressive liquids. Replace the tube as needed to maintain optimal performance and prevent leaks.

The pump uses domestic Perx AYL pump tubes, with a typical life of 1000 hours. Ensure replacement tubes match the original specifications (e.g., 3mm ID × 5mm OD for the 85ml/min model).

4.2 General Cleaning

Keep the exterior of the pump clean and free from dust and debris. If liquid spills occur, wipe them immediately. Do not immerse the pump in water or other liquids for cleaning.

5. Troubleshooting

• No Flow or Reduced Flow:
  • Check power connections and ensure correct voltage is applied.
  • Verify the pump tube is not kinked, blocked, or worn out.
  • Ensure the pump tube inlet is fully submerged in the liquid.
  • Inspect for air bubbles in the tubing, which may indicate a loose connection or an empty reservoir.
• Incorrect Flow Direction:
  • Reverse the polarity of the power connections to change the flow direction.
• Hose Damage or Leakage:
  • Improper hose selection or chemical incompatibility with the liquid media can cause rapid hose damage. Always check chemical compatibility or conduct an immersion test if unsure.
  • Liquid leakage accidents caused by hose rupture depend on the liquid medium and your specific application conditions. Regular inspection and timely replacement of the pump tube are crucial.
• Premature Product Damage:
  • Operating the pump in a bad working environment (e.g., exceeding 45°C temperature or 70% humidity, non-condensing) can lead to premature damage.
  • High overload work may also cause premature damage. Ensure the pump is used within its specified operating parameters.

6. Specifications

6.1 Technical Parameters

6.2 Reference Flow Rate (unit: ml/min)

*Note: The above parameters are measured without pressure using pure water at 20°C room temperature and standard atmospheric pressure. Actual flow rate may vary depending on media, outlet pressure, motor speed, etc. Data is for reference only and can be customized.

6.3 Dimensions

The pump is available with different mounting options. Detailed technical drawings for straight-through front mounting and straight-through back mounting are available in the official PDF manual.

6.4 Certifications

• CN 309352689 S (Design Patent Certificate)
• ROHS Certification
• CE Certification

7. User Tips

• Voltage Compatibility: Always ensure your power supply voltage matches the rated voltage of your specific pump model (12V or 24V) to prevent damage.
• Tube Maintenance: Regularly check the pump tubing for signs of wear or chemical degradation, especially when pumping different types of liquids. Proactive replacement can prevent unexpected failures.
• Proper Submersion: For consistent flow, ensure the inlet tube is always fully submerged in the liquid source.

8. Warranty and Support

For detailed warranty information, technical support, or specific inquiries, please contact Kamoer Fluid Tech (Shanghai) Co., Ltd. directly. You can find contact information and additional resources on their official website: www.kamoer.com.

An official user manual in PDF format is available for download, which contains comprehensive details and diagrams:

View User Manual (PDF)

The company reserves the right to improve product appearance and technical specifications without prior notice. Any changes will be made without prior notice.