MOES WiFi RF433 Smart Curtain Switch Module

1. Introduction

The MOES WiFi RF433 Smart Curtain Switch Module (MS-108WR) is designed to integrate with your existing electric roller blinds or shutter motors, transforming them into smart, controllable devices. This module allows for convenient control via a smartphone application (Smart Life/Tuya), RF433 remote control, and voice commands through popular smart assistants like Amazon Alexa and Google Home. It supports scheduling, countdown timers, and family sharing for enhanced home automation.

Note: Calibration may not be suitable for heavy metal blinds due to material restrictions.

Figure 1: MOES Smart Curtain Switch Module and control options

2. Safety Information

• Ensure the power supply is disconnected before installation or maintenance.
• Installation should be performed by a qualified electrician in accordance with local wiring regulations.
• Do not exceed the maximum load capacity of 500W.
• This module is designed for AC motors (90-250V AC 50/60Hz) and is not compatible with DC motors.
• Ensure your motor has 4 wires (Live, Neutral, Up, Down) for proper connection.
• Keep the device away from water and high humidity environments.
• Do not attempt to repair or modify the device yourself.

3. Package Contents

• MOES WiFi RF433 Smart Curtain Switch Module (MS-108WR)
• User Manual (this document)

Note: Curtain motor and RF433 remote controller are not included and must be purchased separately.

4. Specifications

5. Installation

Before proceeding with installation, ensure the main power supply is turned OFF at the circuit breaker to prevent electric shock.

5.1 Wiring Diagrams

The module requires a 4-wire motor (Live, Neutral, Up, Down). It can be installed either with an existing traditional curtain switch or directly with the motor.

Figure 2: Wiring Diagram

5.1.1 Wiring with a Traditional Curtain Switch

1. Connect the Live (L) wire from the power supply to the 'L' terminal on the module.
2. Connect the Neutral (N) wire from the power supply to the 'N' terminal on the module.
3. Connect the 'L' terminal of the traditional curtain switch to the 'L' terminal on the module.
4. Connect the 'S1' terminal on the module to the 'Up' terminal of the traditional curtain switch.
5. Connect the 'S2' terminal on the module to the 'Down' terminal of the traditional curtain switch.
6. Connect the 'Curtain Motor' terminals (Up, Down, Neutral) from the motor to the corresponding 'Curtain Motor' terminals on the module.
7. Ensure all connections are secure.

5.1.2 Wiring without a Traditional Curtain Switch (Motor Only)

1. Connect the Live (L) wire from the power supply to the 'L' terminal on the module.
2. Connect the Neutral (N) wire from the power supply to the 'N' terminal on the module.
3. Connect the 'Curtain Motor' terminals (Up, Down, Neutral) from the motor to the corresponding 'Curtain Motor' terminals on the module.
4. Ensure all connections are secure.

Important Notes:

• A Neutral wire is required for the module to function.
• The module only supports 2.4 GHz Wi-Fi networks.
• No separate hub is required for Wi-Fi control.

6. Setup

6.1 App Pairing (Smart Life/Tuya App)

1. Download the "Smart Life" or "Tuya Smart" app from your smartphone's app store (iOS or Android).
2. Register or log in to your account.
3. Power on the curtain module. The Wi-Fi indicator light on the module should be blinking rapidly (if not, press and hold the reset button on the module for 5 seconds until it blinks rapidly).
4. In the app, tap '+' to add a new device.
5. Select "Curtain Switch" or "Curtain Module" from the device list.
6. Follow the in-app instructions to connect the module to your 2.4GHz Wi-Fi network. Ensure your phone is also connected to the same 2.4GHz network.
7. Once successfully added, you can rename the device and assign it to a room.

6.2 RF Remote Pairing

This module is built-in with RF433 frequency and can be controlled by an RF433 remote controller with 1527 encoding.

Figure 3: RF Remote Control Function Description

6.2.1 Channel Setting (for 9-channel remote)

1. Press the 'SET' button on the remote. The digital tube will flash, indicating setup mode.
2. Press the '<' button to increase the channel value.
3. Press the '>' button to decrease the channel value.
4. When the desired channel is set, press the 'SET' button again to exit setup mode. The digital tube will stop flashing.

6.2.2 Transmit Code

To transmit a signal from the remote to the module:

1. Press any key (e.g., '<', '||', '>') on the remote while it is NOT in setup mode.
2. The red indicator in the lower right corner of the remote will flash rapidly, indicating it is transmitting.
3. Release the key to stop transmitting. The digital tube will stop lighting.

6.3 Curtain Calibration

Calibration ensures accurate percentage control of your curtains. This is done via the Smart Life/Tuya App.

Figure 4: Curtain Calibration in App

1. Open the Smart Life/Tuya app and select your curtain module.
2. Navigate to the settings or calibration section within the device interface.
3. Follow the on-screen prompts to calibrate the curtain's open and close limits. This typically involves fully opening and fully closing the curtain and confirming these positions in the app.

7. Operation

7.1 App Control

The Smart Life/Tuya app provides comprehensive control over your curtain module.

Figure 5: Smart APP Remote Control

• Open/Close: Tap the 'Open' or 'Close' buttons in the app to fully open or close your curtains.
• Percentage Adjustment: Use the slider in the app to adjust the curtain's opening percentage (e.g., 50% open).
  

  Figure 6: Percentage Adjustment in App

• Scheduling: Set schedules to automatically open or close your curtains at specific times. You can configure daily, weekly, or one-time schedules.
  

  Figure 7: Adding a Schedule in App
• Countdown Timer: Use the countdown timer feature to automatically open or close curtains after a set duration (e.g., 1 minute to 6 hours).
  

  Figure 8: Schedules & Countdown Timer

7.2 Voice Control

Integrate your curtain module with Amazon Alexa or Google Home for hands-free voice control.

Figure 9: Hands-free Voice Control

• Connecting to Voice Assistants: Follow the instructions in the Smart Life/Tuya app to link your account with Amazon Alexa or Google Home.
• Voice Commands: Once linked, you can use commands such as:
  • "Alexa, turn on/off [Curtain Name]"
  • "Hey Google, open/close [Curtain Name]"
  • "Alexa, open [Curtain Name] to 50%"

7.3 Traditional Manual Control

If the module is wired with a traditional curtain switch, you can still use the physical switch to control the curtains. Pressing the switch once (on the same button) after moving up/down will manually stop the motor.

Figure 10: Use with Traditional Switch

7.4 Family Sharing & Group Control

The module supports family sharing and group control features within the Smart Life/Tuya app.

Figure 11: Family Sharing

• Family Sharing: Share control of the smart curtain module with other family members through the app. This allows multiple users to operate the same curtain.
• Group Control: Create groups of multiple curtain modules within the app to control several blinds simultaneously with a single command.
  

  Figure 12: Group Control

8. User Tips

• For optimal performance, ensure your Wi-Fi network is stable and operating on the 2.4GHz band.
• If using an RF433 remote, confirm it uses 1527 encoding for compatibility.
• When calibrating, ensure the curtains move freely to their full open and closed positions for accurate percentage control.
• If you change your Wi-Fi network or password, you will need to reconfigure the module through the app.
• The module is versatile and can be used with various types of curtains, shutters, and blinds, provided they have a compatible 4-wire AC motor.

9. Troubleshooting

10. Maintenance

• Keep the module clean and free from dust. Use a dry, soft cloth for cleaning.
• Avoid exposing the module to extreme temperatures or direct sunlight.
• Regularly check wiring connections for any signs of wear or looseness.
• Ensure your Smart Life/Tuya app is updated to the latest version for optimal performance and features.

11. Warranty and Support

The MOES WiFi RF433 Smart Curtain Switch Module comes with a 1-year manufacturer warranty from the date of purchase.

For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or the manufacturer directly. Refer to the product packaging or the official MoesHouse website for contact information.

Please retain your proof of purchase for warranty purposes.