1. Product Overview
The Baseus 20W Type C PD Quick Charger is a compact and efficient power adapter designed for fast charging a wide range of devices, including smartphones, tablets, and other small electronics. It supports multiple fast charging protocols to ensure optimal charging speed and safety.
Figure 1: Baseus 20W Type C PD Quick Charger
2. Setup and Installation
- Plug into Power Outlet: Insert the charger's prongs into a standard AC power outlet (AC 100-240V, 50/60Hz). The charger is designed with a wide voltage range for global use.
- Connect Charging Cable: Connect a compatible USB-C to USB-C or USB-C to Lightning cable (not included with the charger) to the Type-C output port on the charger.
- Connect to Device: Connect the other end of the charging cable to your mobile phone, tablet, or other electronic device.
Figure 2: Charger connected to a device
Video 1: Demonstrating the compact size and charging process of the Baseus 20W PD Quick Charger.
3. Operating Instructions
The Baseus 20W Type C PD Quick Charger features intelligent technology for efficient and safe charging:
- Automatic Load Detection: The charger automatically detects the connected device and adjusts the output current to provide the optimal charging speed.
- Fast Charging: Supports various fast charging protocols including USB Power Delivery (PD 3.0), Qualcomm Quick Charge (QC 3.0), Apple2.4, and BC 1.2. This allows for rapid charging of compatible devices. For example, it can charge an iPhone from 0% to approximately 50% in 30 minutes.
- Smart Shift Battery Protection: This feature intelligently manages the charging process to protect your device's battery. It provides a 20W flash charge from 0% to 80% and then switches to a trickle charge from 80% to 99% to prevent overcharging and extend battery life.
Figure 3: Fast Charging Speed Comparison
Figure 4: Smart Shift Battery Protection
4. Safety Features
The charger incorporates multiple smart chips and protection mechanisms to ensure safe and reliable operation:
- Triple Smart Chips: Includes a power management chip (for over-current, over-voltage, short-circuit, and over-temperature protection), a synchronous rectification chip (to stabilize DC and reduce power loss), and a PD fast charging protocol chip (for automatic device recognition and protection).
- Comprehensive Protections: Built-in safeguards against over-voltage, over-current, over-power, electrostatic discharge, short-circuit, and over-temperature.
Figure 5: Triple Smart Chips for Safe Fast Charging
Figure 6: Load Detection and Multiple Safety Protections
5. Maintenance
- Keep the charger dry and away from moisture.
- Avoid exposing the charger to extreme temperatures.
- Do not disassemble or attempt to repair the charger yourself.
- Inspect the charger and cable regularly for any signs of damage. Discontinue use if any damage is found.
- Unplug the charger from the power outlet when not in use.
6. Troubleshooting
- Device not charging:
- Ensure the charger is securely plugged into a working power outlet.
- Verify that the charging cable is properly connected to both the charger and your device.
- Check if the charging cable is damaged. Try a different cable if available.
- Confirm your device is compatible with USB-C charging.
- Slow charging:
- Ensure your device and charging cable support fast charging protocols (PD, QC). Using a non-fast charging cable or an incompatible device will result in standard charging speeds.
- Some devices may limit charging speed when the battery is nearly full to protect battery health.
- Charger making unusual noises (e.g., cracking/buzzing):
- While some electronic devices may emit faint sounds, loud or persistent cracking/buzzing is unusual. Discontinue use immediately if you notice any unusual noises, smells, or excessive heat.
- Charger or device overheating:
- The charger is designed for low-temperature operation. If the charger or your device becomes excessively hot during charging, unplug it immediately. This could indicate a fault with the charger, cable, or device.
7. Specifications
| Attribute | Value |
|---|---|
| Brand Name | BASEUS |
| Model Number | CCXFK20E |
| Type | Travel Charger |
| Input | AC 100V-240V~, 50/60Hz, 0.8A Max |
| Output Interface | Type C |
| Output | 5V/3A, 9V/2A, 9V/2.22A, 12V/1.67A, 15V/1.3A (20W Max) |
| Max. Output Power | 20W |
| Applied Fast Charge Protocols | USB PD, Other, BC1.2, Qualcomm Quick Charge |
| Certification | RoHS, pse, FCC, ETL, CE |
| Size | About 30mm * 30mm * 71mm |
| Product Weight | 42g |
| GaN | No |
Figure 7: Detailed Product Parameters
8. Compatibility
The Baseus 20W Type C PD Quick Charger offers broad compatibility:
- For Apple Devices (with Type-C to Lightning cable):
- PD 20W: For Apple iPhone 12/12 mini/12 Pro/12 Pro Max, iPhone 13, iPhone 14, iPhone 15 series.
- PD 18W: For Apple iPhone 11/11 Pro/11 Pro Max, Apple SE2, Apple XS/XS Max/XR/X, Apple 8/8 Plus.
- Regular charging: For Apple iPhone 7/7 Plus, Apple 6/6 Plus/6s/6s Plus.
- Tablets: For iPad Pro 10.5" 2017, iPad Pro 9.7" 2016, iPad Air3 10.5" 2019, iPad Mini 7.9" 2019.
- For Android Devices (with Type-C to Type-C cable):
- Suitable for Huawei, Xiaomi, Samsung phones and tablets that support PD 3.0 or QC 3.0.
- Other Devices: Compatible with power banks, handheld fans, wireless stereos, desk lamps, and other small electronics that charge via USB-C.
Note: This test list is related to product models and software versions. Software upgrades may affect compatibility. The product may be compatible with more models in actual use.
Figure 8: Device Compatibility Overview
9. User Tips
- Cable Not Included: This product does not provide a data cable. You will need to purchase a compatible USB-C to USB-C or USB-C to Lightning cable separately to use the charger.
- Optimal Performance: For the fastest charging speeds, ensure both your device and the charging cable support the Power Delivery (PD) or Quick Charge (QC) protocols.
- Portability: Weighing only 42g and with a compact size (approx. 30x30x71mm), this charger is highly portable and ideal for travel or daily carry.
- Unusual Sounds: If the charger emits any loud or persistent cracking/buzzing sounds, or if you notice any unusual smells or excessive heat, immediately unplug it from the power outlet and discontinue use.
Figure 9: Compact and Portable Design
Figure 10: Easy to Carry
10. Warranty and Support
For warranty information, technical support, or further inquiries regarding your Baseus 20W Type C PD Quick Charger, please refer to the official Baseus website or contact their customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.