Baseus CRJS03

Contents

Baseus Super Energy Pro Car Jump Starter User Manual

Model: CRJS03 | Brand: Baseus

1. Introduction

The Baseus Super Energy Pro Car Jump Starter is a versatile and essential device designed to provide emergency jump-starting for vehicles and serve as a portable power bank for charging electronic devices. With a high peak current and robust battery capacity, it ensures reliable performance even in challenging conditions. This manual provides detailed instructions for safe and effective use, maintenance, and troubleshooting.

2. Safety Information

Please read and understand all safety instructions before using this product. Failure to follow these instructions may result in electric shock, fire, or serious injury.

General Safety Precautions:

  • Do not expose the product to rain or wet conditions.
  • Do not disassemble the product. Refer all servicing to qualified personnel.
  • Keep out of reach of children.
  • Use only the intelligent ignition clamps provided with the product.
  • Ensure proper polarity when connecting to a vehicle battery (Red to Positive, Black to Negative). Reverse connection can cause irreversible damage.
  • Do not use the jump starter if the battery clamps or cables are damaged.
  • Do not jump start a vehicle if the jump starter unit is visibly damaged or swollen.
  • Avoid operating in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
  • Do not store the jump starter in direct sunlight or in areas where the temperature exceeds 60°C (140°F).

Built-in Safety Protections:

This device incorporates nine safety protection designs to ensure safe operation:

  • Lithium polymer batteries
  • Overcharge protection
  • Voltage stabilization protection
  • Constant current protection
  • Short-circuit protection
  • Over-discharge protection
  • Reverse connection protection
  • Overheat protection
  • Overcurrent protection
Diagram showing nine safety protection icons

Diagram illustrating the nine safety protection features of the jump starter.

3. Package Contents

Verify that all items are present in your package:

  • Baseus Super Energy Pro Car Jump Starter Unit
  • Intelligent Ignition Clamps
  • USB-C Charging Cable
Image showing the jump starter unit, intelligent clamps, and USB-C cable

Contents of the Baseus Super Energy Pro Car Jump Starter package.

4. Product Overview

The Baseus Super Energy Pro Car Jump Starter is designed for ease of use and reliability. Key features include:

  • Digital Display: A precise digital display shows the current battery percentage, allowing you to monitor the charge level.
  • Multi-functional Flashlight: Integrated flashlight with three modes for various situations:
    • Always On: For general outdoor lighting.
    • SOS Mode: Three long and three short flashes for emergency signaling.
    • Burst Mode: Flashing alternately for warning purposes.
  • Dual Functionality: Acts as both a car jump starter and a portable power bank for charging phones and other digital products via USB and Type-C outputs.
  • Low Temperature Operation: High discharge rate cells and smart power supply IC enable normal operation in temperatures as low as -20°C.
  • Low Power Consumption: Maintains 85% of battery for a year from full power due to ultra-low 0.05mA power consumption.
Hand holding jump starter with flashlight on and digital display showing battery percentage

Jump starter unit with digital display and flashlight in use.

Diagram showing flashlight modes: Always on, SOS, Burst

Flashlight modes for outdoor lighting, SOS, and warning.

5. Specifications

FeatureSpecification
NameBaseus Super Energy Pro Car Jump Starter
ModelCRJS03
Capacity12000mAh/3.7V/44.4Wh
Rated Output Capacity7900mAh
Input5V/3A (Max)
USB Output5V/2.4A (Max)
Type-C Output5V/3A
Starting Voltage12V
Starting Current600A
Peak Current1000A
Suitable for12V 6.0L Gasoline Car / 12V 3.5L Diesel Car
Dimensions163mm x 83mm x 36.5mm
WeightApprox. 470g
Shell MaterialSilicon
Battery TypeLi-Polymer Battery
CertificationCE
FeaturesWith Flashlight, Built-in Cables, Digital Display
Quick Charge SupportNo
Product dimensions and specifications diagram

Detailed product dimensions and specifications.

Icons of various vehicle types supported by the jump starter

The jump starter supports various vehicle types including Sedans, SUVs, Commercial Vehicles, Minivans, Motorcycles, Pickup trucks, and Electric cars.

6. Setup

Charging the Jump Starter:

Before first use, fully charge the jump starter. Connect the provided USB-C charging cable to the Type-C input port on the jump starter and to a suitable 5V/3A (Max) USB power adapter (not included). The digital display will show the charging progress. Once fully charged, the display will show 100%.

It is recommended to fully charge the device every 3-6 months to maintain optimal battery health, even if not in use, as it has very low power consumption and can maintain 85% charge for up to a year.

7. Operating Instructions

7.1. Jump Starting a Vehicle

Follow these steps to safely jump start your vehicle:

  1. Connect Clamps: Insert the intelligent ignition clamps into the EC5 interface on the jump starter unit. The clamp indicator light will flash red and green alternately, indicating it's ready.
  2. Clip to Battery: Open the vehicle's hood. Clip the red positive (+) clamp to the positive (+) terminal of the car battery. Clip the black negative (-) clamp to the negative (-) terminal of the car battery.
  3. Start Vehicle: Go into the car and start the engine.
  4. Remove Immediately: Once the car starts, immediately remove the intelligent ignition clamps from the car battery terminals, then disconnect them from the jump starter unit.

Important Safety Note: Ensure the red clamp is connected to the positive terminal and the black clamp to the negative terminal. Reverse connection may cause irreversible damage to the jump starter and/or the vehicle's electrical system.

Step-by-step guide for jump starting a car

Visual guide for the 3-step jump start process.

7.2. Using as a Power Bank

The jump starter can also charge your electronic devices:

  1. Connect your device's charging cable to either the USB output (5V/2.4A Max) or the Type-C output (5V/3A) port on the jump starter.
  2. The jump starter will automatically begin charging your device.
Jump starter charging a smartphone

The jump starter can also function as a power bank for mobile devices.

7.3. Using the Flashlight

To activate the flashlight and cycle through its modes:

  1. Press and hold the power button to turn on the flashlight (Always On mode).
  2. Press the power button once to switch to SOS mode.
  3. Press the power button again to switch to Burst mode.
  4. Press the power button a third time to turn off the flashlight.

8. Maintenance

  • Charging: To prolong battery life, fully charge the jump starter at least once every 3-6 months, even if it has not been used.
  • Cleaning: Use a soft, dry cloth to clean the device. Do not use harsh chemicals or abrasive materials.
  • Storage: Store the jump starter in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure it is stored with a partial charge (around 50-80%) for optimal long-term battery health.

9. Troubleshooting

Device Not Turning On:

  • Ensure the device is charged. Check the digital display for battery percentage.
  • If the battery is depleted, connect it to a power source using the USB-C cable.

Vehicle Not Starting:

  • Check the battery level of the jump starter. It should have sufficient charge (ideally above 50%).
  • Ensure the intelligent ignition clamps are securely connected to the jump starter's EC5 interface.
  • Verify that the clamps are correctly attached to the car battery terminals: red to positive (+), black to negative (-).
  • Check if the car battery terminals are clean and free of corrosion.
  • If the car still doesn't start after a few attempts, there might be a larger issue with the vehicle's battery or starter system. Consult a mechanic.

Device Not Charging:

  • Ensure the USB-C cable is properly connected to both the jump starter and the power adapter.
  • Try a different USB-C cable or power adapter.
  • Verify the power adapter meets the 5V/3A (Max) input requirement.

Flashlight Not Working:

  • Ensure the device has sufficient battery charge.
  • Press and hold the power button to activate the flashlight.

10. User Tips

  • Always check the jump starter's battery percentage on the digital display before heading out, especially on long trips or in cold weather.
  • Keep the jump starter charged and stored in your vehicle for immediate access during emergencies.
  • Familiarize yourself with the flashlight's SOS and Burst modes for potential emergency situations.
  • For optimal performance in extremely cold conditions, keep the jump starter in a warmer part of the car (e.g., glove compartment) until needed.

11. Warranty and Support

For warranty information, technical support, or service inquiries, please contact the retailer or manufacturer directly. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.