ADVANTECH logoADVANTECH logo 1NMAP
User GuideADVANTECH NMAP Router AppNMAP Router App

NMAP Router App

© 2023 Advantech Czech s.r.o. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photography, recording, or any information storage and retrieval system without written consent.
Information in this manual is subject to change without notice, and it does not represent a commitment on the part of Advantech.
Advantech Czech s.r.o. shall not be liable for incidental or consequential damages resulting from the furnishing, performance, or use of this manual.
All brand names used in this manual are the registered trademarks of their respective owners. The use of trademarks or other designations in this publication is for reference purposes only and does not constitute an endorsement by the trademark holder.
Used symbols

ADVANTECH NMAP Router App - symbols Danger – Information regarding user safety or potential damage to the router.
ADVANTECH NMAP Router App - symbols 1 Attention – Problems that can arise in specific situations.
ADVANTECH NMAP Router App - symbols 2 Information – Useful tips or information of special interest.
ADVANTECH NMAP Router App - symbols 3 Example – Example of function, command or script.

Changelog

1.1 NMAP Changelog
v1.0.0 (2011-11-02)

  • First release.
    v1.0.1 (2011-11-25)
  • Minor improvements in HTML code.
    v1.0.2 (2019-01-02)
  • Added licenses information.
    v1.1.0 (2020-10-01)
  • MUpdated CSS and HTML code to match firmware 6.2.0+.
    v5.51.6 (2021-05-25)
  • Updated nmap version to 5.51.6.

Description of router app

ADVANTECH NMAP Router App - symbols 1 Router app NMAP is not contained in the standard router firmware. Uploading of this is described in the Configuration manual (see ChapterRelated Documents).
This module allows user to perform TCP and UDP scan. It can also be used for sending pings (i.e. IP datagrams, which are intended to verify the functionality of a connection between two network interfaces).
NMAP module has a web interface which can be invoked by pressing the module name on the Router Apps page of the router web interface. The left part of the web interface (ie. menu) contains only the Return item, which switches this web interface to the interface of the router. In the right part are displayed the following information:

  • Nmap module is located in /opt/nmap/bin/nmap
  • For help type /opt/nmap/bin/nmap -h

ADVANTECH NMAP Router App - DescriptionThe first line informs about the location of NMAP router app and the second informs about a way to display help for this module. After invoking the help, a list of all parameters which can be used in the context of this module is printed (see the figure on next page). Most of them can be combined.ADVANTECH NMAP Router App - Description 1

Licenses

Summarizes Open-Source Software (OSS) licenses used by this module.ADVANTECH NMAP Router App - Licenses

Related Documents

You can obtain product-related documents on Engineering Portal at icr.advantech.cz address.
To get your router’s Quick Start Guide, User Manual, Configuration Manual, or Firmware go to the Router Models page, find the required model, and switch to the Manuals or Firmware tab, respectively.
The Router Apps installation packages and manuals are available on the Router Apps page.
For the Development Documents, go to the DevZone page.

ADVANTECH logo

Documents / Resources

ADVANTECH NMAP Router App [pdf] User Guide
NMAP Router App, NMAP, Router App, App

References

Leave a comment

Your email address will not be published. Required fields are marked *