ADAM Audio D3V 3 Active Studio Monitors Pair
Specifications
- Power connection: USB-C
- Analog audio connections: Balanced TRS, Unbalanced TS
- Digital audio connection: XLR, TRS, RCA
- Headphone connection: 3.5mm TRS
What’s included
Power Connection
Connect the device to a power source using the provided USB-C cable.
Balanced analog audio connection
Use a TRS cable to connect the device for balanced analog audio transmission. Connect the Tip, Ring, and Sleeve accordingly.
Unbalanced analog audio connections
For unbalanced analog audio connections, use a TS cable. Connect the Tip and Sleeve accordingly. L for left channel, R for right channel.
Balanced Digital Audio Connection
For balanced digital audio connection, use XLR or TRS cables. Ensure proper connections for optimal audio quality.
Headphone Connection
Connect your headphones using a 3.5mm TRS cable for personal listening.
Use of Rotary Front Knob & LED States:
Refer to the provided table for actions associated with pressing the front knob and interpreting LED states to operate the device effectively.
Desktop stand connection & stick-on pads
Attach the device to a desktop stand using the provided accessories or use stick-on pads for stability.
Microphone stand connection
If needed, connect the device to a microphone stand following the recommended setup instructions.
EQ section
Adjust the EQ settings using the provided controls to customize audio output according to your preferences.
For the complete user manual, visit: www.adam-audio.com/d3v/manual
FAQ:
- Q: How do I activate standby mode?
A: Press and hold the front knob for 2 seconds to activate standby mode. To disable standby, press and hold for 8 seconds. - Q: What do different LED states indicate?
A: Refer to the LED state function table for information on different LED states and their meanings.
Documents / Resources
 |
ADAM Audio D3V 3 Active Studio Monitors Pair [pdf] User Guide D3V, D3V 3 Active Studio Monitors Pair, D3V 3, Active Studio Monitors Pair, Monitors Pair, Pair |