FS PCIe 2.0 Ethernet Network Adapter User Guide
Product View
10G Network Adapter
25G/40G Network Adapter
100G Network Adapter
Package Contents
- 1 x low profile bracket
- 1 x full height bracket
- 1 x software CD
Pulling the Network Adapter Module Out
NOTE: Turn off the server and unplug the power cord before pulling the module from the server.
Inserting the Adapter into the Slot
Step 1: Unfold Slot Cover
Step 2: Plug-in Slot Carefully
Step 3: Ensure the Adapter Stable
NOTE: Insert the adapter into the PCIe slot corresponding to the server (eg: PCIe X8).
Connecting the Cable
RJ—45 copper cable
10GBASE-T requires Cat6, Cat6a or Cat7 Cable
Connecting the copper cable
Dual Ports
Fiber Optical Cable
Make sure that the connector is oriented correctly
- Connect the Fiber Cable
- Single Port
- Dual Ports
- Quad Ports
NOTE: The fiber optic port contains a Class 1 laser device. Do not expose the port as this may result in skin or eye injury.
Installing the Windows Driver
First turn on the computer, and when Windows discovers the new adapter, the “Found New Hardware Wizard” appears. Extract the update package from the CD to a specific path. Open a DOS command box and go to a specific path and type setup at the command prompt to extract the driver.
Checking the Status of the Indicator
| Indicator Light | State | Description |
|
LNK (Green/Yellow) |
Green light | Run at maximum port speed |
| Yellow light | Run at a lower port speed | |
| No light | No link | |
| ACT (Green) | Flashing green light | Data activity |
| No light | No link |
Product Warranty
FS ensures our customers that any damage or faulty items due to our workmanship, we will offer a free maintenance service.
Warranty: All Ethernet Network Interface Cards enjoy 3 years limited warranty against defect ) in materials or workmanship. For more details about warranty, please check at https://www.fs.com/policies/warranty.html
Return: If you want to return items, information on how to return can be found at : https://www.fs.com/policies/day_return_policy.html
Compliance Information
FCC
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION
Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the equipment.
Responsible party (only for FCC matter)
FS.COM Inc.
380 Centerpoint Blvd, New Castle, DE 19720, United States
https://www.fs.com
CE
FS.COM GmbH hereby declares that this device is in compliance with the Directive 2014/35/EU. A copy of the EU Declaration of Conformity is available at www.fs.com/company/quality_control.html
Documents / Resources
 |
FS PCIe 2.0 Ethernet Network Adapter [pdf] User Guide Ethernet Network Adapter, PCIe 2.0 Ethernet Network Adapter, PCIe 2.0, PCIe 3.0, PCIe 4.0 |
