soundcore A1xU9Th3p0L Space One Wireless Bluetooth User Guide
At a Glance
- Power Button
- Bluetooth Button
- Volume Down Button
- Play / Pause Button
- Volume Up Button
- Light Show Button
- PartyCast Button
- BassUp Button
- USB-C Charging Port
Installing the Strap
Attach the strap to both sides of the speaker. Adjust the strap length according to the illustration for optimal comfort.
Charging Your Speaker
Use the provided USB-C to USB-C cable to connect the speaker and a certified charger to a power source.
- Please use a charger with a power output of 0.05W to 15W to charge the speaker.
Powering On / Off
- This speaker will power off automatically after 20 minutes if no device is connected.
- You can customize the auto power off time in the soundcore app.
Using Your Speaker
Bluetooth Mode
Press the Bluetooth button to enter Bluetooth pairing mode, then select “soundcore Boom 3i” from the Bluetooth list to connect.
- If the speaker is not connected to a device within 3 minutes after being powered on, it will automatically exit Bluetooth pairing mode.
- To re-enter Bluetooth pairing mode, press the Bluetooth button once.
- This speaker can only play music on one mobile device at a time. If another connected device starts playing music, the speaker will automatically take over and interrupt the current playback without requiring the first device to pause.
- Each time you power on your speaker, it will automatically connect to your last connected device if available within the Bluetooth range. If not, press the Bluetooth button to enter Bluetooth pairing mode.
True Wireless Stereo (TWS) Mode
Two identical soundcore speakers can pair with each other for stereo sound. Both speakers can play the same audio (one as the left channel and the other as the right channel).
With one speaker connected to a smartphone, press and hold the Bluetooth button for 2 seconds on two speakers to enter TWS pairing mode.
PartyCast Mode
With one speaker connected to a smartphone, simultaneously press the PartyCast button on multiple soundcore speakers with PartyCast function to synchronize audio and light.
A prompt sound will play when you enable or disable PartyCast mode, or when multiple speakers are successfully linked together.
- With the PartyCast feature, you can link up to 100 soundcore speakers at the same time.
Light Show
There are 6 dynamic light effects on both sides that move with the rhythm of the music, while 4 additional ambient light effects remain static to enhance the atmosphere. You can switch between different lighting effects to fit your mood or preference.
Emergency Alarm
Press and hold the BassUp button for 5 seconds to activate the Emergency Alarm in case of danger. When the alarm is activated, you can press any button on the speaker once to turn it off.
- The sound of the Emergency Alarm is very loud and piercing. Do not use this feature unless there is an real emergency, as it may disturb others nearby.
soundcore App
Download the soundcore app to enhance your experience.
http://dl-soundcore.soundcore.com/qcdl?flow=soundcore
Product information: Check the product name and software version, or read the user manual.
Firmware update: You will be informed once a new version of firmware is detected when you connect the speaker with the app.
Battery status: Indicates the remaining battery level of your speaker.
Volume control: Adjust the volume level via the app without pressing the buttons on the speaker.
EQ settings: There are various preset EQ settings you can choose from in the app to optimize your experience while enjoying different music genres.
- soundcore Signature: Standard EQ mode optimized for well-balanced sound.
- Treble Boost: High frequencies are enhanced.
- Voice: Voices stand out more clearly from other ambient sounds.
- Balanced: No enhancement for high-frequency and low-frequency sounds.
Buzz Clean: Activate Buzz Clean feature in the app, and the speaker will emit sound waves at specific frequencies to help shake off and clean out sand scattered on the speaker.
Voice Amplifier: Use the app’s Voice Amplifier feature to speak directly through your phone, and your voice will be amplified and played through the speaker.
White Noise: Use the recommended white noise in the app to create a soothing atmosphere for relaxation or falling asleep.
Emergency Alarm: Quickly activates an alarm to draw attention in emergencies. You can also use the app to switch between different alarm sounds and adjust the duration of the alarm.
Set Auto-power off time: The speaker will automatically power off when time is up.
Voice prompt: Mute or restore the voice prompt while powering on/off.
Reset
Press and hold the Bluetooth button and volume up button simultaneously for at least 4 seconds to reset the speaker.
Specifications
Hereby, Anker Innovations Limited declares that this device is in compliance with The Product Security and Telecommunications Infrastructure (Security Requirements for Relevant Connectable Products) Regulations 2023. For the Statement of Compliance, visit the website:
https://uk.soundcore.com/pages/psti-related.
Note: The ‘x’ of SN Code: xxxxxxxxxxxxxxxx is a variable, see below table.
Documents / Resources
 |
soundcore A1xU9Th3p0L Space One Wireless Bluetooth [pdf] User Guide A1xU9Th3p0L, A1xU9Th3p0L Space One Wireless Bluetooth, A1xU9Th3p0L, Space One Wireless Bluetooth, Wireless Bluetooth, Bluetooth |