SEALEY LogoSUPERLINE PRO® MODULAR WORKBENCH WITH STAINLESS
STEEL/WOODEN WORKTOP ADJUSTABLE HEIGHT
MODEL NO’S: APMWB50SS, APMWB50W, APMWB60SS, APMWB60W,
APMWB72SS, APMWB72W

APMWB50SS Superline Pro Modular Workbench

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

SEALEY APMWB50SS Superline Pro Modular Workbench - Refer to instructions Refer to instructions
SEALEY APMWB50SS Superline Pro Modular Workbench - Wear eye protection Wear eye protection

SAFETY

SEALEY APMWB50SS Superline Pro Modular Workbench - Symbol WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this product.
SEALEY APMWB50SS Superline Pro Modular Workbench - Symbol 1 Locate product in a suitable working area.
SEALEY APMWB50SS Superline Pro Modular Workbench - Symbol 1 Keep the work area clean, uncluttered and ensure there is adequate lighting.
SEALEY APMWB50SS Superline Pro Modular Workbench - Symbol WARNING! Use product on level and solid ground, preferably concrete. Avoid tarmacadam since the product may sink into the surface.
SEALEY APMWB50SS Superline Pro Modular Workbench - Symbol 1 Keep the product clean and tidy in accordance with good workshop practice.
SEALEY APMWB50SS Superline Pro Modular Workbench - Symbol 1 Keep children and unauthorised persons away from the working area.
SEALEY APMWB50SS Superline Pro Modular Workbench - Symbol 2 DO NOT use the product for any purpose other than that for which it is designed.
SEALEY APMWB50SS Superline Pro Modular Workbench - Symbol 2 DO NOT exceed maximum capacity of product.
SEALEY APMWB50SS Superline Pro Modular Workbench - Symbol 2 DO NOT undertake work on the product without the work piece being adequately secured. Use clamps or a vice (not included) to secure the work piece. Available from your Sealey stockist.
SEALEY APMWB50SS Superline Pro Modular Workbench - Symbol 2 DO NOT use the product out of doors.
SEALEY APMWB50SS Superline Pro Modular Workbench - Symbol 2 DO NOT get the product wet or use in damp or wet locations or areas where there is condensation.
SEALEY APMWB50SS Superline Pro Modular Workbench - Symbol 2 DO NOT clean the product with any solvents which may damage the paint surface or the protective coating.

INTRODUCTION

Manufactured from heavy gauge powder coated steel and supplied with a 38mm thick stainless steel/wooden worktop. Height adjustable legs allow the user to set to the ideal working height between 760-1064mm. Modular design enable bench to be modified using back panels and drawer units (sold separately) to create a bespoke workstation.

SPECIFICATION

Model no: APMWB50SS APMWB50W APMWB60SS
Nett Weight: 61kg 56kg 70kg
Overall Size (W x D x H): 1263 x 610 x (760-1064mm) 1263 x 610 x (760-1064mm) 1524 x 610 x (760-1064mm)
Model no: APMWB60W APMWB72SS APMWB72W
Nett Weight: 64kg 80.7kg 73.5kg
Overall Size (W x D x H): 1524 x 610 x (760-1064mm) 1829 x 610 x (760-1064mm) 1829 x 610 x (760-1064mm)

CONTENTS

4.1. Refer to attached parts list.

SEALEY APMWB50SS Superline Pro Modular Workbench - parts list

ASSEMBLY

Step 1. Assemble the Support Leg (Upper) 2, and the Front/Rear Support Beam 3 together using supplied hardware.

SEALEY APMWB50SS Superline Pro Modular Workbench - Support LegStep 2. Attach Workbench Top 1 to frame using supplied hardware.SEALEY APMWB50SS Superline Pro Modular Workbench - supplied hardwareStep 3. Attach both Cross Beam (Centre) 5 to Support legs (Upper) 2 using supplied hardware.SEALEY APMWB50SS Superline Pro Modular Workbench - Cross BeamStep 4. Attach all Adjustable Feet (8) to Support legs (2) using supplied hardware.SEALEY APMWB50SS Superline Pro Modular Workbench - Adjustable FeetStep 5. Attach Shelf 6 to Support Legs (Upper) 2 using supplied hardware.SEALEY APMWB50SS Superline Pro Modular Workbench - supplied hardware 1Step 6. Attach Side Panels (7) to Support Legs (2) using supplied hardware.

SEALEY APMWB50SS Superline Pro Modular Workbench - Side Panels

Recycle Icon ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.

SEALEY APMWB50SS Superline Pro Modular Workbench - QR Codehttps://qrco.de/bcy2E9
REGISTER YOUR PURCHASE HERE

NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No Liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 60 months from purchase date, proof of which is required for any claim.

Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
SEALEY APMWB50SS Superline Pro Modular Workbench - Symbol 3 01284 757500
SEALEY APMWB50SS Superline Pro Modular Workbench - Symbol 4 sales@sealey.co.uk
SEALEY APMWB50SS Superline Pro Modular Workbench - Symbol 5 www.sealey.co.uk

SEALEY Logo© Jack Sealey Limited
APMWB50SS, APMWB50W, APMWB60SS, APMWB60W APMWB72SS, APMWB72W, Issue 1 04/03/25

Documents / Resources

SEALEY APMWB50SS Superline Pro Modular Workbench [pdf] Instruction Manual
APMWB50SS, APMWB50W, APMWB60SS, APMWB60W, APMWB72SS, APMWB72W, APMWB50SS Superline Pro Modular Workbench, APMWB50SS, Superline Pro Modular Workbench, Pro Modular Workbench, Modular Workbench

References

Leave a comment

Your email address will not be published. Required fields are marked *