SEALEY APMRM1 Modular Racking Mid Unit 6 Drawer 580mm

Specifications

• Model No: APMRM1
• Nett Weight: 19.95kg
• Size (W x D x H): 580 x 340 x 444mm
• Drawers: 6

MODEL NO: APMRM1

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions and properly maintained, give you years of trouble-free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

Safety

WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this product.

• Locate product in a suitable working area.
• Keep the work area clean, uncluttered and ensure there is adequate lighting.
• WARNING! Use product on level and solid ground, preferably concrete. Avoid tarmacadam since the product may sink into the surface.
• Keep the product clean and tidy in accordance with good workshop practice.
• Keep children and unauthorised persons away from the working area.
• DO NOT use the product for any purpose other than that for which it is designed.
• DO NOT exceed maximum capacity of product.
• DO NOT undertake work on the product without the work piece being adequately secured. Use clamps or a vice (not included) to secure the work piece. Available from your Sealey stockist.
• DO NOT use the product out of doors.
• DO NOT get the product wet or use in damp or wet locations or areas where there is condensation.
• DO NOT clean the product with any solvents which may damage the paint surface or the protective coating.

Introduction

The Sealey modular racking system is finished with a heavy-duty textured powder coat to prevent against rusting. Simply choose your base, middle and top units and push together using nylon connectors to create versatile storage for the workshop, garage, home or office. All drawers have ball-bearing drawer slides for smooth operation and cupboard doors are fitted with spring loaded hinges allowing them to be fitted the side that suits your environment. Buy individually (see specific model number for full specs) or as one of our pre-created combo’s.

CONTENT

• Step 1. Insert the plastic end plugs into the uprights.
• Step 2. For drawer removal refer to the diagram releasing levers one up, one down on the slides either side of the cabinet as shown.
• Step 3. Remove the top drawers to reveal hole in the back plate.
• Step 4. Fix the cabinet to a solid wall, mark the wall using the hole in step 3 at the back of cabinet, drill a hole using the dimensions in the above illustration, insert a wall plug 8*40 in the hole.
• Step 5. Fix the cabinet to the wall using the self-tapping screw ST4.8*30.
• Step 6. To fix the cabinet on to a wooden wall. Mark the wall then drill the hole using the above diagram dimensions.
• Step 7. Use self-tapping screw ST4.8*30. No wall plug is required for a wooden wall.
• Step 8. Assembly completed.

ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.

NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.

IMPORTANT: No Liability is accepted for incorrect use of this product.

WARRANTY: Guarantee is 12 months from purchase date, proof of which is required for any claim.

SCAN THE QR CODE

CONTACT

• Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
• 01284 757500
• sales@sealey.co.uk
• www.sealey.co.uk

FAQ

Q: Can this product be used outdoors?
A: No, it is recommended not to use this product outdoors.

Q: How many drawers does this unit have?
A: This unit has 6 drawers.

Documents / Resources

SEALEY APMRM1 Modular Racking Mid Unit 6 Drawer 580mm [pdf] Instruction Manual APMRM1 Modular Racking Mid Unit 6 Drawer 580mm, APMRM1, Modular Racking Mid Unit 6 Drawer 580mm, Mid Unit 6 Drawer 580mm, 6 Drawer 580mm, Drawer 580mm

References

• User Manual