EPOS IMPACT SC 75 USB MS Dual-Sided Headset Quick Start Guide

EPOS IMPACT SC 75 USB MS Dual-Sided Headset

Introduction

The multipurpose EPOS IMPACT SC 75 USB MS Dual-Sided Headset is made to improve communication in any setting. It is compatible with both analog and digital devices thanks to its two connecting choices (3.5mm jack and USB), providing customers who alternate between PCs, laptops, and mobile devices more flexibility. For easy control over calls, volume, and microphone muting, the headset has an integrated call control unit. Easy-to-replace ear pads provide longevity and hygiene, and customizable features allow for a personalized fit. Its design prioritizes user comfort. The durable design and high sound quality of the EPOS IMPACT SC 75 make it a dependable audio solution for gaming, office use, and remote work.

Package Contents

The package contents are:

1. Headset with integrated call control unit
2. USB Cable
3. Carry Pouch
4. Safety Guide
5. Quick Guide

Connection Possibilities

There are two connection possibilities for the EPOS IMPACT SC 75 USB MS Dual-Sided Headset:

• A. Direct 3.5mm Connection
• • The headset is connected directly to the 3.5mm audio jack of a mobile phone or device.
• B. USB Connection
• • The headset is connected to a computer or laptop through a USB-A connector. This connection utilizes an integrated call control unit that is part of the headset’s cable, offering functions such as volume control, mute, and call management.

For product specific software and firmware upgrade with EPOS Connect go to: eposaudio.com/connect

Wearing the headset

• Height Adjustment:
• • Adjust the height of the headset by sliding the headband up or down (indicated by the vertical blue arrows) to ensure a comfortable fit.
• Microphone Positioning:
• • Bend the microphone boom gently to position the microphone close to the mouth for optimal voice pick-up (indicated by the horizontal blue arrows).
• Boom Arm Adjustment:
• • The boom arm can be rotated for use on the left or right side. Rotate the boom arm until it clicks into the desired position (indicated by the curved blue arrow).
• Left and Right Identification:
• • Ensure the headset is worn with the correct orientation, with the microphone boom on the left or right as preferred (indicated by the ‘Left’ and ‘Right’ labels at the bottom).

These instructions are designed to help users achieve the best fit and performance from their headset.

Adjusting the volume

• To increase the volume, press the “+” button.
• To decrease the volume, press the “-” button.

Muting the microphone

To mute the microphone, press the microphone button. It usually has an icon resembling a microphone with a line through it. Press again to unmute.

To accept/end a call

To accept a call or end an ongoing call, press the button with the telephone icon.

Redialing

To redial the last number, press and hold the telephone button for 2 seconds.

Transporting the headset

Replacing the ear pad

Removing the Old Ear Pad:

• Gently twist the ear pad counter-clockwise (as indicated by the curved arrow) to detach it from the headset’s earpiece.

Attaching the New Ear Pad:

• Align the new ear pad with the earpiece and twist it clockwise (as shown by the curved arrow) until it locks into place.

Frequently Asked Questions

Download The PDF link: EPOS IMPACT SC 75 USB MS Dual-Sided Headset Quick Start Guide