InstaShow VS Assist App
Installation Guide
Installing (initial setup)
Use the [room camera]
Step 1
Connect to a [room camera]
Step 2
Connect to a corporate network
Step 3
Plug in an InstaShow Button
*Your PC will automatically switch the Wi-Fi connection to the VS20 receiver
Step 4
Run the InstaShow VS Assist App
*Click the InstaShow Camera Preview to check if the [room camera] is being used
Step 1
Connect to a [room camera]Step 2
Connect to a corporate network*All devices must be connected to the same LAN
Step 3
Run the InstaShow VS Assist App
Step 4
Select the VS20 Host Receiver
Installing
Use the [room camera] in a [VC meeting]
Step 1
Open your [VC APP]
Step 2
Set the camera to InstaShow Camera
You are now using the [room camera]
Audio Setting in [VC APP]
There are 2 options to set up your microphone:
InstaShow button microphone:
App Free
A standalone mic to replace the computer’s built-in mic.
InstaShow Audio:
App Required
The mic system that turn on all the microphones
InstaShow VS Assist App
InstaShow Camera Preview
Click the button to check if the correct camera is being used
InstaShow Display Sharing
Click the button to capture what the presenter is casting on the local screen
You are logged in to [VC APP]
Step 1
Use Win + P keyboard shortcut to extend your screen to external displays and projectors
Step 2
Click “InstaShow Display Sharing” in VS Assist App 
Step 3
Share InstaShow Display in [VC APP] for remote attendees
You are not logged in to [VC APP]
Press the InstaShow Button to cast your screen 
Documents / Resources
 |
BenQ InstaShow VS Assist App [pdf] Installation Guide VS20_332131, InstaShow VS Assist App, InstaShow VS Assist, App |