ANDROID DISPLAY INSTALLATION FOR CONCERT SYMPHONY
A: POWER CABLE CONNECTION
B: CENTER SPEAKER CONNECTION
(Center Speaker Optional) 
C: A/C CONNECTOR CANBUS CONNECTION 
D: FRAME INSTALLATION
E: ANDRIOD MEDIA SOUND
verbinden Sie den AUX Stecker mit Ihrem AUX IN Anschluss oder AUX Stecker mit AMI Adapter und mit dem Auto AMI Anschluss Connect the 3.5mm Aux Output to your car Aux port or to the AMI Adaptor and then to Car AMI Port which is placed in the Hand Glove Compartment 
In Original Radio Menu Media -> Quelle wählen Sie AUX oder AMI Quelle aus
In Original Radio Menu, Media ->Source select Aux or AMI
In the original menu pay attention to which point your sound source is (in the example above left Aux=3, right AMI=1, depending on what you use (Aux or AMI) remember it.
F: AUX POSITION
Press Auto Setup as shown in the picture above. In the menu press and hold “Function selection” for 10 seconds (keep pressed, do not open!) it switches as in the picture below still a menu “Parameter Configuration of Original Car” on the menu press it. 
Select the corresponding number in the AUX Number of rows in the media Source: In the example above, AUX will be 3 and for AMI it will be 1 
Einstellungen / Settings
Tap on SETUP in Main Menu
2) Kamera Einstellungen / Camera Settings 
Select Camera in Setup Menu, here you can set
- Original or Retrofit Backup Camera
- Rear Camera Parking Lines
- Backup Cam Picture Mirroring
- Rear Camera type
- Camera Switch Time lapse
Select General in Setup Menu, select navigation app settings and select your favorite app for navigation that you want to use
General Settings
Select System in Setup Menu and then Android settings > here you can change settings like language, Time & Date, Network and much more
By default, the system is set up to have a data connection and receives the time from the network If you use the system without an Internet connection, it is advisable to change the time and date settings, otherwise the time will be reset each time the device is restarted Select System in Setup Menu then choose Android settings
2) CONNECT YOUR SMARTPHONE VIA USB
3) CARPLAY / ANDROIDAUTO WILL START AUTOMATICLY
Wireless Carplay for IOS
- Open ZLINK APP
- Turn On Phone Wifi
- Turn On phone Bluetooth and connect with Android Display
- Please be Sure that you are NOT connected with Factory System
ACHTUNG
WIRELESS ANDROID AUTO IST ERST AB ANDROID 11
Documents / Resources
 |
AUDIO A4 8K B8 Touchscreen Android Radio Navigation Carplay [pdf] Instruction Manual A4 8K B8 Touchscreen Android Radio Navigation Carplay, A4 8K B8, Touchscreen Android Radio Navigation Carplay, Android Radio Navigation Carplay, Radio Navigation Carplay, Navigation Carplay, Carplay |