User Manual
Structural Sketch
Operational Instruction:
Tips Before Using:
Remove the earphone charging insulation sheet from the charging box, and then put the earphones back into the charging box and close it for charging.
Bluetooth pairing:
- Turn off Bluetooth on cellphone firstly.
- Open the charging box and you’ll see LED light on two earphones is flashing.
- Turn on Bluetooth on cellphone to search for “T Elf 2” and dick it to Connect.
Music control:
One dick touch button to control pause/play of music.
Double-dick the right earphone touch button to increase the volume, and three times click to switch to the next song.
Double-click the left earphone touch button to decrease the volume, and three times dick to switch to the previous song.
Call control:
One dick touch button to answer/ hangup the call, long press two seconds to reject the call.
Last redial:
Continuously dick four touch buttons and redial a call.
Voice assistant:
Press the touch button for a second and let go when you hear the prompt.
Face recognition:
When playing the music, remove earphones, then music will automatically stop playing. Put the earphones back on and the music will resume.
Solutions for the earphones’ malfunction:
Notice: Hearing sound in only one earphone or the other one cannot be connected, please do the following operations on both earphones.
- Turn off Bluetooth on cellphone.
- Long press touch button to turn on the left and right earphone separately, and then three times dick on both left earphone and right earphone so two earphones automatically shut down and pairing recording be removed.
3.Put two earphones back into the charging box and close cover. - Reopen the charging box and wait for LED light on two earphone to flash.
- The earphone restart and open Bluetooth on cellphone for pairing
Charging instructions:
Earphones Charging:
Put the earphones into the charging box and close cover. Blue light shows on charging case and it is always on when charging the case. LED light is off when fully charged.
Box Charging:
Green light shows on charging case and it is always on when charging the case. LED light is off when fully charged.
Charging Box Red Light Flashing:
Indicating low power, need to be charged.
Technical specifications Bluetooth version: 5.0
Frequency range: 2.4GHz-2.48GHz
Supporting protocols: A2DP, AVRCP, HSP, HFP
Frequency response range: 20Hz-20KHz
Standby time: about 1000 hours
Music / talk time: about 5-6 hours
Charging time: about 1 hour for headphones,about 2 hours for charging box
Input voltage / current: 5V/> 100mA
Output power: 7mW+7mW
Contact us
www.bluedio.com
aftersales@bluedio.com
020-36450093
Questions about your Manual ? Post in the comments!
References
- User Manualmanual.tools
Good Morning! I’m wanting to listen to fm radio because I can’t turn on the radio on bluedio tel 2
Bom dia! Estou querendo ouvir rádio fm, pois não consigo ligar o rádio no bluedio telf 2
Bom dia! Estou querendo ouvir rádio fm, pois não consigo ligar o rádio no bluedio telf 2
How do I turn on the FM radio on my Bluedio T-Elf 2 earbuds?
Based on the official user manual for the Bluedio T-Elf 2, these earbuds do not have a built-in FM radio tuner. The device is designed to play audio via Bluetooth from a connected smartphone, tablet, or computer.
To listen to FM radio using your Bluedio T-Elf 2, you will need to:
Please note that many smartphones require wired headphones to act as an antenna for their internal FM chips; if your phone requires this, you may need to use a third-party internet radio app instead.
Read the full Q&A page
How do I know the two phones are charged equal? I bought it today and it says this 100% but one is unloaded, can I carry the box with the headphones inside the box?
Como eu sei que os dois fone estão carregados iguais ? Comprei hj e diz esta 100% porem um esta descarregado , eu posso carregar a caixa com os fones dentro da caixa ?
Como eu sei que os dois fone estão carregados iguais ? Comprei hj e diz esta 100% porem um esta descarregado , eu posso carregar a caixa com os fones dentro da caixa ?
How do I know if both earbuds are fully charged, and can I charge the case with the earbuds inside?
Yes, you can and should charge the charging box with the earphones inside. According to the manual, the earphones charge whenever they are placed inside the box and the cover is closed.
To ensure both earbuds are charging correctly, please check the following:
If one earbud remains uncharged or disconnected, the manual suggests a reset: Turn off your phone's Bluetooth, long-press the touch buttons on both earphones to turn them on, then click each earphone three times to clear pairing records. Place them back in the box, close the lid, and then try pairing again.
Read the full Q&A page
I bought a t elf2 phone and it arrived on October 3rd, 2021, I only used it 4 times, I was using it and just the left side stopped, I put it in the case and the light doesn’t turn on, and it doesn’t have any month of use.
Comprei um fone t elf2 e chegou no dia 3 de outubro de 2021 ,usei apenas 4 vezes ,hj estava usando e simplesmente o lado esquerdo parou coloquei no case e a luz não liga ,e não tem nenhum mês de uso
Comprei um fone t elf2 e chegou no dia 3 de outubro de 2021 ,usei apenas 4 vezes ,hj estava usando e simplesmente o lado esquerdo parou coloquei no case e a luz não liga ,e não tem nenhum mês de uso
Why is my left earbud not working or charging even though it is new?
It is common for one earbud to lose connection or fail to charge due to a pairing error or a connection issue with the charging pins. Please try the following troubleshooting steps provided in the Bluedio T-Elf 2 manual:
If the light still does not turn on when placed in the case after cleaning, the unit may be defective. You can contact Bluedio support at aftersales@bluedio.com.
Read the full Q&A page