BenQ DV01K Camera Mount

Specifications
| Item | Quantity |
|---|---|
| Camera mount upper bracket | 1 |
| Camera mount lower bracket | 1 |
| USB-C (Female) to USB-A (Male) cable (1.8 m) | 1 |
| M3 screws (6 mm) | 5 |
| Cable saddles | 2 |
| Assembly instructions | 1 |
- M3 screw size used for mounting: 6 mm
Quick Guide
- Select the installation method based on your board model (Method 1: RE04, Method 2: RE04A/RE6505A/RE7505A, Method 3: RP05/RM05/RE05/RE8605A/RE05E/NE001A/RE04N).
- Secure the mount to the board frame using the specified number of M3 (6 mm) screws for the chosen method.
- Secure the DV01K camera to the mount using the specified number of M3 (6 mm) screws.
- Connect the DV01K to the board using the provided cable: connect the female USB-C end of the cable to the DV01K.
- Optional tip: for added security, use the M3 (6 mm) hex socket screws × 2 included with the DV01K camera.

Package contents
- Camera mount upper bracket x 1 (For RP05/RM05/RE05/RE05A/RE05E/ NE001A/RE04A/RE04N models)
- Camera mount lower bracket x 1 (For RE04 models)
- USB-C (Female) to USB-A (Male) cable (1.8 m) x 1

- M3 screws (6 mm) x 5
- Cable saddles x 2
- Assembly instructions x 1

Method l: RE04 installation
- Use M3 (6 mm) screws x 2 to secure the upper and lower bracket mounts.

- Use M3 (6 mm) screw x 1 to secure the mount to the upper back side of the board’s frame.

- Use M3 (6 mm) screws x 2 to secure the camera to the mount.
Tip: Use the M3 (6 mm) hex socket screws x 2 included with the DV01 K camera for added security. - Use the female USB-C end of the provided cable to connect the DV01 K to the board.

Method 2: RE04A/RE6505A/RE7505A installation
- Use M3 (6 mm) screw x 1 to secure the mount to the upper back side of the board’s frame.

- Use M3 (6 mm) screws x 2 to secure the camera to the mount. Tip: Use the M3 (6 mm) hex socket screws x 2 included with the DV01 K camera for added security.

- Use the female USB-C end of the provided cable to connect the DV01 K to the board.

Method 3: RP05/RM05/RE05/RE8605A/RE05E/NE001A/RE04N installation
- Use M3 (6 mm) screws x 2 to secure the mount to the upper back side of the board’s frame

- Use M3 (6 mm) screws x 2 to secure the camera to the mount. Tip: Use the M3 (6 mm) hex socket screws x 2 included with the DV01 K camera for added security.

- Use the female USB-C end of the provided cable to connect the DV01 K to the board.

Troubleshooting
- Camera placement appears off-center (RE05E/NE001A and RE05A): the manual notes that for these model variants, the camera will be positioned off-center when installed via Method 3 or Method 2 as applicable.
Documents / Resources
![]() | DV01K Camera Mount |
References
- User Manualmanual.tools
Published: November 11, 2026
Updated: November 12, 2026

