Product Overview and Package Contents
The AcclaFit D2 is a round-dial smartwatch featuring a 1.38-inch touchscreen display, aluminum alloy casing, optical health sensors, integrated speaker and microphone for Bluetooth calling, and a removable 22 mm silicone wrist strap.
-
AcclaFit D2 Smartwatch
-
Magnetic USB Charging Cable
-
Silicone Watch Strap (22 mm)
-
User Documentation
Charging and Power Management
Fully charge the smartwatch prior to initial setup. Use only the provided magnetic charging cable with a standard 5V USB power adapter or computer USB port.
-
Align the magnetic charging pins on the cable with the contact points located on the rear casing of the watch.
-
Plug the USB connector into a powered USB port or power adapter.
-
Observe the display to confirm the charging screen and battery indicator appear.
-
Allow approximately 2 hours for a complete recharge. Disconnect the cable once fully charged.
Typical battery runtime ranges between 7 to 15 days depending on usage intensity, display brightness, and call frequency.
Companion App Setup and Bluetooth Pairing
The smartwatch requires the Da Fit companion application for configuration, time synchronization, data logging, and alert management. Compatible mobile operating systems include Android 5.0/6.0+ and iOS 9.0/10.0+.
-
Download and install the Da Fit application from the Google Play Store (Android) or Apple App Store (iOS).
-
Ensure Bluetooth is enabled on your mobile phone.
-
Turn on the smartwatch by holding the physical side button for 5 to 10 seconds.
-
Open the Da Fit app, configure your user profile, and grant requested Bluetooth and notification permissions.
-
Go to the Device section within Da Fit and select Add Device.
-
Select D2 from the list of detected devices to pair.
-
Confirm pairing prompts on both your phone and the smartwatch screen to complete synchronization.
Operating Controls and Navigation
The watch combines capacitive touch gestures across the 1.38-inch screen with a physical side button for operation.
-
Press and hold side button: Power on the watch (5-10 seconds) or access power-off prompts.
-
Short press side button: Return to the home watch face or open the application list.
-
Swipe Down: Access quick settings and device status.
-
Swipe Up: View received app notifications and text alerts.
-
Swipe Left / Right: Cycle through activity widgets, health monitoring cards, and weather forecasts.
-
Touch / Tap: Select a menu item, confirm actions, or wake the display.
Bluetooth Calls and Smart Notifications
With an active Bluetooth connection to your smartphone, the AcclaFit D2 supports wrist-based telephone conversations and message notifications via its built-in microphone and speaker.
-
Making and Answering Calls: Dial numbers directly from the watch dial pad or tap the accept button when an incoming call appears.
-
App Notifications: Real-time alerts from WhatsApp, Facebook, Instagram, and SMS display on the watch screen when notification permissions are enabled in Da Fit.
-
Music Control: Control audio playback on your phone, including play, pause, skip tracks, and volume adjustment.
-
Weather Display: View local weather forecasts synchronized from your mobile device.
Health and Fitness Tracking
The watch features continuous 24/7 biometric tracking and extensive multi-sport tracking capabilities. Note: Biometric measurements are intended for fitness reference only and must not be used for medical diagnostic purposes.
-
Heart Rate Tracking: Continuous 24/7 pulse measurement with configurable high and low heart rate threshold alerts.
-
Blood Oxygen (SpO2) and Blood Pressure: On-demand and automated cardiovascular trend estimates viewable on screen and in the Da Fit app.
-
Sleep Monitoring: Analyzes sleep structure across deep sleep, light sleep, REM, and awake intervals.
-
Activity and Sports Tracking: Records steps, active minutes, and calories across over 100 to 147 workout modes (e.g., walking, running, cycling, yoga).
-
Connected GPS: Uses the paired smartphone's GPS module via the Da Fit app to log outdoor route maps and distance.
Care, Maintenance, and Strap Replacement
Proper maintenance ensures skin comfort, prevents sensor inaccuracies, and extends the operational lifespan of your device.
-
Clean the watch body and rear sensor window regularly with a soft, lint-free cloth.
-
Wipe away sweat, dirt, or moisture after workouts before charging the device.
-
To detach the strap, slide the quick-release spring pin inward on the underside of the 22 mm band.
-
Pull the strap away from the watch casing lugs.
-
Insert one pin tip of the new strap into the lug hole, pull the release pin lever inward, align with the opposite hole, and release the lever to lock securely.
Water Resistance Guidelines: The watch is rated IP68 (resistant to dust, sweat, splashes, and immersion up to 1 meter). It is not suitable for hot water baths, saunas, steam exposure, scuba diving, or high-velocity water sports.
Troubleshooting
|
Issue |
Possible Cause |
Corrective Action |
|---|---|---|
|
Watch will not turn on |
Depleted battery or insufficient button press |
Connect to charger for at least 30 minutes. Press and hold side button for 5 to 10 seconds. |
|
Cannot pair with phone |
Bluetooth turned off, out of range, or cache issue |
Ensure Bluetooth is active. Keep devices within 10 meters. Restart phone and watch. Pair strictly inside the Da Fit app. |
|
Inaccurate sensor readings |
Loose fit or dirty optical sensor |
Wear watch snugly one finger's width above wrist bone. Clean rear optical glass with a dry cloth. |
|
Notifications not arriving |
Missing app permissions or background restriction |
Enable notification and background execution permissions for Da Fit in smartphone system settings. |
Product Specifications
|
Parameter |
Specification |
|---|---|
|
Model |
AcclaFit D2 |
|
Display |
1.38-inch Full Touch Screen |
|
Resolution |
320 x 320 pixels |
|
Case Material |
Aluminium Alloy |
|
Strap Width |
22 mm Silicone (Quick-release) |
|
Battery Capacity |
400 mAh |
|
Typical Battery Life |
7 to 15 days (Usage dependent) |
|
Charging Time |
Approximately 2 hours |
|
Ingress Protection |
IP68 (Up to 1 meter depth) |
|
Wireless Connectivity |
Bluetooth |
|
Sensors |
Optical Heart Rate, SpO2, Accelerometer |
|
Compatibility |
Android 5.0+ / iOS 9.0+ smartphones |
Online research sources
Google Search helped find documentation for this product.
View sources used (5)
References
- User Manualmanual.tools