AcclaFit D2 Smartwatch User Manual

Product Overview and Package Contents

The AcclaFit D2 is a round-dial smartwatch featuring a 1.38-inch touchscreen display, aluminum alloy casing, optical health sensors, integrated speaker and microphone for Bluetooth calling, and a removable 22 mm silicone wrist strap.

AcclaFit D2 smartwatch in black finish featuring a round touchscreen display and side control button.
AcclaFit D2 smartwatch in black finish featuring a round touchscreen display and side control button.
  • AcclaFit D2 Smartwatch

  • Magnetic USB Charging Cable

  • Silicone Watch Strap (22 mm)

  • User Documentation

Charging and Power Management

Fully charge the smartwatch prior to initial setup. Use only the provided magnetic charging cable with a standard 5V USB power adapter or computer USB port.

  1. Align the magnetic charging pins on the cable with the contact points located on the rear casing of the watch.

  2. Plug the USB connector into a powered USB port or power adapter.

  3. Observe the display to confirm the charging screen and battery indicator appear.

  4. Allow approximately 2 hours for a complete recharge. Disconnect the cable once fully charged.

AcclaFit D2 display presenting the charging status indicator and battery progress.
AcclaFit D2 display presenting the charging status indicator and battery progress.

Typical battery runtime ranges between 7 to 15 days depending on usage intensity, display brightness, and call frequency.

Companion App Setup and Bluetooth Pairing

The smartwatch requires the Da Fit companion application for configuration, time synchronization, data logging, and alert management. Compatible mobile operating systems include Android 5.0/6.0+ and iOS 9.0/10.0+.

  1. Download and install the Da Fit application from the Google Play Store (Android) or Apple App Store (iOS).

  2. Ensure Bluetooth is enabled on your mobile phone.

  3. Turn on the smartwatch by holding the physical side button for 5 to 10 seconds.

  4. Open the Da Fit app, configure your user profile, and grant requested Bluetooth and notification permissions.

  5. Go to the Device section within Da Fit and select Add Device.

  6. Select D2 from the list of detected devices to pair.

  7. Confirm pairing prompts on both your phone and the smartwatch screen to complete synchronization.

Operating Controls and Navigation

The watch combines capacitive touch gestures across the 1.38-inch screen with a physical side button for operation.

  • Press and hold side button: Power on the watch (5-10 seconds) or access power-off prompts.

  • Short press side button: Return to the home watch face or open the application list.

  • Swipe Down: Access quick settings and device status.

  • Swipe Up: View received app notifications and text alerts.

  • Swipe Left / Right: Cycle through activity widgets, health monitoring cards, and weather forecasts.

  • Touch / Tap: Select a menu item, confirm actions, or wake the display.

Bluetooth Calls and Smart Notifications

With an active Bluetooth connection to your smartphone, the AcclaFit D2 supports wrist-based telephone conversations and message notifications via its built-in microphone and speaker.

AcclaFit D2 wrist interface showing an incoming Bluetooth call notification with answer and reject options.
AcclaFit D2 wrist interface showing an incoming Bluetooth call notification with answer and reject options.
  • Making and Answering Calls: Dial numbers directly from the watch dial pad or tap the accept button when an incoming call appears.

  • App Notifications: Real-time alerts from WhatsApp, Facebook, Instagram, and SMS display on the watch screen when notification permissions are enabled in Da Fit.

  • Music Control: Control audio playback on your phone, including play, pause, skip tracks, and volume adjustment.

  • Weather Display: View local weather forecasts synchronized from your mobile device.

Health and Fitness Tracking

The watch features continuous 24/7 biometric tracking and extensive multi-sport tracking capabilities. Note: Biometric measurements are intended for fitness reference only and must not be used for medical diagnostic purposes.

Fitness tracking interface demonstrating heart rate, blood oxygen, step counting, and sports metrics.
Fitness tracking interface demonstrating heart rate, blood oxygen, step counting, and sports metrics.
  • Heart Rate Tracking: Continuous 24/7 pulse measurement with configurable high and low heart rate threshold alerts.

  • Blood Oxygen (SpO2) and Blood Pressure: On-demand and automated cardiovascular trend estimates viewable on screen and in the Da Fit app.

  • Sleep Monitoring: Analyzes sleep structure across deep sleep, light sleep, REM, and awake intervals.

  • Activity and Sports Tracking: Records steps, active minutes, and calories across over 100 to 147 workout modes (e.g., walking, running, cycling, yoga).

  • Connected GPS: Uses the paired smartphone's GPS module via the Da Fit app to log outdoor route maps and distance.

Care, Maintenance, and Strap Replacement

Proper maintenance ensures skin comfort, prevents sensor inaccuracies, and extends the operational lifespan of your device.

  1. Clean the watch body and rear sensor window regularly with a soft, lint-free cloth.

  2. Wipe away sweat, dirt, or moisture after workouts before charging the device.

  3. To detach the strap, slide the quick-release spring pin inward on the underside of the 22 mm band.

  4. Pull the strap away from the watch casing lugs.

  5. Insert one pin tip of the new strap into the lug hole, pull the release pin lever inward, align with the opposite hole, and release the lever to lock securely.

Water Resistance Guidelines: The watch is rated IP68 (resistant to dust, sweat, splashes, and immersion up to 1 meter). It is not suitable for hot water baths, saunas, steam exposure, scuba diving, or high-velocity water sports.

Troubleshooting

Issue

Possible Cause

Corrective Action

Watch will not turn on

Depleted battery or insufficient button press

Connect to charger for at least 30 minutes. Press and hold side button for 5 to 10 seconds.

Cannot pair with phone

Bluetooth turned off, out of range, or cache issue

Ensure Bluetooth is active. Keep devices within 10 meters. Restart phone and watch. Pair strictly inside the Da Fit app.

Inaccurate sensor readings

Loose fit or dirty optical sensor

Wear watch snugly one finger's width above wrist bone. Clean rear optical glass with a dry cloth.

Notifications not arriving

Missing app permissions or background restriction

Enable notification and background execution permissions for Da Fit in smartphone system settings.

Product Specifications

Parameter

Specification

Model

AcclaFit D2

Display

1.38-inch Full Touch Screen

Resolution

320 x 320 pixels

Case Material

Aluminium Alloy

Strap Width

22 mm Silicone (Quick-release)

Battery Capacity

400 mAh

Typical Battery Life

7 to 15 days (Usage dependent)

Charging Time

Approximately 2 hours

Ingress Protection

IP68 (Up to 1 meter depth)

Wireless Connectivity

Bluetooth

Sensors

Optical Heart Rate, SpO2, Accelerometer

Compatibility

Android 5.0+ / iOS 9.0+ smartphones

Online research sources

Google Search helped find documentation for this product.

View sources used (5)

References