icseecam EseeCloud App User Guide

icseecam EseeCloud App

Overview

• EseeCloud is managed through the EseeCloud mobile app. The manual covers app download/registration, pre-use setup, and adding WiFi or 4G cameras to the app, including fallback methods such as QR scan and manual add.

Specifications

Quick Setup & Use

• Download and install the EseeCloud app by scanning the QR code, then follow the app prompts to complete user registration.
• Pre-use settings: If the product has batteries, set the power switch to ON. If it has no batteries, connect the camera to the provided power adapter or another power source.
• Internet placement (WiFi camera): When connecting to the Internet, place the WiFi camera within 2 meters of the router.
• Connect phone WiFi: Connect your phone to WiFi and make sure you know the exact WiFi password.
• Add device in the app:
  • WiFi Camera: Connect power → log in to Eseecloud → turn on phone Bluetooth → tap + → select the device and tap Add → follow on-screen guidance.
  • If the device isn’t found after 10 seconds on the Bluetooth search screen, tap Scan to add and scan the QR code on the device body.
  • 4G Camera: Connect power → (auto search) tap Scan to add → scan the QR code on the device body → follow on-screen guidance.
  • For 4G, insert a data-enabled SIM card first, then power on the camera to complete connection.
• Fallback add methods (if QR code not found): Use Manual Add to enter the device ID (per manual text). For router WiFi devices, use camera scan code add or camera hotspot add (per on-screen guidance).
• If the camera installation location has no Internet: In the WiFi selection interface, use the WiFi Connection button (upper right) and switch to Direct Connection in the pop-up window.

APP Download and Installation

1. Use your mobile phone to scan the QR code below to download and install “EseeCloud”, and follow the APP prompts to complete user registration

Pre-use settings

1. For products with batteries, please turn the power switch to “ON” mode. For products without batteries, please connect the camera to the power adapter provided with the product, or connect the camera to a power source.
2. Please place the wifi camera within 2 meters of the router when connecting to the Internet.
3. Connect the phone to the WiFi and make sure you know the exact WiFi password

Add device

WIFl Camera

• Step 1:Please connect the device to the power supply to ensure that the device is powered on normally;
• Step 2: Log in to the “Eseecloud” APP, turn on the Bluetooth function of the mobile phone, and click the “+” add button on the interface to enter the automatic device search interface:
• Step 3: Select the device you need to add, click the “Add” button on the right, and follow the interface guidance to add the device;

Note: lf you do not find the device you want to add after waiting 10 seconds on the Bluetooth search interface, please click”Scan to add” below to scan the QR code on the device body to add the device.

4G Camera

• Step 1:Please connect the device to the power supply to ensure that the device is powered on normally;
• Step 2: On the automatic search interface, click ‘Scan to add” to enter the scan code interface;
• Step 3: Scan the QR code on the device body, and add the device according to the interface guidance.

Note: The 4G camera can only connect after inserting a SIM card. Please insert a data-enabled SIM card first, then turn on the camera or connect it to a power source to complete the connection.

Note

1. If you cannot find the QR code on the device body, please choose other adding methods according to the device type:
   1. Insert the SIM card or connect the network cable to use the device, please click “Manual Add ” and enter the device ID to add the device;
   2. For the device used to connect to the router WiFi. please click”Camera scan code to add” or “Camera hotspot add” to add the device according to the interface guidance;
2. If the location where you install the camera cannot be connected to the Internet, please click the “WiFi Connection” button in the upper right corner of the WiFi selection interface, and switch to “Direct Connection” in the pop-up window.

FCC Statement

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and may radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and back on, the user is encouraged to attempt to correct the interference by one or more of the following measures.

• Reorienting or repositioning the receiving antenna.
• Increasing the distance between the equipment and the receiver.
• Connecting the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Important: Changes or modifications not expressly approved by the manufacturer responsible for compliance may cause the user to lose operation. or modifications not expressly approved by the manufacturer responsible for compliance could cause the user to lose the right to operate the equipment.

Troubleshooting

• Device not found during Bluetooth search (WiFi camera): After waiting 10 seconds on the Bluetooth search interface, use Scan to add to scan the QR code on the device body.
• Cannot find the QR code on the device body: The manual suggests choosing other adding methods based on device type. For example, use Manual Add and enter the device ID, or use camera scan code/camera hotspot add for router WiFi setup (per on-screen guidance).
• Installation location cannot connect to the Internet: On the WiFi selection interface, tap WiFi Connection (top right) and switch to Direct Connection in the pop-up window.
• 4G camera cannot connect: The manual states the 4G camera can only connect after inserting a SIM card (insert a data-enabled SIM card, then power on the camera or connect it to power to complete the connection).