DELTACO S33 Camera Detector User Manual

DELTACO-logo

DELTACO S33 Camera Detector

DELTACO-S33-Camera-Detector-product

Specifications

  • Product Name: Camera Detector
  • Product Model: S33
  • Dimensions: 90mm x 60mm (Approximate, based on image)
  • Charging: DC5V
  • Interface: Type-C (Supports reversible insertion, EU standards compliant)
  • Working Voltage: 3.7V
  • Alarm Mode: Audio-visual
  • Control Mode: Button type
  • Camera Detection: Infrared reflection detection
  • Piezoelectric Ceramic Body Alarm Decibel: 120dB
  • Access Control Mode: Vibration alarm
  • Additional Features: Flashlight mode
  • Power: 1W
  • Product Material: ABS, PCB

Product Overview

DELTACO-S33-Camera-Detector-fig-1 DELTACO-S33-Camera-Detector-fig-2

Usage Instructions

Power On/Off:
Press and hold the function button (labeled ‘1’ in the diagram) for one second to turn on the device.

Mode Selection:

Once powered on, press the function button repeatedly to cycle through the following modes:

  • 1st gear: Constant light mode (for continuous detection)
  • 2nd gear: Detection mode (specific detection function)
  • 3rd gear: Anti-theft mode (vibration alarm)
  • 4th gear: Night light mode (flashlight function)
  • 5th gear: Shutdown mode (turns off the device)

Charging:

Connect the device to a DC5V power source using the provided Type-C charging interface. The Type-C interface supports reversible insertion.

Camera Detection:

Utilize the camera detection window and detection lamp (infrared spotlight) for infrared reflection detection of hidden cameras.

Flashlight Function:

Activate the 4th gear (Night light mode) to use the high brightness white light flashlight.

Certificate of Conformity

DELTACO-S33-Camera-Detector-fig-3

Troubleshooting

  • Device not turning on: Ensure the device is charged. Connect it to a power source using the Type-C cable.
  • Detection not working: Make sure you are in the correct detection mode (1st or 2nd gear). Ensure the detection window is clear and unobstructed.
  • Alarm not sounding: Check if the device is in anti-theft mode (3rd gear) for vibration alarm. Verify the battery level.
  • Charging issues: Try a different Type-C cable or power adapter. Ensure the cable is fully inserted into the charging interface.

Documents / Resources

PDF thumbnailS33 Camera Detector
User Manual · S33, S33 Camera Detector, Camera Detector, Detector

References

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.