TECTINTER PS3 Wireless Smart Gamepad Instruction Manual

TECTINTER PS3 Wireless Smart Gamepad

Product Introduction

This is a smart gaming console with Classic appearance design. It uses 2.4 Ghz wireless transmission technology. it is a best gamepad controller for Android smart phone/Tablet/ TV Box Smart TV.
Exclusive game Store.

• Fit for Android smartphone/ Tablet TV Box/ Smart TV.
• Use 2.4Ghz RF wireless transmission technology. distance 28M.
• Support android standard menu key including MODE.
• Use 2 x AAA batteries (Not included ].
• Service life of buttons: 500000 times.
• Service life of rocker. 500000 times.
• Surface finishes; anti sweat and oil.
• Low power consumption.
  1x Wireless Gamepad
• 1x Nano Receiver.
• Git Box Packed Safely in blister

Fast Start

1. The receiver received intelligence android TV or TV box of a USB interface;
2. The game pad is equipped with batteries, open the power switch to “ON” position,the handles and receiving head automatic connection, the connection is successful after he red LED normally ON, without success, please press MODE button twice quickly and receiver forced the attachment.

Product Overview

Gamepad Operation in Detail

Power On/Off

1. Open the power switch to “ON” positing, the handle will be automatically connected to the receiver, indicates a red LED normally ON after the connection is successful, if is not successful, please switch gamepad power or insert the receiver again.
2. The power switch in the “off position place, the game pad is in completely turned off.power consumption is OmA
   The Game pad according to the prompt after the connection is successful, the game please keep proper distance with the television;
   Gamepad sleep Model
3. (Boot attachment) when there is no connect receiver, after 10 seconds into sleep mode
4. If there is no any operation of shaft and buttons, 5 minutes after go into sleep mode
5. When into Sleep mode need to press the HOME key wake up after a red LED light. can begin to play games
6. The game pad code
7. When the game pad can’t operation or to increase a new game pad, we need the gamepad with the receiver in the code;
8. The receiver is powered on for 15 seconds after treatment of code state;
   • The receiver to the Smart TV or TV box USB port, turn on the TV or TV box power.
   •  The game pad is equipped with battery. the power switch to “ON” position (to code the distance of not more than 2 meters), express press HOME button, LED flashing rapidly marks the state of the code .
   • When the red LED normally on state, the code is successful, if the horse did not succeed.
9. Please turn of the controller power supply wait 3 seconds and then open the power supply or the receiver.

Safety Information

1. When the game pad unexpected disconnection, it is have voltage protection other conditions, can’t be connected making the game pad, and the connection without the function and other crash loading state, then need to turn off the power switch 3 seconds after re open .
2. If you have any other questions, please contact the vendor  .
3. Don’t take this product placed in extremely hot and humid place, put it in a dry place .
4. Children should be used under the supervision of adults .
5. Don’t use alcohol to wipe any part of the product, please use a soft cloth and a small amount of water to clean the product .
6. Can be compatible with PC\ Ps3

Frequently Asked Questions