TECTINTER SN2203 Wireless Controller User Manual

TECTINTER SN2203 Wireless Controller

Function Button Guild

Product parameters

• Voltage: DC3.7V
• Working Current: 120mA
• Usage time: >10H
• Sleep Current: <5uA
• Charging Voltage/Current: DC5V/400mA
• Bluetooth Transmission Distance: <=8M
• Battery Capacity: 1000mAh
• Standby time: 30 Days

Product instructions

SWITCH Mode
In SWITCH host, select Controller Controllers->Change Grip/Order Change Grip/Order, enter into the SWITCH host pairing mode interface, and press L+R on the controller. Press L+R on the controller. Simultaneously press RT + for 2 seconds to enter into SWITCH mode pairing, the LED light of the Controller will flash yellow quickly, and the corresponding LED light of successful pairing will be yellow and long-lighted. If you have already connected successfully, you can press the directly, the LED light will flash yellow slowly and connect back automatically.

Android ShootingPlus mode (i.e. V3/V3+ mode)

Simultaneously press the A+ for 2 seconds to enter V3 Android mode. The controller LED light will flash quickly in pink. When the Android phone searches for the device name “SN2203”, select “connect”. After successful connection, the controller’s LED light will remain pink. Successfully connected, you can press the button directly, the LED light will slowly flash pink, and it will automatically reconnect. ShootingPlus App can be downloaded from various Android mobile app markets.

Android Standard Mode

1. At the same time, press the X+ to enter the standard Android mode, and the controller LED will flash quickly in blue. When the Android/HarmonyOS phone searches for the device name “SN2203”, select “Connect”. After a successful connection, the controller’s LED light will remain green for a long time. Successfully connected, you can press the directly, the LED light will slowly flash blue, and it will automatically reconnect.
2. Android/HarmonyOS standard mode game download, can download various game halls, enter the platform to download the required games.

IOS MFi/Apple Arcade mode (iOS 13.0 and above)
Press the B+for 2 seconds to enter iOS MFi mode, and the controller LED will flash green quickly. When the Apple phone searches for the device name “DUALSHOCK 4 Wireless Controller”, select “Connect”. After a successful connection, the controller LED light will remain green for a long time. Successfully connected, you can press thedirectly, the LED light will slowly flash green, and it will automatically reconnect. MFi games can also be downloaded from the ShanWan MFi app.

PS3/PS4 Mode
Connect the controller directly to the PS3/PS4 host using a USB data cable, press the to perform code matching, and the successful code matching LED will light up white. Successfully connected, you can directly press the , the indicator light will light up and remain white, and it will automatically reconnect.

Dongle Mode
Simultaneously press the LB+ for 2 seconds to enter the PC receiver mode, and the controller LED light will flash red quickly. After a successful connection, the controller LED light will remain red for a long time. It has been successfully connected and can be pressed directly. The controller

Xbox (X-input) Bluetooth mode
Simultaneously press the RB + or 2 seconds to enter the X-input Bluetooth mode, and the controller LED will flash blue quickly. When the PC searches for the device name “Xbox Wireless Controller”, select “Connect”. After a successful connection, the controller LED light will remain blue for a long time. Successfully connected, you can press the directly, the LED light will slowly flash blue, and it will automatically reconnect.

Connection Mode

The controller supports multiple device connections. In the shutdown state, press and hold the specified key+ to switch the connection mode and enter the connection matching state.

Advanced Extension: GamepadSpace App
Open the GamepadSpace App by X + to enter the standard Android mode, click the Bluetooth name Gamepadspace-SN for pairing and connection (Bluetooth can only be connected through the APP) After setting in the GamepadSpace App, it can be effective in Switch, PS3/PS4, PC, Xbox Bluetooth, Android Standard mode and iOS MFi, such as: key replacement, TURBO function, MACRO programming function, joker Settings, motor Settings, gyroscope Settings, etc.The GamepadSpace App for Android phones can be downloaded from various Android mobile app markets. You can download it from the App Store.

PROFILE programming

1. Press the A key + PROFILE key at the same time, the white LED light flashes;
2. Press the M1 key again, the corresponding mode LED stops flashing and returns to its original state; (If M1/M2 is not pressed within 1 minute, it will automatically exit)

• Unmap the M1 key: 
  • Press the mapping M1 button + PROFILE button at the same time;
• Clear all mapped keys:
  • Press and hold the PROFILE button for 5 seconds.

Power ON/OFF

• On: Press and hold the for 1 second to start the gamepad or enter the reconnection state.
• Off: Press and hold thefor 3 seconds

Charge/Sleep/Wake Up

1. When the gamepad is charging, the mode LED indicator light flashes slowly and stays on when fully charged.
2. When the battery power is low, the mode LED indicator flashes quickly.

Sleep/wake function

• Pairing status: the gamepad will sleep if it is not paired successfully within 2 minutes.
• In the reconnection state, the game controller will go to sleep if there is no successful reconnection within 1 minute.
• When Bluetooth is connected, the gamepad will go to sleep if not used within 15 minutes.
• When you need to use it again, you can press the button to wake it up, and it will automatically reconnect.

TURBO Function

1. Action buttons (A / B / X / Y / LT / LB / RT / RB), TURBO function can be set manually.
2. Setting method: For the first time, press the “TURBO” button and hold down the action button at the same time to turn on the TURBO function. Press and hold the action button a second time and press the “TURBO” key againto turn on the Auto Turbo function. The third time is the CLEAR clearing function (TURBO OFF).
3. TURBO speed adjustment method TURBO speed has three gears: 5/12/20 times per second.
   • a. Press the “TURBO” button, and then move the right joystick upward to increase the TURBO speed.
   • b. Press the “TURBO” button, and then adjust the right joystick downward to reduce the TURBO speed.
4. Press and hold the TURBO button for 3 seconds to clear TURBO settings. After the forced motion sensing function is turned on, short press the PROFILE button to switch the motion sensing to replace the left and right joystick keys.

Vibration adjustment

Motor vibration function adjustment steps: Divided into 3 levels: 100%, 70%, 50%, 0% (default is 70%).

1. Press and hold the “TURBO” button, and then move the left joystick upward to increase one level of vibration.
2. Press and hold the “TURBO” button, and then adjust the left joystick downward to reduce vibration by one level.

After successful adjustment, the motor in this gear will vibrate for 0.5 seconds.

RGB Lighting Mode

• Press + SELECT to switch RGB lighting mode:
• Red – green – blue – yellow – purple – white – fantasy colors.

Warning

• Do not put the product in a humid, high-temperature or dusty environment.
• Do not hit, beat, drop or dismount the product.
• Do not use this product near the fire.
• Do not throw the controller with normal litter since there is a battery inside.
• Do not disassemble this product; it will not be covered by the after-sales warranty service.
• The picture on the package may not match the actual product.
• The manufacturer reserves the right to change product design and specifications.

Frequently Asked Questions

Q: How do I reset the controller?
A: Press the Reset Control button to reset the controller settings to default.

Q: How long does the battery last?
A: The usage time of the controller is greater than 10 hours on a full charge.

Q: When bluetooth is turned on, the device can’t search the gamepad?
A: Delete the bluetooth pairing records of the device, and restart the device’s bluetooth searching to connect.

Q: Why the new controlleris not turned on?
A: The battery of the new product is generally low. Please connect the AC 5V adapterwith the USB cable in the package to charge the product