TECTINTER Q103 Bluetooth Controller User Manual

TECTINTER Q103 Bluetooth Controller

Specifications

• Model: Q103
• Compatibility: Android 9.0+, iOS 13.0+, Windows 10+, Switch, PS3
• Connectivity: Bluetooth, 2.4G Wireless, USB (Type-C)
• Working Voltage: DC 3.7V
• Working Current: < 30mA
• Sleep Current: < 5uA
• Charging Voltage/Current: DC 5V/500mA

Troubleshooting

• Controller not connecting:
  • Ensure the controller is fully charged.
  • Make sure the correct mode (X, V, S) is selected for your device.
  • Try re-pairing the controller by pressing the PAIR button and searching again on your device.
  • Ensure Bluetooth is enabled on your device.
  • For 2.4G mode, ensure the USB dongle is properly inserted.
• Buttons not responding:
  • Check if the controller is connected. The LED indicator should be solid.
  • Try resetting the controller (R3 + L3).
  • Test the controller in a different game or application.
• Input lag:
  • Ensure you are within a reasonable range of your device (for Bluetooth/2.4G).
  • Minimize interference from other wireless devices.
  • Try connecting via USB cable if available.
• Controller not charging:
  • Ensure the Type-C cable is securely connected to both the controller and a power source.
  • Try a different Type-C cable or power adapter.
  • The LED indicator should show the charging status.

Q103 Functional diagram

1. D-pad Button
2. X/Y/A/B Button
3. HOME Reconnect/Power Button
4. PAIR Button
5. SELECT Button
6. TURBO Button
7. Left Joystick/L3 Button
8. Right Joystick/R3 Button
9. CLEAR Button
10. START Button
11. L Button
12. L2 Button
13. Type-C Charging Port
14. R2 Button
15. R Button
16. Reset hole
17. LED
18. Mode Switch

Android / iOS / Windows/QUBE
Android 9.0 / iOS 13.0 / Win 10 and above

Bluetooth connection

1. Flip the switch: Switch to X to enter the X- INPUT mode.
2. First use (Power-on pairing):
   • Press the Pair button to start the pairing, and the LED will blink.
   • Turn on your device’s Bluetooth search and connect the Bluetooth device “Xbox Wireless Controller”.
   • The LED is always red when reconnection is successful.
3. Use again (Reconnection):
   1. Press the HOME button to power on, and the LED will blink slowly.
   2. The LED is always red when reconnection is successful.
4. Press the PAIR button to power off the device.

SWITCH Mode

Bluetooth connection

1. Flip the switch: Switch to S to enter the Switch mode.
2. First use (Power-on pairing):
   a) Press the Pair button to start pairing, and the LED will blink.
   b) On the Switch console, select Controller
   → Change Grip/order to enter the Switch console pairing interface for pairing.
   The LED is always green when reconnection is successful.
3. Use again (Reconnection):
   a) Press the HOME button to power on, and the LED will blink slowly.
   b) The LED is always green when reconnection is successful.
4. Press the PAIR button to power off the device.

ShootingPlus for Android

Android 9.0 and above

1. Flip the switch: Switch to V to enter the ShootingPlus mode. ( ShootingPlus App can be downloaded and installed in various mobile app markets.)
2. First use (Power-on pairing):
   a) Press the Pair button to start pairing, and the LED will blink.
   b) Turn on your device’s Bluetooth search and connect the Bluetooth device
   “Q103_ V3”
   a) Connection is successful.
3.  Use again (Reconnection):
   a) Press the HOME button to power on, and the LED will blink slowly.
   b) The LED is always cyan when reconnection is successful.
4. Press the Pair button to power off the device.

2.4G receiver mode

• 2.4G wireless connection operation method for PC devices / smart TVs / TV boxes / PS3 hosts/QUBE:
  1. Insert the 2.4G wireless receiver into a PC device/smart TV,/The USB interface of the TV box.
  2. Wave switch: Set to G mode for 2.4G mode.
  3. First use (power on pairing):
     a) Press the PAIR pairing button to start pairing. The LED blue light flashes rapidly,
     The connection is successful, and the LED blue light is constantly on
  4. The LED is always cyan when reconnected-
  5. First use (power on pairing):
     Press the HOME button to power on and reconnect; the LED flashes slowly.
     Successful reconnection, LED blue light stays on
  6. Press the PAIR pairing button to turn off the device
  7. You can start operating the games downloaded and installed on PC devices/smart TV/TV box/PS3 consoles/QUBE.

Firmware upgrade

1. Connect the V file to the Android phone ShootingPlus app for software upgrade.
2. Support USB wired upgrade

Joystick settings

• Rocker calibration
• Shake the joystick several times in the off state and then turn on the machine. Please do not touch the joystick when turning on the machine. The joystick will be automatically calibrated.
• Joysticks draw a square or a circle
•  + (default is circle).
• Note: The R3 Button is pressed with the Right Joystick.

Electrical parameters

• Working voltage: DC3.7V
• Working current: < 30mA
• Sleep current: < 5uA
• Specification: DC5V/500mA
• Bluetooth transmission distance: <= 8M Battery capacity: 400mAh
• Standby time: 30 days (fully charged)

Charging / sleep/wake-up

1. When charging, the LED will blink slowly; When the battery is full, the LED will stay bright.
2. Sleep / Wake-up function:
   In pairing state, the controller will sleep if it’s not paired successfully within 1 minute.
   Connect back state: The controller will sleep if it is not connected back within 1 minute.
   Bluetooth is connected: The controller will sleep if it is not used within 5 minutes.
   Press the Pair button to turn off the device. Short press the HOME button to directly reconnect.
3. If pairing is not successful within 1 minute, it will enter sleep mode.

FCC Warning

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, a nd can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cauharmful interferencec e to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 0cm between the radiator and your body.