BMPRO RVMC201C Connect Controller
Product Information
Specifications
- Brand: BMPRO
- Model: Node
- Compatibility: Controller, smartphone, tablet
- Maximum Devices Pairing: 4 (including the Controller)
- Communication: Bluetooth
Product Usage Instructions
- Launch the App on your smartphone.
- Using the navigation buttons on the Controller, go to the PA menu item.
- When ‘PA’ appears on the display, press the EXT button to start the pairing process with the Node.
- ‘PA’ will blink for up to 30 seconds or until a device is successfully connected.
- Once paired successfully, you will be directed to the App home screen, and the Bluetooth icon will be visible.
Troubleshooting Node Pairing Issues
If you encounter issues when pairing a mobile device to the Node:
- If pairing fails or ‘–‘ appears on the screen, it may be due to simultaneous connections of four devices to the Node.
- To resolve this, you can either:
- Close the app on one of the connected devices and attempt pairing again.
- Clear the memory of the Node by removing all previously paired devices.
PAIRING THE NODE AND CONTROLLER
Pairing your Controller, smartphone or tablet to the Node is done in three easy steps. The App will guide you through the pairing process.
The Controller will have been paired to your Node at the factory. You should only need to pair your own device or smartphone to the Node.
While the Node can be paired to a total of four devices (including the Controller), you can only pair one device at a time to the Node.
- Launch the App on your phone.
- Using the < or > buttons on the Controller, navigate to the PA menu item.
- When ‘PA’ appears on the display, press the EXT button to start the pairing process to the Node. ‘PA’ will blink for a maximum of 30 seconds or until a device is connected.
- When pairing is successful, you will be taken to the App home screen and the Bluetooth icon will be visible.
NODE PAIRING ISSUES
f you are pairing a mobile device to the Node and pairing fails, or “–” appears on screen, it is mostly likely that four devices are connected to the Node simultaneously.
To resolve this, either:
Close the app on one of the devices that are connected to the Node and try again, or- Clear the memory of the Node of all the previously paired devices.
BMPRO service@teambmpro.com Unit 1, 821 E Windsor Ave, Elkhart IN 46514 USA teambmpro.com
FAQ
Q: How many devices can be paired with the Node?
Q: What should I do if pairing fails?
Documents / Resources
 | RVMC201C Connect Controller |
References
- Smart RV Power & Power Management Systems, Chargers | BMPROteambmpro.com
- User Manualmanual.tools
Wanting a BMPro Manuel for our Greyhawk Class C
Where can I find the BMPRO manual for a Greyhawk Class C RV?
You can find the manual for the BMPRO RVMC201C Connect Controller (commonly installed in Jayco Greyhawk Class C RVs) directly on this page. If you are looking for specific setup or troubleshooting steps, here are the key resources available:
<or>buttons on the controller to navigate to PA, and press the EXT button.If your Greyhawk uses a different BMPRO system (such as the JAYCOMMAND/TravelLINK), you can use the Manuals+ Deep Search or visit the BMPRO Support page for specific model variations.
Read the full Q&A page
the bottom buttons dont work on
Why are the bottom buttons on my BMPRO RVMC201C Connect Controller not working?
If the physical buttons at the bottom of your BMPRO RVMC201C Connect Controller are not responding, please try the following troubleshooting steps:
If the buttons remain unresponsive after these steps, it may indicate a hardware failure. You can contact BMPRO support at service@teambmpro.com for further assistance.
Read the full Q&A page