RVMC201C Connect Controller
“
Product Information
Specifications
- Brand: BMPRO
- Model: Node
- Compatibility: Controller, smartphone, tablet
- Maximum Devices Pairing: 4 (including the Controller)
- Communication: Bluetooth
Product Usage Instructions
- Launch the App on your smartphone.
- Using the navigation buttons on the Controller, go to the PA
menu item. - When ‘PA’ appears on the display, press the EXT button to start
the pairing process with the Node. - ‘PA’ will blink for up to 30 seconds or until a device is
successfully connected. - Once paired successfully, you will be directed to the App home
screen, and the Bluetooth icon will be visible.
Troubleshooting Node Pairing Issues
If you encounter issues when pairing a mobile device to the
Node:
- If pairing fails or ‘–‘ appears on the screen, it may be due
to simultaneous connections of four devices to the Node. - To resolve this, you can either:
- Close the app on one of the connected devices and attempt
pairing again. - Clear the memory of the Node by removing all previously paired
devices.
FAQ
Q: How many devices can be paired with the Node?
A: The Node can be paired with a total of four devices,
including the Controller.
Q: What should I do if pairing fails?
A: If pairing fails or ‘–‘ appears on the screen, try closing
the app on one of the connected devices or clear the Node’s memory
of paired devices.
“`
HELP GUIDE
PAIRING THE NODE AND CONTROLLER
Pairing your Controller, smartphone or tablet to the Node is done in three easy steps. The App will guide you through the pairing process.
The Controller will have been paired to your Node at the factory. You should only need to pair your own device or smartphone to the
Node.
While the Node can be paired to a total of four devices (including the Controller), you can only pair one device at a time to the Node.
1. Launch the App on your phone. 2. Using the < or > buttons on the Controller,
navigate to the PA menu item.
3. When `PA’ appears on the display, press the EXT button to start the pairing process to the Node. `PA’ will blink for a maximum of 30 seconds or until a device is connected.
4. When pairing is successful, you will be taken to the App home screen and the Bluetooth icon will be visible.
TEAM BMPRO
.COM
BMPRO service@teambmpro.com Unit 1, 821 E Windsor Ave, Elkhart IN 46514 USA teambmpro.com
NODE PAIRING ISSUES f you are pairing a mobile device to the Node and pairing fails, or “–” appears on screen, it is mostly likely that four devices are connected to the Node simultaneously.
To resolve this, either: 9 Close the app on one of the devices that
are connected to the Node and try again, or 9 Clear the memory of the Node of all the
previously paired devices.
Documents / Resources
 |
BMPRO RVMC201C Connect Controller [pdf] User Guide RVMC201C Connect Controller, RVMC201C, Connect Controller, Controller |