8BitDo Xbox Mobile Gaming Controller

SPECIFICATION
| Feature | Detail |
|---|---|
| Connectivity | Bluetooth LE 5.0 |
| Battery | 300 mAh Li-ion |
| Dimensions / Weight | 198 × 103 × 53.5 mm |
| Special Hardware | Hall effect joysticks & triggers 2 programmable back paddle buttons Refined D-pad & bumpers Wear-resistant metal joystick rings |
| Software | Supports 8BitDo Ultimate Software V2 for remapping, adjusting triggers, profiles, etc. |
| Device Fit | Accepts devices from 100 mm to 170 mm in length (i.e., pretty much most modern phones) |
Controller Overview
Ultimate Mobile Gaming Controller for Xbox

Front View: View button, LB (Left Bumper), LSB (Left Stick Button), LTS (Left Trigger Stick), D-pad, Profile LED, Profile button, Menu button, RB (Right Bumper), RSB (Right Stick Button), RTS (Right Trigger Stick), Status LED, Xbox button.
Bottom View: Pair button, RT (Right Trigger), Type-C port, P1 (Programmable Button 1), P2 (Programmable Button 2), Power LED, LT (Left Trigger).
- Press the Xbox button to turn on the controller.
- Hold the Xbox button for 6 seconds to turn off the controller.
- Hold the Xbox button for 12 seconds to force the controller to shut down.
Connectivity
Bluetooth Connection
- Press the Xbox button to turn on the controller.
- Press and hold the Pair button for 3 seconds to enter the pairing mode. The Status LED will start to blink rapidly. (This is required for the very first time only)
- Go to your Android device’s Bluetooth list and pair with “8BitDo Ultimate MGX”. The Status LED will remain solid when the connection is successful.
iOS
System Requirement: iOS 18.5 or above.
Bluetooth Connection
- Press the Xbox button to turn on the controller.
- Press and hold the Pair button for 3 seconds to enter the pairing mode. The Status LED will start to blink rapidly. (This is required for the very first time only)
- Go to your iOS device’s Bluetooth list and pair with “8BitDo Ultimate MGX”. The Status LED will remain solid when the connection is successful.
Windows
![]()
System Requirement
Windows 10 (1903) or above.
Connect the controller to your Windows device via the USB cable and wait until the controller is successfully recognized by the device.
Button Customization
- A single button on the controller can be mapped to the P1/P2 buttons.
- LSB (Left Stick Button)/LTS (Left Trigger Stick) and RSB (Right Stick Button)/RTS (Right Trigger Stick) configurations are not supported.
- Button configuration settings will not be saved permanently and will revert to default settings after the controller is powered off or disconnected.
- The Profile LED will blink continuously when the mapped button is pressed.
Example 1: Map a button to P1
Press P1 + A + Profile button to map button A to P1 (P1 = A).
Example 2: Clear P1 mapping
Press P1 + Profile button to clear the mapping for P1 (P1 = null).

Battery
![]()
| Status | Power LED |
|---|---|
| Low battery | Red LED blinks |
| Battery charging | Green LED blinks |
| Fully charged | Green LED remains solid |

- Built-in 300mAh rechargeable lithium battery pack.
- Provides approximately 15 hours of usage time.
- Rechargeable with 1 1-hour charging time.
- The controller will automatically shut down if it fails to connect within 1 minute of startup, or if there are no operations within 15 minutes after establishing a connection.
- The controller will not shut down during a wired connection.
Safety Warnings
![]()
- Please always use batteries, chargers, and accessories provided by the manufacturer.
- The manufacturer is not liable for any safety issues arising from the use of non-manufacturer-approved accessories.
- Do not attempt to disassemble, modify, or repair the device yourself. Unauthorized actions may result in serious injury.
- Avoid crushing, disassembling, puncturing, or attempting to modify the device or its battery, as these actions can be dangerous.
- Any unauthorized changes or modifications to the device will void the manufacturer’s warranty.
- This product contains small parts that may cause choking. Not suitable for children under three years old.
- This product features flashing lights. Individuals with epilepsy or photosensitivity should disable the lighting effects before use.
- Cables may cause tripping or entanglement hazards. Keep them away from walkways, children, and pets.
- Stop using this product immediately and seek medical attention if you experience dizziness, visual disturbances, or muscle spasms.
Ultimate Software
Please visit app.8bitdo.cn to download the Ultimate Software to get the latest firmware.
Support
![]()
Please visit support.8bitdo.com for further information & additional support.
QR code available for direct access to support.
Documents / Resources
![]() | Xbox Mobile Gaming Controller |
References
- User Manualmanual.tools


