N30 2.4G
Instruction Manual
Connection
NES Classic Edition (wireless connection)
- Plug the 2.4G Retro Receiver into your NES Classic Edition.
- Press START on your controller to connect to the Retro Receiver.
- LED will be solid blue when the connection is successful.
• If the connection is lost or you wish to pair with a new retro receiver, press and hold SELECT on the controller for 3 seconds. Blue LED will rapidly blink and be solid blue when the connection is successful.
Battery
| Status | LED Indicator |
| Low battery mode | Power LED in red |
| Battery charging | Power LED in green |
| Battery fully charged | Power LED turns off |
- Built-in 180 mAh Li-on with 25 hours of playtime.
- Rechargeable via USB cable with 60 minutes charging time.
Power Saving
Sleep mode – 15 minutes with no use.
Support
- Please visit support.8bitdo.com for further information and additional support.
Documents / Resources
 |
8BitDo N30 2.4G Wireless Controller Gamepad [pdf] Instruction Manual N30 2.4G, Wireless Controller Gamepad, N30 2.4G Wireless Controller Gamepad |
