8BitDo SN30 2.4G Wireless Gamepad Controller

SN30 and SF30 Instruction Manual

• Please turn off the controller before swapping controller modes.
• Press and hold START for 3 seconds to turn off the controller.

Bluetooth Connection

Controllers will auto reconnect to your devices once they have been paired.

Android (D-lnput)

1.  Press and hold START for 1 second to power on the controller, LED will blink once per cycle.
2.  Press and hold SELECT for 3 seconds to enter pairing mode. Blue LED will rapidly blink.
3.  Go to your Android device’s Bluetooth setting, pair with [8Bitdo xx GamePad].
4.  LED will be solid blue when connection is successful.

USB Connection: connect your 8Bitdo controller to your Android device via USB Cable after step 1.

Windows (X-lnput)

1.  Press and hold START+ X for 1 second to power on the controller, LED will blink twice per cycle.
2.  Press and hold SELECT/or 3 seconds to enter pairing mode. Blue LED will rapidly blink.
3.  Go to your Windows device’s Bluetooth setting, pair with [8Bitdo xx GamePad{x)].
4.  LED will be solid blue when connection is successful.

USB Connection: connect your 8Bitdo controller to your Windows device via USB Cable after step 1.

 macOS

1.  Press and hold START+ A for 1 second to power on the controller, LED will blink three times per cycle.
2.  Press and hold SELECT for 3 seconds to enter pairing mode. Blue LED will rapidly blink.
3.  Go to your macOS device’s Bluetooth setting, pair with [Wireless Controller].
4.  LED will be solid blue when connection is successful.

USB Connection: connect your 8Bitdo controller to your macOS device via USB Cable after step 1.

Switch (by default) 

1.  Press and hold START+ Y for 1 second to power on the controller, LED will blink four times per cycle.
2.  Go to your Switch Home Page to click on Controllers, then click on Change Grip/Order.
3.  Press and hold SELECT for 3 seconds to enter pairing mode. Blue LED will rapidly blink.
4.  LED will be solid blue when connection is successful.

When connected to your Switch, DOWN+ SELECT= Switch HOME button.

Battery

Status	LED Indicator
Low battery mode	LED blinks in red
Battery charging	LED blinks in green
Battery fully charged	LED stops blinking in green

• Built-in 480 mAh Li-on with18 Hours of playtime.
• Rechargeable via USB cable with 1 – 2 hour charging time.
• Press START for 8 seconds to force turn off your controller.

Power Saving  

1.  Sleep mode – 1 minute with no Bluetooth connection.
2.  Sleep mode – 15 minutes with Bluetooth connection but no use.

Press START to wake up your controller.

Support

Please visit http://support.8bitdo.com for further information and additional support.

Documents / Resources

8BitDo SN30 2.4G Wireless Gamepad Controller [pdf] Instruction Manual SN30, SF30, SN30 2.4G Wireless Gamepad Controller, 2.4G Wireless Gamepad Controller

References

• User Manual