ZURN logoModel 350AST
Double Check Valve Assembly

Application

Designed for installation on potable water lines to protect against both backsiphonage and backpressure of polluted water into the potable water supply. The Model 350AST shall provide protection where a potential health hazard does not exist. Ideal for use  where Lead-Free* valves are required.

Standard Compliance (Horizontal and Vertical)

  • ASSE® Listed 1015
  • AWWA Compliant C510 (with gates only), and C550
  • UL® Classified
  • C-UL® Classified
  • FM® Approved
  • CSA® Certified B64.5
  • cUPC® Listed
  • Approved by the Foundation for Cross Connection Control and Hydraulic Research at the University of Southern California
  • Meets the requirements of NSF/ANSI/CAN 61*
    *(0.25% MAX. WEIGHTED AVERAGE LEAD CONTENT)

Materials

Main valve body 304L Stainless steel
Access covers 304L Stainless steel
Internals Stainless steel, 300 Series NORYL™
Fasteners and springs Stainless Steel, 300 Series
Seal ring EPDM (FDA approved)
O-ring Buna Nitrile (FDA approved)

Features

Sizes: 2 1/2”, 3”, 4”, 6”, 8”, 10”
Maximum working water pressure: 175 PSI
Maximum working water temperature: 140˚F
Hydrostatic test pressure: 350 PSI
End connections:
(Grooved for steel pipe) AWWA C606
(Flanged) ANSI B16.42 Class 150

(SHOWN WITH OPTIONAL OSY GATE VALVES)

ZURN 350AST Double Check Valve Assembly

ZURN 350AST Double Check Valve Assembly - icon 1

Options (Suffixes can be combined)

… – with flanged end NRS gate valves (standard)
… FSC –  with epoxy coated wye type strainer (flanged
only)
… G – with grooved end NRS gate valves
… GF –  with grooved inlet gate connection and flanged
outlet gate connection
… FG –  with flanged inlet gate connection and grooved
outlet gate connection
… OSY – flanged end OS&Y gate valves
… OSYG – with grooved end OS&Y gate valves
… PI – with Post Indicator Gate Valves
… BG –  with grooved end butterfly valves with integral
supervisory switches
… BF – with flanged end butterfly valves with integral
supervisory switches
… OSY – flanged end OS&Y gate valves

*New Connected Products. Search ZCSM-PF on Zurn.com for details.

Accessories

  • Connected Pressure Monitor (Model ZCSM-PF)*
  • Connected Flow Meter Option (Model ZCSM-BTM must be ordered with Model ZCSM-PF)*
  • Repair kit (rubber only)
  • Thermal expansion tank (Model XT)
  • OS & Y Gate valve tamper switch (OSY-40)

Dimensions & Weights (do not include pkg.)

ZURN 350AST Double Check Valve Assembly - Dimensions

MODEL 350AST SIZE WEIGHT
WITHOUT GATES WITH NRS GATES (GXF) WITH OS&Y GATES (GXF) WITH NRS GATES (GXG) WITH OS&Y GATES (GXG) WITH BUTTERFLY VALVES (GXG) WITH BUTTERFLY VALVES (GXF)
in. mm lbs. kg lbs. kg lbs. kg lbs. kg lbs. kg lbs. kg lbs. kg
2 1/2 65 33 15 94 43 112 51 86 39 104 47 79 36 89 40
3 80 34 15.4 112 51 130 60 102 46 120 54 83 38 96 44
4 100 35 15.8 168 76 204 93 142 64 184 83 87 39 109 50
6 150 63 29 280 127 338 153 250 114 308 140 150 68 180 82
8 200 177 80 565 256 647 293 525 238 593 269 347 112 393 178
10 250 177 80 769 349 865 392 717 325 807 366 443 200 501 227
MODEL 350AST SIZE DIMENSION (approximate)
A A WITH BUTTERFLY B LESS GATE VALVES C D E NRS GATE E OS&Y OPEN E OS&Y CLOSED E WITH  BUTTERFLY  VALVES F G
in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm
2 1/2 65 31 7/8 810 28 3/4 730 16 5/8 422 4 1/2 114 7 1/4 184 11 1/2 292 17 3/4 451 15 3/8 391 8 1/4 210 5 127 42 1067
3 80 32 7/8 835 29 3/8 746 16 5/8 422 4 1/2 114 7 1/4 184 12 3/4 324 20 1/4 514 17 432 8 1/4 210 5 127 43 1/2 1105
4 100 34 7/8 886 30 1/4 768 16 5/8 422 4 1/2 114 8 203 14 1/2 368 22 1/2 572 18 1/4 464 9 229 5 127 50 1270
6 150 43 1/2 1105 36 1/2 927 22 1/4 565 5 1/2 140 10 254 18 457 30 1/2 775 24 1/4 616 10 1/4 260 6 152 61 5/8 1565
8 200 52 3/4 1340 45 3/4 1162 29 1/2 749 9 1/4 235 11 279 21 1/8 537 37 940 28 1/2 724 18 1/2 470 8 3/8 213 77 1/8 1959
10 250 55 3/4 1416 49 3/4 1264 29 1/2 749 9 1/4 235 12 305 24 3/4 629 45 5/8 1159 34 3/4 883 18 1/2 470 8 3/8 213 85 3/8 2169

Flow Characteristics

ZURN 350AST Double Check Valve Assembly - Characteristics

Typical Installation

Local codes shall govern installation requirements. Unless otherwise specified, the assembly shall be mounted at a minimum of 12″ (305mm) and a maximum of 30″ (762mm) above adequate drains with sufficient side clearance for testing and maintenance.

The installation shall be made so that no part of the unit can be submerged.

Capacity thru Schedule 40 Pipe (GPM)
Pipe size 5 ft/sec 7.5 ft/sec 10 ft/sec 15 ft/sec
2 1/2″ 75 112 149 224
3″ 115 173 230 346
4″ 198 298 397 595
6″ 450 675 900 1351
8″ 780 1169 1559 2339
10″ 1229 1843 2458 3687
12″ 1763 2644 3525 5288

INDOOR INSTALLATION
(350AST with ZCSM-PF Connected Pressure Monitor and ZCSM-BTM Connected Flow Meter accessories)

ZURN 350AST Double Check Valve Assembly - Typical InstallationZURN 350AST Double Check Valve Assembly - Installation

Specifications

The Double Check Backflow Prevention Assembly shall be certified to NSF/ANSI/CAN 61, ASSE® Listed 1015, and supplied with full port gate valves. The main body and access cover shall be 304L Stainless Steel, the seat ring and check valve shall be NORYL™,  the stem shall be stainless steel (ASTM A 276) and the seat disc elastomers shall be EPDM. The checks shall be accessible for maintenance without removing the device from the line. The Double Check Backflow Prevention Assembly shall be a ZURN WILKINS  Model 350AST.

ZURN logo

Zurn Industries, LLC
Wilkins

1747 Commerce Way, Paso Robles, CA U.S.A. 93446 Ph. 855-663-9876, Fax 805-238-5766
In Canada
Zurn Industries Limited
7900 Goreway Drive, Unit 10, Brampton, Ontario L6T 5W6, 877-892-5216
www.zurn.com

Documents / Resources

ZURN 350AST Double Check Valve Assembly [pdf] Installation Guide
350AST Double Check Valve Assembly, 350AST, Double Check Valve Assembly, Check Valve Assembly, Valve Assembly

References

Leave a comment

Your email address will not be published. Required fields are marked *