RED LION PM-50 Setpoint Output Dual Relay Module

UHLU LOKUHLOLA IPHAKATHI LEMODULI

Le phakheji yomkhiqizo kufanele iqukathe izinto ezibalwe ngezansi. Uma kukhona izinto ezingekho noma ezilimele, xhumana ne-Red Lion ngokushesha.

• I-Panel Mount Setpoint Dual Relay Module
• I-Accessory Pack
• Umhlahlandlela wokufaka

DIMENSIONS Ngo amayintshi (mm)

UKUPHEPHA ISIFINYEZO

Yonke imithetho ehlobene nokuphepha, amakhodi endawo, kanye nemiyalelo evela kulo mbhalo noma ezintweni zokusebenza, kufanele kuqashelwe ukuze kuqinisekiswe ukuphepha komuntu siqu kanye nokuvimbela ukulimala ocingweni noma okokusebenza okuxhunywe kulo.
Ungayisebenzisi le mikhiqizo ukuze umiselele ukuxhuma okufanele kokuphepha. Alukho umshini osuselwe kwisofthiwe (noma yimuphi omunye umshini wesimo esiqinile) okufanele ngabe uklanywe ukuthi ube nesibopho sokunakekela ukuphepha kwabasebenzi noma okokusebenza okulandelanayo okungahlonyelwe izivikelo. I-Red Lion ilahla noma imuphi umthwalo wemfanelo womonakalo, oqondile noma owumphumela, owumphumela wokusetshenziswa kwalesi sisetshenziswa ngendlela engahambisani nalokhu kucaciswa.

ISEXWAYISO: Ingozi Yengozi
Funda imiyalelo ephelele ngaphambi kokufakwa nokusebenza kweyunithi.

ISEXWAYISO – INGOZI YOKUQHUBEKA
LAPHO USEZINDAWENI EZINENGOZI, NQUKA AMANDLA NGAPHAMBI KOKUSHINTSHA NOMA AMAMODULI OKUFAKA Izintambo.
Lezi zisetshenziswa zifanele ukusetshenziswa Ekilasini I, Isigaba 2, Amaqembu A, B, C, D, noma ezindaweni ezingenabungozi kuphela.

UKU-ODA ULWAZI

Uhlu lwawo wonke umndeni we-PM-50 wemikhiqizo nezinsiza lungatholakala kokuthi www.redlion.net.

IMICIMBI

Qaphela: Umsingathi we-PM-50 4.3 inch wamukela umkhawulo wamamojula angu-5 kuyilapho umsingathi ongu-3.5 inch wamukela ubuningi obungu-3. Imojula eyodwa kuphela ohlotsheni ngalunye lomsebenzi (okungukuthi ukuxhumana, ukudluliswa, okukhiphayo kwe-analogi) engafakwa.

1. AMANDLA: Amandla anikezwa idivayisi yokusingatha i-PM-50.
   Kumelwe usebenzise isekethe ye-Class 2 ngokuya Ngekhodi Kagesi Kazwelonke (NEC), NFPA-70 noma Ikhodi Yogesi yaseCanada (CEC), Ingxenye I, C22.1 noma Ukunikezwa kwamandla okulinganiselwe (LPS) ngokuya nge-IEC/EN 60950-1 noma i-Limited -Isekethe yamandla ngokuya nge-IEC/EN 61010-1.
   Amandla Amakhulu: 0.6 W
2. I-Setpoint Output: Insimu yemojuli efakekayo
   Uhlobo: Ukudluliselwa kwe-FOM-C okukabili
   Ukuzihlukanisa: 3000 Vrms 1 iminithi.
   Isilinganiso Sokuxhumana Esivamile Esivuliwe:
   Ukudluliselwa Okukodwa Kunikwe Amandla: 5 Amps @ 250 VAC noma 30 VDC (umthwalo ophikisayo).
   Isilinganiso Sothintana Naye Abavalekile:
   Ukudluliselwa Okukodwa Kunikwe Amandla: 3 amps @ 250 VAC noma 30 VDC
   Njengoba konke ukudluliselwa kunikwe amandla, ubuningi bamanje bungu-4 A eRelay ngayinye
   Imikhawulo ye-Relay - Izinhlanganisela ezilandelayo kuphela ezivumelekile:
   Ukulindela Impilo: 100 K imijikelezo min. ngesilinganiso esigcwele sokulayisha. I-RC snubber yangaphandle inweba impilo yokudlulisa ukuze isebenze ngemithwalo engenisayo
3. IZIMO ZEMVELO:
   I-Operating Temperature Range: -10 kuya ku-55 ° C
   Ibanga Lokushisa Lesitoreji: -40 kuya ku-85 ° C
   Ukudlidliza ku-IEC 68-2-6: Isebenza 5-500 Hz, 2 g
   Ukushaqeka ku-IEC 68-2-27: Ukusebenza 10 g
   Umswakama Wokusebenza Nokugcinwa: 0 kuya ku-85% ubukhulu. I-RH ayinciphisi.
   Ukuphakama: Kufika kumamitha angu-2000
   Isigaba Sokufaka II, I-Pollution Degree 2 njengoba kuchazwe ku-IEC/EN 60664-1.
4. IZIQINISEKISO KANYE NEMITHETHO YOMTHETHO:
   I-CE ivunyelwe
   I-EN 61326-1 Ukungavikeleki Ekukhishweni Kwezindawo Zezimboni I-CISPR 11 Ikilasi A
   I-IEC/EN 61010-1
   I-RoHS Iyahambisana
   I-UL Eyingozi: File #E317425
   Indawo evalekile ye-IP25
5. UKWAKHIWA: Indawo ebiyelwe ngepulasitiki enesilinganiso se-IP25. Isetshenziselwa kuphela endaweni ebiyelwe egunyaziwe.
6. IZIXHUMANO: Ikheji yokucindezela okuphezulu-clamp amabhlogo wetheminali
   Ubude Bentambo Yentambo: 0.32-0.35″ (8-9 mm)
   Umthamo we-Wire Gauge: Okune okungu-28 AWG (0.32 mm) okuqinile, okubili okungu-20 AWG (0.61 mm) noma okukodwa okungu-16 AWG (2.55 mm)
7. ISISINDO: 2.24 oz (63.4 g)

UKUFAKWA KWE-HARDWARE

Ifaka Imojuli

ISEXWAYISO - Nqamula wonke amandla kuyunithi ngaphambi kokufaka noma ukukhipha amamojula.
Ukufakwa komkhiqizo kufanele kuhambisane neKhodi Kagesi Kazwelonke (NEC), NFPA-70 noma Ikhodi YaseCanada Kagesi (CED) nanoma yisiphi isiphathimandla sokulawula sendawo.

Kumsingathi ongu-4.3-intshi 

Kutuswa ukuthi imojula edluliselwe edluliselwe ifakwe Kumojuli Yendawo 1 kuphela (eboniswe ngezansi).

1. Ukuze ufake imojuli ohlangothini olude lomsingathi ongu-4.3-intshi, qondanisa ama-latches emojuli nekesi lomsingathi ukuze isixhumi sendiza yangemuva simboze ikhava yemojuli siqondane nokuvuleka kwesixhumi esingemuva kukesi lomsingathi.
2. Ukuze ufake imojuli ohlangothini olufushane lomsingathi ongu-4.3-intshi, zungezisa imojuli ngamadigri angu-180 futhi uqondanise ama-latches kumsingathi nekesi lemojuli ukuze isixhumi se-I/O sibheke phansi.
3. Faka ama-latches osokhaya ezindaweni ezivulekile zemojuli ngokuchezukisa kancane ama-latches ngaphakathi.
4. Cindezela imojuli kukesi lomsingathi ngokulinganayo kuze kube yilapho ama-latches ehlanganyela.
5. Faka Okhiye Bemojula phakathi kwemojuli ngayinye njengoba kuboniswa ngokufaka ngokugcwele imilenze Yokhiye Wemojula endaweni yokukhala kuze kube yilapho inkinobho Kukhiye Wemojuli iqondana nembobo enikezwe ekesini. Cindezela ukufaka inkinobho embobeni. Phinda lokhu kufakwa phakathi kwemojuli ngayinye ohlelweni lwakho ukuze unikeze ukufakwa okuvikeleke kakhulu.
6. Uma usuqedile ukwengeza amamojula, ikhava yangemuva kufanele ifakwe ngendlela efanayo namamojula.

Kumsingathi ongu-3.5-intshi 

Kunconywa ukuthi imojula edluliselwe phambili ifakwe ngqo ngemuva komsingathi (okuboniswe ngezansi), hhayi ngemuva kwanoma iyiphi enye imojula.

1. Qondanisa ama-latches emojuli nekesi lomsingathi ukuze isixhumi sendiza yangemuva simboze ikhava yemojuli siqondanise nokuvuleka kwesixhumi sendiza yangemuva kukesi lomsingathi.
2. Faka ama-latches emojula ezindaweni ezivulekile endaweni yokusingatha ngokuchezukisa kancane ama-latches ngaphakathi.
3. Cindezela imojuli kukesi lomsingathi ngokulinganayo kuze kube yilapho ama-latches ehlanganyela.
4. Faka Okhiye Bemojula phakathi kwemojuli ngayinye njengoba kuboniswa ngokufaka ngokugcwele imilenze Yokhiye Wemojula endaweni yokukhala kuze kube yilapho inkinobho Kukhiye Wemojuli iqondana nembobo enikezwe ekesini. Cindezela ukufaka inkinobho embobeni. Phinda lokhu kufakwa phakathi kwemojuli ngayinye ohlelweni lwakho ukuze unikeze ukufakwa okuvikeleke kakhulu.
5. Uma usuqedile ukwengeza amamojula, ikhava yangemuva kufanele ifakwe ngendlela efanayo namamojula.

Ukukhipha Imojuli

ISEXWAYISO - Nqamula wonke amandla kuyunithi ngaphambi kokufaka noma ukukhipha amamojula.

Ukuze ususe imojuli ekuhlanganiseni, qala ngokususa izingidi zemojuli usebenzisa isikrudrayiva esincane njengoba kukhonjisiwe. Bese ukhipha i-latch ngokuchezulela i-latch ngaphakathi noma ngokusebenzisa i-screw driver encane, uyifake esikhaleni esiseceleni kwekesi, futhi ukhiphe i-latch ngaphakathi ukuze ukhiphe i-latch. Lapho ama-latches enqanyuliwe, donsa imodyuli bese uyisusa emhlanganweni.

I-WIRING

Uxhumano Lwezintambo

Wonke amandla, okokufaka kanye nezintambo eziphumayo (I/O) kufanele zihambisane ne-Class I, izindlela zokufaka izintambo zeSigaba 2 futhi ngokuhambisana negunya elinegunya. Lapho uxhuma abathintwayo abadluliselwe komunye nomunye, kufanele usebenzise isekethe Yekilasi 2 ngokuya Ngekhodi Kagesi Kazwelonke (NEC), NFPA-70 noma Ikhodi Yogesi yaseCanada (CEC), Ingxenye I, C22.1 noma Ukunikezwa Kwamandla Alinganiselwe (LPS) ngokuya nge-IEC/ I-EN 60950-1 noma isekethe yamandla anomkhawulo ngokuya nge-IEC/EN 61010-1.
Ukuxhunywa kukagesi kwenziwa ngekheji-clamp amabhlogo wetheminali atholakala ngemuva kwemitha. Hlikihla bese uxhuma intambo ngokwezicaciso zebhulokhi yetheminali ekhasini lesi-2.

Sicela uqaphele ukugcina amaphuzu alandelayo:

• Ukunikezwa kwamandla kumele kugxunyekwe eduze neyunithi, ngokuvamile kungabi ngaphezu kwamafidi angu-6 (1.8 m) wekhebula phakathi kokunikezwayo ne-PM-50. Ngokufanelekile, ubude obufushane kakhulu kufanele busetshenziswe.
• Intambo esetshenziswa ukuxhuma ugesi we-PM-50 kufanele okungenani ibe nezintambo ezingamageji angu-22 zikalwe ngokufanelekile kumazinga okushisa emvelo efakwa kuyo. Uma kusetshenziswa ikhebula elide, ucingo lwegage olusindayo kufanele lusetshenziswe. Umzila wekhebula kufanele ugcinwe kude nezixhumi ezinkulu, iziguquli, namanye amadivaysi angase akhiphe umsindo omkhulu kagesi.
• Ukunikezwa kwamandla okune-NEC Class 2 noma Umthombo Wamandla Alinganiselwe (LPS) kanye nesilinganiso se-SELV kuzosetshenziswa. Lolu hlobo lokunikezwa kwamandla luhlinzeka ngokuhlukaniswa kumasekhethi afinyelelekayo kusuka kuvolthi eyingozitagamaleveli e-e akhiqizwa ugesi wamapayipi ngenxa yamaphutha awodwa. I-SELV isifinyezo se-"safety extra-low voltage." Ukuphepha kwevolumu ephansi kakhulutagama-circuits azokhombisa umthamotagKuphephile ukuthinta kokubili ngaphansi kwezimo ezijwayelekile zokusebenza nangemva kwephutha elilodwa, njengokuhlukana kongqimba lwe-insulation eyisisekelo noma ngemva kokwehluleka kwengxenye eyodwa. Idivayisi efanelekile yokunqamula izohlinzekwa umsebenzisi wokugcina.

Isimo Semojuli (STS) LED

Dlulisela ama-LED

RED LION ILAWULA UKUSEKELWA NGOBUCHWEPHESHE
Uma nganoma yisiphi isizathu unenkinga yokusebenza, noma ukuxhuma, noma umane unemibuzo mayelana nomkhiqizo wakho omusha, thintana nabosekelo lobuchwepheshe be-Red Lion.

Ukusekela: support.redlion.net
Webindawo: www.redlion.net
Ngaphakathi kwe-US: +1 877-432-9908
Ngaphandle kwe-US: +1 717-767-6511
I-Red Lion Controls, Inc.
20 Willow Springs Circle York, PA 17406

I-COPYRIGHT

©2021 Red Lion Controls, Inc. Wonke amalungelo agodliwe. I-Red Lion kanye nelogo ye-Red Lion yizimpawu zokuthengisa ze-Red Lion Controls, Inc. Wonke amanye amagama ezinkampani nemikhiqizo ayizimpawu zokuthengisa zabanikazi bazo.

ISIQINISEKISO SOMKHAWULO

• I-Red Lion Controls Inc. (“Inkampani”) iqinisekisa ukuthi yonke Imikhiqizo ngeke ingabi nasici empahleni kanye nokusebenza ngaphansi kokusetshenziswa okuvamile ngesikhathi esihlinzekwe “KuSitatimende Sezikhathi Zesiqinisekiso” (esitholakala ku-www.redlion.net) yamanje ngesikhathi sokuthunyelwa kweMikhiqizo (“Isikhathi Sewaranti”). NGAPHANDLE KWESIQINISEKISO ESISHIWO PHEZULU, INKAMPANI AYENZI SIQINISEKISO NOMA YILUPHI NGENHLONIPHO NGEMIKHIQIZO, KUHLANGANISA NANOMA YIYIPHI (A) ISIQINISEKISO SOKUDAYISWA; (B) ISIQINISEKISO SOKULUNGELA INHLOSO ETHILE; NOMA (C) ISIQINISEKISO ESIPHAMBISANA NOKWEHLULEKA KWAMALUNGELO EMPAHLA ENGAHLAKANIPHILE KOMPHAKATHI WESITHATHU; KUNGAKHATHALISEKILE NOMA OKUSHIWO NGUMTHETHO, INKOSI YOKUSEBENZA, INKAMBO YOKUSEBENZA, UKUSETSHENZISWA KWEZOHWEBO NOMA OKUNYE. Ikhasimende lizoba nesibopho sokunquma ukuthi uMkhiqizo ufanelekele ukusetshenziswa yiKhasimende nokuthi lokho kusetshenziswa kuthobelana nanoma yimuphi umthetho osebenzayo wendawo, wesifunda noma wenhlangano.
• INkampani ngeke ibe nesibopho sokwephulwa kwesiqinisekiso esishiwo endimeni (a) uma (i) iphutha liwumphumela wokwehluleka kweKhasimende ukugcina, ukufaka, ukugunyaza noma ukunakekela uMkhiqizo ngokuya ngemibandela ebekiwe; (ii) Ikhasimende lishintsha noma lilungise lowo Mkhiqizo ngaphandle kwemvume ebhalwe phansi yeNkampani.
• Kuncike endimeni (b), mayelana nanoma yimuphi uMkhiqizo onjalo ngesikhathi seSiqiniseko, iNkampani ngokubona kwayo iyodwa,
  • ukulungisa noma ukushintsha uMkhiqizo; noma
  • isikweletu noma ubuyisele intengo yoMkhiqizo inqobo nje uma, uma iNkampani icela kanjalo, iKhasimende, ngezindleko zeNkampani, lizobuyisela lowo Mkhiqizo eNkampanini.
• IZISOMBULULO EZISELWE ESIGABENI (c) ZIYOBA YIKHASI LODWA LWEKHASIMI FUTHI ELIKHETHEKILE KANYE NESIBOPHO SONKE SENKAMPANI NGANOMA YILUPHI UKWEPHUKELA KWESIQINISEKISO ESIKHAWULE ESIBELWE ESIGABENI (a).
  NGOKUFAKA LO MKHIQIZO, UYAVUMA IMIGOMO YALESI SIQINISEKISO, KANYE NAYO YONKE EMINYE IZIMALI NEZIQINISEKISO KULO MBHALO.

Amadokhumenti / Izinsiza

RED LION PM-50 Setpoint Output Dual Relay Module [pdf] Umhlahlandlela wokufaka I-PM-50 Setpoint Output Dual Relay Module, PM-50, Setpoint Output Dual Relay Module, Dual Relay Module, Relay Module, Module

Izithenjwa

• Imaniwali yosebenzisayo