I-GT 2X10 LA 2 Way Self Powered Line Array
Imaniwali yosebenzisayo
Inguqulo ebuyekeziwe ye-pdf yaleli bhukwana ihlala itholakala lapha
Izinkomba Zokuphepha
Sicela uyifunde ngaphambi kokusebenzisa isistimu futhi uyigcine ukuze uyisebenzise kamuva
PRO DG SYSTEMS® IYAKUBONGA NGOKUTHOLA LOKHU UHLELO LOMSINDO LOBUCHWEPHESHE LUKLANYWE NGOKUPHELELE, EKHIWE FUTHI YENZISWA KAHLE E-SPAIN, KAKHULU NEZINXAXA ZASE-EUROPE FUTHI SIFISA UKUTHI UJABULELE NGEQINISO ELIPHEZULU KANYE NOKWENZA KWALO.
- Lolu hlelo luklanywe, lwakhiwe futhi lwathuthukiswa yi-Pro DG Systems® ngokuhleleka okuphelele kokusebenza. Ukugcina lesi simo nokuqinisekisa ukusebenza okulungile, umsebenzisi kufanele ahloniphe lezi zinkomba ezilandelayo nezeluleko zaleli bhukwana.
UBUKHONO, UKUPHEPHA KANYE NOKUSEBENZA KOKUSEBENZA KOHLELO KUPHELA FUTHI KUQINISEKISE KAPHELA YI-PRO DG SYSTEMS UMA: - Ukuhlanganisa, ukukhohlisa, ukulungisa kabusha kanye nokulungiswa noma ukulungiswa kwenziwa yi-Pro DG Systems.
- Ukufakwa kukagesi kuhambisana nezidingo ze-IEC (ANSI).
- Isistimu isetshenziswa ngokuya ngezinkomba zokusetshenziswa. ISEXWAYISO:
- Uma izivikeli zivuliwe noma izingxenye ze-chassis zisusiwe, ngaphandle kwalapho lokhu kungenziwa khona mathupha, izingxenye ezibukhoma zingaba
- Noma yikuphi ukulungisa, ukukhohlisa, ukuthuthukiswa noma ukulungiswa kabusha kwesistimu kufanele kwenziwe kuphela futhi ngokukhethekileyo yi-Pro DG Systems. I-PRO DG SYSTEMS AYINAMANDLA NGANOMA YIKUPHI UKULIMALA KOHLELO OKUBANGWE UKUKHOHLISA, UKULUNGISWA, UKWENZA KAKHULU NOMA UKUBUYEKEZWA OKUBONAKALA OKUNGAGUNYAZIWE UMUNTU WOMUNTU WE-PRO DG SYSTEMS.
- Amazinga aphezulu wesipikha angabangela ukulimala kokuzwa, kufanele agweme ukuthintana ngokuqondile nezikhulisa-zwi ezisebenza emazingeni aphezulu, kungenjalo kufanele asebenzise izivikeli zokuzwa.
UKUXHUMANA OKUNQANDA:
- Isistimu yakhelwe ukusebenza ngokuqhubekayo.
- Isethi yokusebenza voltage kumele ifane nesiphakeli sendawo samapayipi amakhulu
- Amayunithi kufanele axhunywe kumapayipi amakhulu ngeyunithi yamandla ahlinzekiwe noma ikhebula lamandla.
- Iyunithi yamandla: ungalokothi usebenzise umthofu wokuxhumana owonakele. Noma yiluphi uhlobo lomonakalo kufanele lulungiswe.
- Gwema ukuxhuma ekuphakeleni kwamapayipi amakhulu kumabhokisi abasabalalisi kanye nabanye abasebenzisi bamandla abambalwa.
- Isokhethi yepulaki yokuphakelwa kwamandla kufanele ibekwe eduze kweyunithi futhi kufanele ifinyeleleke kalula.
INDAWO ISIMO:
- Isistimu kufanele ime kuphela endaweni ehlanzekile futhi evundlile ngokuphelele
- Uhlelo akumele luvezwe kunoma yiluphi uhlobo lokudlidliza phakathi nalo
- Gwema ukuthintana namanzi noma izindawo ezimanzi. Ungabeki izinto eziqukethe uketshezi ohlelweni.
- Thola ukuthi isistimu inomoya owanele futhi ungavimbi noma uvale noma yikuphi ukuvuleka kokukhipha umoya. Ukuvimbela ukungena komoya kungabangela ukushisa ngokweqile ohlelweni.
- Gwema ukuchayeka okuqondile nelanga kanye nokuba seduze nemithombo yokushisa noma imisebe.
- Uma isistimu iba noshintsho oludlulele kuzinga lokushisa kungase kuthinte ukusebenza kwayo, ngaphambi kokuqala isistimu yethemba ukuthi isifinyelele izinga lokushisa legumbi.
IZISEKELO:
- Ungabeki isistimu kusisekelo esingaqinile esingadala umonakalo kubantu noma ohlelweni, sisebenzise kuphela netroli, irack, i-tripod noma isisekelo esinconyiwe noma esihlinzekwe yi-Pro DG Systems ngokulandela izinkomba zokufaka. Inhlanganisela yesistimu kufanele be unyakaze ngokucophelela.
Ukusetshenziswa kokusetshenziswa kwamandla ngokweqile kanye nephansi elingalingani kungabangela inhlanganisela yesistimu futhi ime ukuthi iqhubeke. - Imishini eyengeziwe: ungasebenzisi okokusebenza okwengeziwe okunganconywanga yi-Pro DG Systems. Ukusetshenziswa kwemishini enganconywa kungabangela izingozi nokulimala ohlelweni.
- Ukuze kuvikelwe isistimu ngesikhathi sezulu esibi noma lapho ishiywe ingagadiwe isikhathi eside, ipulaki eyinhloko kufanele inqanyulwe. Lokhu kuvimbela isistimu ukuthi ilinyazwe umbani kanye nokunyuka kwamandla ekuphakeleni kwamapayipi e-AC.
KUNCONYWA KUMSEBENZISI FUNDA LEMIYALELO NGAPHAMBI KOKUSEBENZISA UHLELO FUTHI UGCINE UKUZE UYISEBENZISE NGEMUVA.
I-PRO DG SYSTEMS AYINAMANDLA NGOKUNGANELE UKUSETSHENZISWA KOHLELO NGABASEBENZI ABANGAGUNYAZWE NGAPHANDLE KOLWAZI OLWEnele LOKUSEBENZISA.
UKUSETSHENZISWA KWEMIKHIQIZO YE-PRO DG SYSTEMS IKHOMBISELWE OCHWEPHESHE ABAGUNYAZIWE OKUMELE BABE NOLWAZI OLWEnele LOKUSETSHENZISWA KOHLELO FUTHI NJALO BEHLONIPHA IZIKHOMBISO EZboniswe ngezansi.
Isimemezelo Sokuvumelana
INKAMPANI YOKUTHUMELA
I-JOSE CARLOS LOPEZ PRODUCTION, SL (PRO DG SYSTEMS)
I-CIF/VAT: ESB14577316
UMnu. José Carlos Lopez Cosano umkhiqizi nommeleli we-JOSE CARLOS LOPEZ PRODUCTION SL,
IQINISEKISA FUTHI ISHO NGENGOZI YAYO
Ukuthi umkhiqizo onereferensi ye-GT2X10 LA incazelo yawo ithi LINE ARRAY 2X10” + 2X1” 900W 16 Ohm uhlangabezana nemibandela evezwe kulezi ziqondiso ezilandelayo zase-Europe:
I-vol ephansitage 2006/95/CE
Ukuhambisana kwe-Electromagnetic 2004/108/CE
Izinsalela zezinhlelo zikagesi neze-elekthronikhi 2002/96/CE
Imikhawulo ekusetshenzisweni kwezinto ezithile eziyingozi ezinhlelweni zikagesi neze-elekthronikhi 2001/95/CE
Ukuthi umkhiqizo onereferensi ye-GT2X10 LA incazelo yawo ithi LINE ARRAY 2X10” + 2X1” 900W 16 Ohm ihambisana nemithetho elandelayo YaseYurophu Evumelanayo:
I-FIRMA: UJosé Carlos López Cosano
Omele inkampani
Isingeniso
Le manuwali yakhelwe ukusiza bonke abasebenzisi bohlelo i-GT 2X10 LA ye-Pro DG Systems ekusebenziseni kwayo okulungile kanye nokuqonda izinzuzo nokuhlukahluka okufanayo. I-GT 2X10 LA iyisistimu ye-Line Array eklanywe ngokuphelele, yakhiqizwa futhi yathuthukiswa e-Spain, kusetshenziswa ngokukhethekile izingxenye zaseYurophu.
I-GT 2X10 LA
Idizayinwe ngokuphelele, yakhiwe futhi yathuthukiswa eSpain, kusetshenziswa izingxenye zaseYurophu kuphela.
Incazelo
I-GT 2X10 LA iyisistimu ye-2-way Line Array yokusebenza okuphezulu efakwe izipikha ezimbili (2) ezingu-10” endaweni ebiyelwe eshuniwe. Isigaba se-HF sinezishayeli zokuminyanisa ezimbili (2) ze-1” ezihlanganiswe ne-waveguide. Ukucushwa kwe-transducer kukhiqiza ukuhlakazeka kwe-symmetric nokuvundlile okungu-90º ngaphandle kwama-lobe esibili phezu kwebanga lemvamisa. Kuyisixazululo esiphelele njenge-PA eyinhloko, i-frontfill kanye ne-sidefill emicimbini yangaphandle noma ukufakwa unomphela.
Ukucaciswa kobuchwepheshe
| Ukuphatha Amandla: | 900 W RMS (EIA 426A standard) / 1800 W uhlelo / 3600 W ukuphakama. |
| Ukuzimela Okuncane: | 16 ohm. |
| Ukuzwela Okumaphakathi: | 101 dB / 2.83 V / 1m (isilinganiso se-wideband engu-100-18000 Hz). |
| I-SPL Enkulu Ebaliwe: | / 1m 129 dB okuqhubekayo/ 132 dB uhlelo / 135 dB ukuphakama (iyunithi eyodwa) / 132 dB okuqhubekayo / 135 dB uhlelo / 138 dB ukuphakama (amayunithi amane). |
| Ibanga Lemvamisa: | +/- 3 dB ukusuka ku-70 Hz ukuya ku-20 KHz. |
| Ukuqondisa Okuncane: | (-6 dB) 90º ukumbozwa okuvundlile, ukumbozwa okuqondile kuncike kubude noma ukucushwa komuntu siqu. |
| Umshayeli Wefrikhwensi Ephansi / Emaphakathi: | Izipikha ezimbili (2) ze-Beyma ze-10″, 400 W, 16 Ohm. |
| Ukusikwa kozakwethu be-Subwoofer: | Kanye ne-subwoofer system GT 118 B, GT 218 B noma GT 221 B: 25 Hz Butterworth 24 isihlungi – 90 Hz Linkwitz-riley 24 isihlungi. |
| I-Mid Frequency Cut-off: | 90 Hz Linkwitz-riley 24 isihlungi – 1100 Hz Linkwitz-riley 24 isihlungi. |
| Umshayeli wefrikhwensi ephezulu: | Abashayeli ababili (2) be-Beyma abangu-1″, 8 Ohm, 50 W, 25mm ukuphuma, (44.4mm) ngekhoyili yezwi i-Mylar diaphragm. |
| Ukunqunywa kwemvamisa ephezulu: | Isihlungi esingu-1100 Hz Linkwitz-riley 24 – 20000 Hz Linkwitz-riley 24 isihlungi |
| Kunconyiwe Ampophilayo: | I-Pro DG Systems GT 1.2 H noma i-Lab.gruppen FP 6000Q, FP 10000Q. |
| Izixhumi: | 2 Izixhumi zesipikha ze-NL4MP Neutrik. |
| I-Acoustic Enclosure: | Imodeli ye-CNC, engu-15mm eyenziwe nge-birch plywood efakwe ngaphandle. |
| Qeda: | Isiphetho esijwayelekile ngopende omnyama wokumelana nesimo sezulu esiphezulu. |
| Ubukhulu beKhabhinethi: | (HxWxD); 291x811x385mm (11,46”x31,93”x15,16”). |
| Isisindo: | 34,9 Kg (76,94 lbs) inetha / 36,1 Kg (79,59 lbs) nokupakishwa. |
Imininingwane yezakhiwo
Ngaphakathi kwe-GT 2X10 LA
I-GT 2X10 LA ibala ngezipikha ezimbili ze-Beyma ezingu-10”, 400 W (RMS). Idizayinelwe ngokukhethekile ngaphansi kwemingcele yethu ukuze isebenze kahle kakhulu isistimu.
IZICI EZIYINHLOKO
Ukubamba amandla aphezulu: 400 W (RMS)
2” ikhoyili yezwi yocingo lwethusi
Ukuzwela okuphezulu: 96 dB (1W / 1m)
I-FEA ithuthukise isekethe kazibuthe ye-ceramic
Idizayinelwe ngobuchwepheshe be-MMSS yokulawula okuphezulu, umugqa kanye nokuhlanekezela okuphansi kwe-harmonic
Ukwelashwa kwe-cone engangeni manzi nhlangothi zombili zekhoni
Ukuthutha okulawulwayo okunwetshiwe: I-Xmax ± 6 mm
Umonakalo ± 30 mm
Ukuhlanekezela okuphansi kwe-harmonic kanye nokuphendula okuqondile
Uhla olubanzi lwezinhlelo zokusebenza zamafrikhwensi aphansi naphakathi nendawo aphansi
IMICIMBI YOBUCHWEPHESHE
| Ububanzi bokuzisholo | 250 mm (10 in) |
| I-Impedans elinganiselwe | 160 |
| I-impedance encane | 40 |
| Amandla wamandla | I-400 W (RMS) |
| Amandla ohlelo | 800 W |
| Ukuzwela | 96 dB 1W / 1m @ ZN |
| Ibanga lemvamisa | 50 - 5.000 Hz |
| Ncoma. I-Enclosure vol. | 15 / 5010,53 / 1,77 ft3 |
| Ikhoyili yezwi ubukhulu | 50,8 mm (2 in) |
| Isici se-BI | 14,3 N/A |
| Ukuhambisa isisindo | 0,039 kg |
| Ubude bekhoyili yezwi | 15 mm |
| Ukuphakama kwegebe lomoya | 8 mm |
| I-Xdamage (ukuphakama ukuya phezulu) | 30 mm |
Idizayinelwe ngokukhethekile ngaphansi kwemingcele yethu ukuze isebenze kahle kakhulu isistimu. 
ULWAZI LOKUKHULISA
* Amapharamitha we-TS akalwa ngemuva kwesikhathi sokuzivivinya kusetshenziswa ukuhlolwa kwamandla okubekwe ngaphambili. Izilinganiso zenziwa nge-transducer ye-laser yesivinini futhi zizobonisa imingcele yesikhathi eside (uma isipikha sesisebenze isikhathi esifushane).
** I-Xmax ibalwa ngokuthi (Lvc – Hag)/2 + (Hag/3,5), lapho i-Lvc ingubude bekhoyili yezwi kanti u-Hag uwubude begebe lomoya.
I-AIR IMPEDANCE CURVE YAMAHHALA 
IFREQUENCY RESPONSE NOKUPHATHEKA 
Qaphela: Impendulo yefrikhwensi ye-eksisi ikalwa ngesipika esimi phezu kwe-baffle engapheli egumbini le-anechoic, 1W @ 1m
Ngaphakathi kwe-GT 2X10 LA
I-GT 2X10 LA iphinde yakhiwe uphondo oluqondisayo olungaguquki oluklanyelwe ukusebenza namashayeli amabili wokucindezelwa we-Pro DG Systems angu-50 W RMS ahlanganiswe ne-waveguide. Izici eziqondile zokuqondisa zale modeli ziqinisekisa ikhono lokumboza ububanzi obungu-90º ngokuvundlile kanye no-20º ububanzi ngokuqondile, cishe kunoma iyiphi imvamisa ngaphakathi kwebanga lokusebenza kwayo. Ukuqinisekisa ukukhululeka kwe-resonance, le flare yakhiwe nge-aluminium ekhonjiwe, enomkhawulo oyisicaba ukuze kube lula ukukhwezwa kwe-flush.
IZICI EZIYINHLOKO
- Idizayinelwe ukusebenza nezishayeli zokuminyanisa ezimbili (2) ze-Pro DG Systems ze-50 W RMS.
- Inikeza impendulo efanayo, ivuliwe futhi ivaliwe - i-eksisi ene-neutral and natural frequency reproduction
- Ukumboza ama-engeli angu-90º endizeni evundlile kanye no-20º endizeni eqondile
- Ukulawula okuqondile okuqondile kubhendi yokudlula
- Ukwakhiwa kwe-aluminium
IMICIMBI YOBUCHWEPHESHE 
Ngaphakathi kwe-GT 2X10 LA
I-GT 2X10 LA iphinde yakhiwe abashayeli ababili be-Beyma compression be-50 W RMS abahlanganiswe nomhlahlandlela wamagagasi. Idizayinelwe ngokukhethekile ngaphansi kwemingcele yethu ukuze isebenze kahle kakhulu isistimu.
Inhlanganisela yomshayeli wokucindezelwa wamandla aphezulu we-neodymium one-waveguide inikeza ukuhlangana okungcono kakhulu kokusebenza okungcono kakhulu kwe-GT 2X10 LA ukuxazulula inkinga enzima yokufinyelela ukuhlangana okuhle phakathi kwama-transducer amafrikhwensi aphezulu aseduze. Esikhundleni sokusebenzisa imishini ebizayo futhi enzima yokubumba igagasi, i-waveguide elula kodwa esebenzayo iguqula indawo eyisiyingi yomshayeli wokucindezelwa ibe indawo engunxande, ngaphandle kokuvula i-engeli okungadingekile ukuze inikeze ukugoba okuphansi ngaphambili kwe-acoustic wave, ifika ukuze igcwalise imfuneko yokugoba edingekayo. ukuze uthole ilunga elilungile lokuhlanganisa i-acoustic phakathi kwemithombo eseduze kuze kube ngu-18 KHz. Lokhu kufinyelelwa ngobude obuncane obungaba khona bokuhlanekezela okuphansi, kodwa ngaphandle kokuba kufushane kakhulu, okungadala ukuphazamiseka okunamandla kwefrikhwensi ephezulu.
- 4” x 0.5” ophumayo ongunxande
- Isekethe kazibuthe ye-Neodymium yokusebenza kahle okuphezulu
- Ukuhlangana kwe-acoustical okusebenzayo kufika ku-18 KHz
- Ukuzwela kweqiniso okungu-105 dB 1w@1m (isilinganiso esingu-1-7 KHz)
- Ibanga lefrikhwensi enwetshiwe: 0.7 - 20 KHz
- Ikhoyili yezwi engu-1.75” enamandla okubamba ama-50 W RMS
UKUSUKAZWA OKUVULILE
UKUSABAKAZEKA OKUME 
Amanothi: ukuhlakazwa kukalwa ngamagagasi amabili ahlanganiswe nophondo lwe-90º x 5º ekamelweni le-anechoic, 1w @ 2m.
Zonke izilinganiso zama-engeli zisuka ku-eksisi (45º kusho +45º).
DIMENSION IMIDLALO 
Qaphela: * Ukuzwela kukalwe ebangeni elingu-1m ku-eksisi ngokufaka okungu-1w, okulinganiselwe kububanzi obungu-1-7 KHz
IZINTO ZOKWAKHA
| I-Waveguide | I-Aluminium |
| I-diaphragm yomshayeli | I-polyester |
| Ikhoyili yezwi yomshayeli | I-Edgewound aluminium iribhoni wire |
| Ikhoyili yezwi lomshayeli yangaphambili | Kapton |
| Umazibuthe womshayeli | I-Neodymium |
Ukugoqa Hardware
I-magnetic pinlock iwukulungiswa kokuvikeleka okusungulayo okugwema ukulahleka kwayo futhi ivumele ukungena kalula kwehadiwe yendiza ngenxa yezakhiwo zayo kazibuthe.
I-Rigging Hardware ye-GT 2X10 LA Ihlanganiswe: uhlaka lwensimbi olungasindi + 4 ophinikhodi kazibuthe + iketanga ukusekela isisindo esiphezulu samathani angu-1.5. Ivumela ukukhuphula isamba samayunithi angu-16 i-GT 2X10 LA 
Izingxenyekazi zezindiza zendiza zifakwe kukhabhinethi ezinamamaki e-angulation ahlukene.
Imodi yesitaki yokuguquguquka okukhulu nokuhlanganisa.
KUBALULEKILE KAKHULU: ukusetshenziswa kabi kohlaka nezingxenye kungaba isisusa sokuqhekeka okungase kubeke engozini ukuphepha kwelungu elifanayo. Ukusebenzisa uhlaka olulimele kanye nezingxenye kungadala amaphutha amakhulu.
Isofthiwe yokubikezela.
Ku-Pro DG Systems siyazi ukuthi ukwenza izipikha zekhwalithi ephezulu kuyingxenye ebalulekile yomsebenzi wethu. Bese-ke, ukunikeza iwaranti yokusebenzisa izikhulumi ngendlela efanele kungenye ingxenye eyisisekelo futhi emsebenzini wethu. Amathuluzi amahle enza umehluko wokusebenzisa kahle uhlelo.
Ngesofthiwe yokuqagela ye-Ease Focus V2 ye-GT 2X10 LA singaklama ukucushwa okuhlukile phakathi kwamasistimu futhi silingise ukuziphatha kwawo ezindaweni nezimo ezihlukahlukene njengokuthola ulwazi: Ukufakwa, ukuvama, i-SPL nokuziphatha kwesistimu evamile ngendlela elula nenethezekile. Kulula ukuyiphatha futhi sinikeza izifundo zokuqeqesha zabasebenzisi be-Pro DG Systems. Ukuze uthole ulwazi olwengeziwe, thintana nesevisi yethu yezobuchwepheshe ku: sat@prodgsystems.com
Izesekeli
I-Pro DG Systems inikeza amakhasimende abo lonke uhlobo lwemishini nezinto ezisetshenziswayo zezinhlelo zabo.
I-GT 2X10 LA inekesi lendiza noma ibhodi likadoli kanye namakhava ezokuthutha ngaphezu kokuqedela ikhebula ukuze isistimu isilungele ukusetshenziswa. 
Ikesi lendiza lokuthutha amayunithi angu-4 I-GT 2X10 LA Ilinganiswe ngokuphelele ukuze ifakwe e-hermetic futhi ilungele ukuba semgwaqeni. 
Ibhodi likadoli namakhava okuthutha amayunithi angu-4 i-GT 2X10 LA Ilinganiswe kahle ukuze ithuthwe kunoma yiluphi uhlobo lweloli.
Ikhebula ephelele yesistimu iyatholakala futhi isilungele ukusetshenziswa.
Amadokhumenti / Izinsiza
 |
I-PRO DG GT 2X10 LA 2 Way Self Powered Line Array [pdf] Imaniwali yosebenzisayo I-GT 2X10 LA 2 Way Self Powered Line Array, GT 2X10 LA, 2 Way Self Powered Line Array, Powered Line Array, Line Array |