B AMAMITHA E-UK B-MIX38-IP Imojula Yokuphuma Kwengxubevange Enoxhumano Lwe-IP

Imininingwane Yomkhiqizo

• Ukunikezwa kwamandla: Okokufaka okujwayelekile
• Okokufaka kwedijithali: okokufaka okuthinta okomile okungu-12x, isibali se-pulse esinesivinini esiphezulu esingafika ku-100 Hz
• Okuphumayo kwe-analog: 6x 0-10 V DC okukhiphayo, ukulayisha okuphezulu kufika ku-20 mA isiteshi ngasinye, 60 mA umkhawulo ophelele womthwalo
• Okuphumayo kwedijithali: 12x okukhiphayo kwe-relay
• Isixhumi esibonakalayo: RS485, Modbus noma BACnet; I-Ethernet, i-Modbus TCP/IP noma i-BACnet IP
• Ikheli: Ihlelwe ngokushintsha ebangeni ukusuka ku-0 kuye ku-99
• I-Baudrate: Imiswe ngokushintsha ebangeni ukusuka ku-2400 ukuya ku-115200 bps
• Isilinganiso sokuvikelwa kokungena: IP40 – sokufakwa endlini
• Izinga lokushisa: 5 ukuya ku-95% RH (ngaphandle kokujiya)
• Izixhumi: RS485, Ethernet
• Ubukhulu: 160x110x62 mm (6.30×4.33×2.44 in)
• Ukukhweza: Ukukhweza ujantshi we-DIN (i-DIN EN 50022 evamile)
• Impahla yezindlu: Ipulasitiki, iPC/ABS ezicishayo

Imiyalo yokusetshenziswa komkhiqizo

Imihlahlandlela yokufaka

Sicela ufunde imiyalelo ngaphambi kokusebenzisa noma ukusebenzisa idivayisi. Uma unanoma yimiphi imibuzo, xhumana neThimba Losekelo le-iSMA CONTROLLI atsupport@ismacontrolli.com. Ukufakwa kukagesi kufanele kuhambisane namakhodi kazwelonke ezintambo kanye nemithetho yendawo.

Ukucatshangelwa kokunikezwa kwamandla
Qinisekisa uxhumo olufanele lokuphakelwa kwamandla ngokwezilinganiso ezishiwo ukuze ugweme noma yikuphi ukulimala kudivayisi.

Imiyalo yokuxhumana

• Voltage Isilinganiso: Xhuma kokokufaka kwendawo yonke
• Isilinganiso samanje: Xhuma kokokufaka kwendawo yonke
• Isikali Sokushisa: Xhuma kuma-universalinputs
• Okokufaka Othintana Naye Komile: Xhuma kokokufaka kwedijithali
• Imiphumela Yedijithali: Xhuma ukuze kuxhunywe imithwalo emelene ne-inductive
• Imiphumela ye-Analog: Xhuma ukuze uxhumeke ama-actuator

Ukusetha Ukuxhumana
Lungiselela ikheli le-interface kanye ne-baudrate ngokwezidingo zakho zokuxhumana okushelelayo.

Izincomo Zokulondolozwa
Hlola njalo noma yikuphi ukuxhumana okuxekethile noma izimpawu zokuguga. Gcina idivayisi ihlanzekile futhi ingenalo uthuli.

Imibuzo Evame Ukubuzwa (FAQ)

Q: Yini okufanele ngiyenze uma ngihlangabezana nekhodi yephutha kudivayisi?
A: Bheka kumanuwali yomsebenzisi ukuze uthole izincazelo zekhodi yephutha. Uma inkinga iqhubeka, xhumana Nethimba Losekelo le-iSMA CONTROLLI ukuze uthole usizo.

Umbuzo: Ngingakwazi ukusebenzisa le divayisi ngaphandle?
A: Cha, idivayisi ikalelwe ukufakwa endlini kuphela (ukuvikelwa kwe-IP40).

Q: Mangaki amadivaysi angaxhunywa ebhasini le-RS485?
A: Kungaxhunywa kumadivayisi angu-128 ebhasini le-RS485.

INKCAZO

Ukunikezwa kwamandla kagesi	I-DC: 24 V ± 20%, 7.4 W; I-AC: 24 V ± 20%, 11.1 VA
Okokufaka okujwayelekile	awu 8xtage, ukulinganisa kwamanje nokumelana, ukuthintana okomile
Okokufaka kwedijithali	Okokufaka okuthinta okomile okungu-12x, isibali seshayela esinesivinini esikhulu esingafika ku-100 Hz
Imiphumela ye-analog	6x 0-10 V DC okukhiphayo, umthamo omkhulu ofika ku-20 mA isiteshi ngasinye, 60 mA isamba esiphezulu somthwalo wemiphumela ye-analog
Imiphumela yedijithali	12x okukhiphayo kwe-relay	Izilinganiso eziphezulu	UL iyahambisana izilinganiso
	Ubukhulu bomthwalo obungazweli.	3 A @ 230 V AC 3 A @ 30 V DC	3 A @ 24 V AC 3 A @ 30 V DC
	Ubukhulu bomthwalo we-inductive.	75 VA @ 230 V AC 30 W @ 30 V DC	8 VA @ 24 V AC 30 W @ 30 V DC
Isixhumi esibonakalayo	RS485, Modbus noma BACnet, kuze kufike kumadivayisi ayi-128 ebhasini I-Ethernet, i-Modbus TCP/IP noma i-BACnet IP
Ikheli	Ihlelwe ngokushintsha ebangeni ukusuka ku-0 kuye ku-99
I-Baudrate	Setha ngokushintsha ebangeni ukusuka ku-2400 kuye ku-115200 bps
Isilinganiso sokuvikela sokungena	IP40 – yokufakwa endlini
Izinga lokushisa	Ukusebenza: -10°C ukuya +50°C (14°F kuya ku-122°F) Isitoreji: -40 ° C kuye + 85 ° C (-40 ° F kuye ku-185 ° F)
Umswakama ohlobene	5 kuya ku-95% RH (ngaphandle kokufingqa)
Izixhumi	Okuhlukanisekayo, ubuningi 2.5 mm2 (18 – 12 AWG)
Ubukhulu	160x110x62 mm (6.30 × 4.33 × 2.44 in)
Ukukhweza	Ukukhweza ujantshi we-DIN (i-DIN EN 50022 evamile)
Impahla yezindlu	Ipulasitiki, iPC/ABS ezicishayo

IPhaneli Eliphezulu

ISEXWAYISO

• Qaphela, izintambo ezingalungile zalo mkhiqizo zingawulimaza futhi ziholele kwezinye izingozi. Qiniseka ukuthi umkhiqizo ufakwe izintambo ngendlela efanele ngaphambi kokuvula amandla.
• Ngaphambi kokufaka izintambo, noma ukukhipha/ukukhweza umkhiqizo, qiniseka ukuthi UVALE amandla. Ukwehluleka ukwenza lokho kungase kubangele ukushaqeka kukagesi.
• Ungazithinti izingxenye ezishajwe ngogesi njengamatheminali kagesi. Ukwenza kanjalo kungase kubangele ukushaqeka kukagesi.
• Ungawuhlakazi umkhiqizo. Ukwenza kanjalo kungase kubangele ukushaqeka kukagesi noma ukusebenza kabi.
• Sebenzisa umkhiqizo ngaphakathi kwamabanga okusebenza anconyiwe ekucacisweni (izinga lokushisa, umswakama, voltage, ukushaqeka, ukukhuphuka, umkhathi njll.). Ukwehluleka ukwenza kanjalo kungase kubangele umlilo noma ukusebenza okungalungile.
• Qinisa izintambo ngokuqinile kutheminali. Ukungaqini okwanele kwezintambo kutheminali kungase kubangele umlilo.

AMATHEMINA EDIVAYISI

RS485 BIASING RESISTORS

UKUNIKEZWA KWAMANDLA KAGESI

I-TS EN 60730-1 IZINDABA ZOKUNIKEZELWA KWAMANDLA

• Ukuphepha kukagesi ezinhlelweni ezishintshayo zesakhiwo kanye nokulawula kusekelwe ekusetshenzisweni kwevolumu ephansi eyengeziwetage ehlukaniswe ngokuqinile nengxenye enkulu voltage. Le voltage i-SELV noma i-PELV ngokuya nge-EN 60730-1.
• Ukuvikela ngokumelene nokushaqeka kukagesi kuqinisekiswa yizinyathelo ezilandelayo:
  • umkhawulo we-voltage (ivolumu ephansitagUkunikezwa kwe-AC/DC 24V, kungaba i-SELV noma i-PELV)
  • Ukwehlukaniswa okuvikelekile kwesistimu ye-SELV kuwo wonke amasekhethi ngaphandle kwe-SELV ne-PELV
  • Ukwehlukaniswa okulula kwe-SELV-system kwezinye izinhlelo ze-SELV, ku-PELV-systems kanye nomhlaba.
• Imishini yasensimini njengezinzwa, abathintwayo besimo nama-actuator axhunywe ku-low-voltagOkokufaka kanye nokuphumayo kwamamojula e-I/O kufanele kuhambisane nezidingo ze-SELV noma i-PELV. Izixhumanisi zamathuluzi enkambu nezinye izinhlelo kumele futhi zenelise izidingo ze-SELV noma ze-PELV.
• Lapho ukuhlinzekwa kwamasekhethi e-SELV noma e-PELV kutholwa kumapayipi amakhulu evolumu ephezulutagizohlinzekwa yi-transformer yokuphepha noma isiguquli esidizayinelwe ukusebenza okuqhubekayo ukuhlinzeka ngamasekhethi e-SELV noma e-PELV.

IQINISO LOKUTHOBELA I-FCC

Qaphela: Lesi sisetshenziswa sihloliwe futhi satholwa ukuthi sithobela imikhawulo yedivayisi yedijithali Yekilasi B, ngokuvumelana nengxenye 15 Yemithetho ye-FCC. Le mikhawulo iklanyelwe ukuhlinzeka ngokuvikeleka okufanele ekuphazanyisweni okuyingozi ekufakweni kwendawo yokuhlala. Lesi sixhobo sikhiqiza, sisebenzise futhi singakhipha amandla efrikhwensi yomsakazo futhi, uma singafakiwe futhi sisetshenziswa ngokuhambisana nemiyalelo, singadala ukuphazamiseka okuyingozi ezokuxhumana ngomsakazo. Nokho, asikho isiqinisekiso sokuthi ukuphazamiseka ngeke kwenzeke ekufakweni okuthile. Uma lesi sisetshenziswa sidala ukuphazamiseka okuyingozi emsakazweni noma kumabonakude, okunganqunywa ngokucisha nokuvula okokusebenza, umsebenzisi uyakhuthazwa ukuthi azame ukulungisa ukuphazamiseka ngesinyathelo esisodwa noma ngaphezulu kwezilandelayo:

• Hlela kabusha noma hambisa uthi olwamukelayo.
• Khulisa ukuhlukana phakathi kwesisetshenziswa nomamukeli.
• Xhuma okokusebenza endaweni yokuphuma kuyisekethe ehlukile kuleyo lapho umamukeli axhumeke khona.
• Xhumana nomthengisi noma uchwepheshe werediyo/TV onesipiliyoni ukuze uthole usizo.

I-WIRING

• Izintambo zamandla kalayini kufanele zihanjiswe ngendlela ngokuhlukaniswa kwendawo kumakhebuli esignali nawokudluliswa kwedatha.
• Izintambo zesignali ye-analog nedijithali nazo kufanele zihlukaniswe.
• Kunconywa ukusebenzisa izintambo ezivikelekile zezimpawu ze-analog, izihlangu zekhebula akufanele ziphazanyiswe ama-terminals aphakathi.
• Isivikelo kufanele sifakwe emhlabathini ngqo ngemuva kokuthi ikhebula lingena ekhabhinethi.
• Kutuswa ukuthi kufakwe izicindezeli zokugxambukela lapho ushintsha imithwalo ye-inductive (isb. amakhoyili we-contactor, ama-relay, ama-solenoid valves). Ama-RC snubbers noma ama-varistors afanele i-AC voltage kanye nama-freewheeling diodes we-DC voltage imithwalo. Izakhi zokucindezela kufanele zixhunywe eduze kwekhoyili ngangokunokwenzeka.

UMHLAHLANDLELA WOKUFAKA

Sicela ufunde imiyalelo ngaphambi kokusebenzisa noma ukusebenzisa idivayisi. Uma unemibuzo ngemva kokufunda lo mbhalo, sicela uthinte Ithimba Losekelo le-iSMA CONTROLLI (support@ismacontrolli.com).

• Ngaphambi kokufaka izintambo noma ukukhipha/ukukhweza umkhiqizo, qiniseka ukuthi ucisha ugesi. Ukwehluleka ukwenza lokho kungase kubangele ukushaqeka kukagesi.
• Izintambo ezingalungile zomkhiqizo zingawulimaza futhi ziholele kwezinye izingozi. Qiniseka ukuthi umkhiqizo ufakwe izintambo ngendlela efanele ngaphambi kokuvula amandla.
• Ungazithinti izingxenye ezishajwe ngogesi njengamatheminali kagesi. Ukwenza kanjalo kungase kubangele ukushaqeka kukagesi.
• Ungawuhlakazi umkhiqizo. Ukwenza kanjalo kungase kubangele ukushaqeka kukagesi noma ukuhlinzwa okunephutha.
• Sebenzisa umkhiqizo kuphela ngaphakathi kwamabanga okusebenza anconyiwe esimisweni (izinga lokushisa, umswakama, voltage, ukushaqeka, isiqondiso esikhuphukayo, umkhathi, njll.). Ukwehluleka ukwenza kanjalo kungase kubangele umlilo noma ukuhlinzwa okunephutha.
• Qinisa izintambo kutheminali. Ukwehluleka ukwenza kanjalo kungase kubangele umlilo.
• Gwema ukufaka umkhiqizo eduze nezinsiza zikagesi ezinamandla amakhulu namakhebuli, imithwalo ye-inductive, nemishini yokushintsha. Ukuba seduze kwezinto ezinjalo kungase kubangele ukuphazamiseka okungalawuleki, okuholela ekusebenzeni okungazinzile komkhiqizo.
• Ukuhlelwa kahle kwamandla kanye ne-signal cabling kuthinta ukusebenza kwalo lonke uhlelo lokulawula. Gwema ukubeka amandla kanye nezintambo zesignali kumathreyi ekhebula ahambisanayo. Kungabangela ukuphazamiseka kumasignali agadwayo nokulawula.
• Kunconywa ukunika amandla izilawuli/amamojula nabahlinzeki bamandla be-AC/DC. Zihlinzeka ngokufakwa okungcono nezime kakhulu kumadivayisi uma kuqhathaniswa nezinhlelo zesiguquli se-AC/AC, ezidlulisa iziphazamiso nezimo zesikhashana njengokuhlinza nokuqhunyiswa kumadivayisi. Baphinde bahlukanise imikhiqizo ku-inductive phenomena kwamanye ama-transformer nemithwalo.
• Amasistimu wokuphakelwa kwamandla omkhiqizo kufanele avikelwe ngamadivayisi angaphandle abeka umkhawulo wokudlula ngokweqiletage kanye nemiphumela yokuphuma kombani.
• Gwema ukunika amandla umkhiqizo kanye nemishini yawo elawulwayo/egadiwe, ikakhulukazi amandla aphezulu kanye nemithwalo ye-inductive, kusukela kumthombo wamandla owodwa. Ukunika amandla amadivaysi avela kumthombo owodwa wamandla kubangela ingozi yokwethula ukuphazamiseka kusuka emithwalweni kuya kumadivayisi okulawula.
• Uma isiguquli se-AC/AC sisetshenziselwa ukunikeza amadivayisi okulawula, kutuswa ngokuqinile ukusebenzisa isiguquli esiphezulu esingu-100 VA Class 2 ukuze kugwenywe imiphumela engadingeki yokungenisa, eyingozi kumadivayisi.
• Imigqa emide yokuqapha nokulawula ingase ibangele izihibe ngokuphathelene nokunikezwa kwamandla okwabelwana ngawo, okubangela ukuphazamiseka ekusebenzeni kwamadivayisi, kuhlanganise nokuxhumana kwangaphandle. Kunconywa ukusebenzisa izihlukanisi ze-galvanic.
• Ukuze uvikele imigqa yesignali neyokuxhumana ekuphazamisekeni kozibuthe kagesi kwangaphandle, sebenzisa izintambo ezivikelwe kahle kanye nobuhlalu be-ferrite.
• Ukushintsha ama-relay okukhiphayo edijithali kwemithwalo emikhulu ye-inductive (edlule ukucaciswa) kungabangela ukuphazamiseka kugesi ofakwe ngaphakathi komkhiqizo. Ngakho-ke, kunconywa ukusebenzisa ama-relay / oxhumana nabo bangaphandle, njll ukushintsha imithwalo enjalo. Ukusetshenziswa kwezilawuli ezinokuphuma kwe-triac nakho kukhawulela ukuqhuma okufanayotage izenzakalo.
• Amacala amaningi okuphazamiseka nokugcwala ngokweqiletagama-e kumasistimu okulawula akhiqizwa ngokushintshwa, imithwalo ye-inductive ehlinzekwa yi-alternating mains voltage (AC 120/230 V). Uma bengenawo amasekhethi okunciphisa umsindo akhelwe ngaphakathi afanelekile, kuyanconywa ukusebenzisa amasekhethi angaphandle njengama-snubber, ama-varistors, noma ama-diode okuvikela ukuze ukhawulele le miphumela.

Ukufakwa kukagesi kwalo mkhiqizo kufanele kwenziwe ngokuhambisana namakhodi ezintambo kazwelonke futhi kuhambisane nemithetho yendawo.

Silandele ku: Kuxhunywe ku /bmetersuk

B MTERS UK  www.bmetersuk.com

Amadokhumenti / Izinsiza

B AMAMITHA E-UK B-MIX38-IP Imojula Yokuphuma Kwengxubevange Enoxhumano Lwe-IP [pdf] Incwadi Yeziqondiso B-MIX38-IP, B-MIX38-IP Mix Input Module enokuxhumana kwe-IP, B-MIX38-IP, Mix Input Module ne-IP Connectivity, Input Module enokuxhumana kwe-IP, Imojula Yokukhipha Nokuxhumana kwe-IP, Imojula enokuxhumana kwe-IP, Nokuxhumana kwe-IP, Ukuxhumana kwe-IP

Izithenjwa

• Imaniwali yosebenzisayo