AtomStack F03-0329-0AA1 Swift
Imininingwane
- Igama Lomkhiqizo: AtomStack Swift
- Inombolo Yemodeli: F03-0329-0AA1
- Inguqulo: B
- Okokufaka kwamandla: I-DC 24V
- Amachweba: Type-C Port (For PC Connection), Expansion Port (for Chuck, Roller, and Other Accessories)
- Inkomba Yesimo: Solid blue when working
Imiyalo yokusetshenziswa komkhiqizo
Uhlu Lwezingxenye:
- Ukuhlanganiswa kwe-X-axis
- Left Y-axis assembly (with motor)
- Right Y-axis assembly
- I-adaptha yamandla
- Llave fija (Fixed wrench)
Getting to Know AtomStack Swift:
Familiarise yourself with the different assemblies and parts of the AtomStack Swift, including the X-axis assembly, left and right Y-axis assemblies, power adapter, and optical shaft.
How to Install Swift:
- Place the five assemblies as shown in the diagram. Ensure the X-axis assembly belt faces downward, and the Y-axis assembly with the motor is on the left.
- Install the optical shaft onto the X-axis. Push the X-axis toward the front X-axis assembly with both hands, then tighten the coupling and timing pulley. Ensure it is fully inserted and aligned parallel with the front X-axis assembly.
- If the hand-tightened screw interferes with the optical axis, simply pull out the black part and rotate it downward again.
Uhlu Lwezingxenye
Getting to Know AtomStack Swift
How to install Swift
- Place the five assemblies as shown in the diagram.
Qaphela: The X-axis assembly should have the belt facing downward, and the Y-axis assembly with the motor should be on the left. - Align and connect the five assemblies, then secure them using six M5×8 screws.
- Install the optical shaft onto the X-axis. Push the X-axis toward the front X-axis assembly with both hands, then tighten the coupling and timing pulley.
(Ensure it is fully inserted and aligned parallel with the front X-axis assembly)
- Install the laser module and tighten the thumb knob.
Qaphela:
If the hand-tightened screw interferes with the optical axis, simply pull out the black part and rotate it downward again.
- Connect the motor cable, limit switch cables, and laser cable as shown in the diagram to complete the installation.
Indlela yokugxila:
Place the workpiece. Turn the focusing knob downward and loosen the thumb screw. Let the laser module drop until the knob touches the material. Tighten the screw to fix the module, then return the knob to its original position.
Ithiphu:
When placing the material, use the X/Y axis scale lines for alignment. When using “Absolute Coords” mode in the software, the design will align with the material’s position.
- If the engraving quality deteriorates after prolonged use, adjust the eccentric nuts with the open-end wrench to improve it.
- Use the open-end wrench to adjust the eccentric nuts on the left and right Y-axes.
- Adjust them so that when the machine is tilted at a 45° angle, as shown, the X-axis slides down slowly and evenly.
ATOMSTACK Official Recommended Software
Mobile App Download Method：
Indlela Yokulanda Isofthiwe Yekhompyutha:
Isixhumanisi sokulanda se-AtomStack Studio: https://atomstack.com/pages/atomstack-studio-software
- Official Download Link
https://atomstack.com/pages/atomstack-studio-software - Skena ukuze ulande
Izinsiza Zesoftware
I-LightBurn
Unofficial software. Requires a separate purchase
Indlela Yokulanda Isoftware ye-Lightburn: Isixhumanisi sokulanda: https://lightburnsoftware.com/pages/download-trial
- Scan to download the configuration file “AtomStack_Swift_Vxxx.lbdev”
- Vula isofthiwe ye-LightBurn, khetha: Amadivayisi - Ngenisa
-
Select “AtomStack_Swift_Vxxx.lbdev”, click “Open”, then “OK”. In the bottom right corner, select “AtomStack Swift”.
The machine will beep once to confirm the connection.
Qaphela: If adding the device manually, set the “Baud Rate” in “Device Settings” to 460800
Umhlahlandlela Womsebenzisi
Xhumana nathi
Scan the QR code for more information:
- Unboxing & First Use
- Use with the AtomStack APP
- Ukuxazulula inkinga
- Isondlo
Insizakalo yekhasimende:
- For the detailed warranty policy, please visit our official webindawo: www.atomstack.com
- Ngosizo lobuchwepheshe kanye nesevisi, sicela uthumele i-imeyili: support@atomstack.com
Umkhiqizi:
I-Shenzhen AtomStack Technologies Co., Ltd.
Ikhodi ye-ZIP: 518172
Ikheli:
17th Floor, Building 3A, Phase II, Intelligent Park, No. 76, Baohe Avenue, Baolong Street, Longgang District, Shenzhen, Guangdong, China.
Complies with 21 CFR 1040.10 and 1040.11 except for conformance with IEC60825-1 E, 3., as described in Laser Notice No.56, dated May 8, 2019.
FAQ
Yini okufanele ngiyenze uma ngihlangabezana nezinkinga phakathi nokufakwa?
If you face any difficulties during installation, refer to the video tutorial available on the official webisayithi noma uxhumane nokwesekwa kwamakhasimende ukuze uthole usizo.
Amadokhumenti / Izinsiza
 |
ATOMSTACK F03-0329-0AA1 AtomStack Swift [pdf] Imaniwali yosebenzisayo F03-0329-0AA1, A5 V3, F03-0329-0AA1 AtomStack Swift, F03-0329-0AA1, AtomStack Swift, Swift |