Isingeniso
This manual provides essential information for the safe and efficient operation and maintenance of your Maytronics Dolphin S200 Robotic Pool Cleaner. Please read it thoroughly before first use.
Image: The Maytronics Dolphin S200 Robotic Pool Cleaner, a compact and efficient device designed for automated pool cleaning.
Setha
Setting up your Dolphin S200 is a straightforward process, as no assembly is required.
- Ukuxhuma kwamandla: Plug the Dolphin S200 into a suitable power source. Ensure the power outlet is protected and appropriate for outdoor use.
- Placement in Pool: Carefully place the cleaner into the pool. Allow it to sink to the bottom.
- Initiate Cleaning: The cleaner is designed for automatic operation once powered on and submerged.
The unit operates on 24 Volts and is designed for ease of use with a touch control method.
Imiyalelo yokusebenza
The Dolphin S200 is designed for automated cleaning cycles. Once initiated, it will navigate and clean your pool surfaces efficiently.
- Ukusebenza okuzenzakalelayo: The robotic cleaner will automatically clean the pool floor and walls.
- Umjikelezo Wokuhlanza: Allow the cleaner to complete its full cleaning cycle for optimal results.
- Ukususwa: Once the cycle is complete, carefully remove the cleaner from the pool using its handle.
Isondlo
Regular maintenance ensures the longevity and optimal performance of your Dolphin S200.
- Ukuhlanza Isihlungi: After each cleaning cycle, remove the filter from the top of the unit and empty any collected debris.
- Ukuhlanza: Rinse the filter thoroughly with a hose to remove fine particles before the next use.
- Isitoreji: Store the device in a cool, dry place when not in use to protect its components.
- Hlola ngaphambilini: Before and after each use, visually inspect the cleaner for any signs of damage or wear.
Ukuxazulula inkinga
This section provides guidance for common issues you might encounter.
| Inkinga | Imbangela Engenzeka | Isixazululo |
|---|---|---|
| Cleaner not moving | Power supply issue, tangled cable, debris in brushes. | Check power connection, untangle cable, clean brushes. |
| Ukusebenza kabi kokuhlanza | Full or dirty filter, worn brushes. | Clean or replace filter, inspect and replace brushes if necessary. |
| Isihlanzi esintantayo | Air trapped inside, insufficient water saturation. | Submerge cleaner fully and gently shake to release trapped air. |
Imininingwane
| Isici | Imininingwane |
|---|---|
| Ibhrendi | MAYTRONICS |
| Igama Lemodeli | DOLPHIN S200 IG |
| Inombolo Yemodeli Yento | DOLPHIN S200 IG |
| ASIN | B08C1B23FD |
| I-UPC | 724131497941 |
| Kudingeka Umhlangano | Cha |
| Indlela Yokulawula | Thinta |
| Voltage | 24 volts |
| Ukusebenza kahle | Ukonga amandla |
| Uhlobo Lokufaka | Irobhothi |
| Okubalulekile | ABS (Acrylonitrile Butadiene Styrene), Plastic |
| Umthombo wamandla | Isebenza Ibhethri |
| Isici Esikhethekile | Engasindi |
| Isisindo sento | 17 amakhilogremu |
| Ubukhulu bephakheji | 22 x 18 x 14 amayintshi |
Ulwazi Lwewaranti
The Maytronics Dolphin S200 Robotic Pool Cleaner comes with a Iwaranti Enomkhawuko. For specific terms and conditions, please refer to the warranty card included with your product or contact Maytronics customer service.
Ukwesekwa Kwamakhasimende
For further assistance, technical support, or spare parts, please contact Maytronics customer service. Refer to the product packaging or the official Maytronics website ngemininingwane yokuxhumana.
Ungavakashela futhi ikhasi lomkhiqizo ku-Amazon for additional information and customer reviews.
