Cudy LT300 4G LTE Wi-Fi Router User Manual

1. Isingeniso

The Cudy LT300 is a 4G LTE Wi-Fi Router designed to provide high-speed internet access using a cellular SIM card. It supports LTE download speeds of up to 150 Mbps and Wi-Fi speeds of up to 300 Mbps. This manual provides instructions for setting up, configuring, and maintaining your LT300 router.

2. Okuqukethwe Kwephakheji

Please check the package contents carefully. If any item is missing or damaged, contact your retailer.

• Cudy LT300 4G LTE Wi-Fi Router
• I-adaptha yamandla
• Ikhebula le-Ethernet
• Detachable LTE Antennas (x2)
• SIM Card Adapters (Nano to Micro, Nano to Standard)
• Umhlahlandlela Wokufaka Ngokushesha

3. Umkhiqizo Uphelileview

3.1. Izingxenye ze-Hardware

Familiarize yourself with the ports, buttons, and LED indicators on your Cudy LT300 router.

Umfanekiso 1: Ngaphambili view of the Cudy LT300 router, showing the power, Wi-Fi, LTE signal, and LAN/WAN LED indicators.

• I-LED yamandla: Ikhombisa isimo samandla.
• I-Wi-Fi LED: Indicates Wi-Fi status.
• LTE Signal LEDs: Indicate 4G LTE signal strength.
• LAN/WAN LEDs: Indicate Ethernet port activity.

Umfanekiso 2: Ngemuva view of the Cudy LT300 router, displaying the power port, LAN/WAN ports, SIM card slot, and WPS/Reset button.

• Imbobo yamandla: Xhuma i-adaptha yamandla efakiwe.
• LAN/WAN Ports: Gigabit Ethernet ports for wired connections. One port can function as WAN for wired internet.
• Isikhala sekhadi le-SIM: Faka ikhadi lakho le-SIM le-4G LTE lapha.
• I-WPS/Inkinobho Yokusetha Kabusha: Press for WPS function. Press and hold for 5-8 seconds to factory reset.
• Izixhumi ze-Antenna: Connect the detachable LTE antennas.

4. Setha

4.1. Install LTE Antennas

Screw the two detachable LTE antennas into the connectors on the rear panel of the router. Ensure they are securely tightened and oriented vertically for optimal signal reception.

4.2. Faka i-SIM Card

The Cudy LT300 uses a standard-sized SIM card. If your SIM card is Nano or Micro, use the provided SIM card adapters to fit it into the standard slot.

1. Qinisekisa ukuthi irutha ivaliwe.
2. Thola isikhala sekhadi le-SIM kuphaneli yangemuva.
3. Insert the SIM card into the slot with the metal contacts facing down and the notched corner oriented correctly, as indicated on the router. Push until it clicks into place.
4. If removing, gently push the SIM card in again until it springs out.

Umfanekiso 3: Illustration of inserting a SIM card into the Cudy LT300 router's SIM card slot.

4.3. Vula amandla

Connect the power adapter to the router's power port and then plug the other end into a power outlet. The Power LED will illuminate, and the router will begin to boot up. This process may take approximately 30-60 seconds.

5. Ukucushwa

5.1. Ukufinyelela ku- Web Isizinda Sokuphatha

To configure your router, you need to access its web-based management interface.

1. Connect your computer to the router via Wi-Fi (SSID and password are on the label at the bottom of the router) or an Ethernet cable.
2. Vula a web isiphequluli (isb, Chrome, Firefox, Edge).
3. Thayipha ikheli le-IP elizenzakalelayo 192.168.10.1 kubha yekheli bese ucindezela u-Enter.
4. Enter the default login credentials. The default username is admin futhi iphasiwedi ezenzakalelayo ithi admin (or as printed on the router label).
5. Follow the on-screen instructions for the initial setup wizard, if prompted. It is recommended to change the default login password for security.

5.2. Basic Wi-Fi Settings

Navigate to the "Wireless" or "Wi-Fi Settings" section in the web interface to customize your wireless network.

• I-SSID (Igama Lenethiwekhi): Change the default Wi-Fi network name to a unique name.
• Password (Security Key): Set a strong, secure password for your Wi-Fi network. WPA2-PSK AES is recommended.
• Imodi yokuphepha: Select WPA2-PSK.

5.3. LTE/Internet Settings

The router should automatically detect your SIM card and configure the LTE connection. If not, you may need to manually configure the APN (Access Point Name) settings provided by your mobile operator.

1. Go to the "Network" or "LTE Settings" section.
2. Check the connection status. If "Disconnected" or "Limited," verify APN settings.
3. Select "Manual" APN configuration if automatic fails and enter the correct APN, username, and password from your mobile operator.
4. Save changes and reboot the router if prompted.

5.4. VoLTE Configuration

The Cudy LT300 supports VoLTE functionality. If your SIM card and mobile operator support VoLTE, you may find settings under "Voice" or "VoLTE" in the web interface to enable or configure this feature. Consult your mobile operator for specific VoLTE settings if required.

6. Ukusebenza

6.1. Ukuxhuma Amadivayisi

• I-Wi-Fi: On your device (smartphone, tablet, laptop), search for the Wi-Fi network name (SSID) you configured and enter the Wi-Fi password.
• I-Ethernet: Connect an Ethernet cable from a LAN port on the router to the Ethernet port on your computer or other wired device.

6.2. Izinkomba ze-LED

Monitor the LED indicators on the front panel to understand the router's status:

• I-LED yamandla: Solid Green (On), Off (Off).
• I-Wi-Fi LED: Solid Green (Wi-Fi On), Blinking (Data Transfer), Off (Wi-Fi Off).
• LTE Signal LEDs: Indicate signal strength (e.g., 3 bars for strong, 1 bar for weak).
• LAN/WAN LEDs: Solid Green (Connected), Blinking (Data Transfer), Off (No Connection).

7. Isondlo

7.1. I-Firmware Update

Regularly check for and install firmware updates to ensure optimal performance and security. Firmware files can usually be downloaded from the Cudy official webindawo.

1. Landa i-firmware yakamuva file for your LT300 model.
2. Finyelela ku- web ukuphathwa interface.
3. Navigate to "System Tools" or "Firmware Upgrade."
4. Layisha i-firmware elandiwe file and follow the on-screen instructions. Do not power off the router during the upgrade process.

7.2. Ukusetha kabusha kwasefekthri

A factory reset will restore the router to its default settings. This can be useful for troubleshooting or if you forget your login password.

• With the router powered on, press and hold the WPS/Reset button on the rear panel for 5-8 seconds until the LEDs flash.
• Release the button. The router will reboot with factory default settings.

8. Ukuxazulula izinkinga

• Alukho Uxhumo Lwe-inthanethi:
  • Check if the SIM card is inserted correctly and activated.
  • Verify LTE signal strength via the LED indicators.
  • Ensure APN settings are correct in the web esibonakalayo.
  • Qala kabusha i-router namadivayisi akho axhunyiwe.
• Ayikwazi Ukufinyelela Web Isixhumi esibonakalayo sokuphatha:
  • Ensure your device is connected to the router's Wi-Fi or via Ethernet.
  • Verify the IP address 192.168.10.1 is typed correctly.
  • Zama okuhlukile web isiphequluli.
  • Perform a factory reset if you forgot the login password.
• Isivinini se-Wi-Fi esinensayo:
  • Check LTE signal strength; a weak signal will affect overall speed.
  • Qinisekisa ukuthi i-router ibekwe endaweni ephakathi, kude nezithiyo kanye nokuphazamiseka.
  • Nciphisa inani lamadivayisi axhunyiwe noma imisebenzi edinga i-bandwidth eningi.
  • Consider changing the Wi-Fi channel in the web esibonakalayo.

9. Imininingwane

10. Ulwazi Lokuphepha

• Do not expose the device to water or humidity.
• Ungazami ukuqaqa noma ukulungisa idivayisi ngokwakho.
• Sebenzisa kuphela i-adaptha yamandla enikeziwe.
• Gcina idivayisi ikude nemithombo yokushisa kanye nokukhanya kwelanga okuqondile.
• Qinisekisa ukuthi kungena umoya ofanele eduze kocingo.

11. Iwaranti kanye Nokusekela

For warranty information and technical support, please refer to the warranty card included in the package or visit the official Cudy website. Support resources typically include FAQs, firmware downloads, and contact information.