Pic Solution Veo Premium Digital Thermometer User Manual

1. Isingeniso

Thank you for choosing the Pic Solution Veo Premium Digital Thermometer. This device is designed for accurate and rapid measurement of human body temperature. Its flexible probe and clear, color-coded display make it easy and comfortable to use for all ages. Please read this manual carefully before use and keep it for future reference.

2. Ulwazi Lokuphepha

• This thermometer is intended for measuring human body temperature only. Do not use it for other purposes.
• Ungazami ukuqaqa noma ukulungisa idivayisi.
• Keep the thermometer out of reach of children and pets.
• Avoid exposing the thermometer to direct sunlight, high temperatures, or extreme humidity.
• Clean the thermometer before and after each use as described in the 'Maintenance and Cleaning' section.
• Musa ukuluma uphenyo.
• If the device malfunctions or displays an error, refer to the 'Troubleshooting' section or contact customer support.

3. Umkhiqizo Uphelileview

The Pic Solution Veo Premium Digital Thermometer features a user-friendly design with a flexible probe for comfort and a large, easy-to-read display.

Isithombe 3.1: Ngaphambili view of the Pic Solution Veo Premium Digital Thermometer, showing the display, power button, and flexible probe.

Isithombe 3.2: Illustration highlighting the flexible probe of the thermometer, designed for comfortable use.

Izingxenye:

• Flexible Probe: The part that comes into contact with the body for temperature measurement.
• Isikrini sokubonisa: Shows temperature readings and indicators. Features color-coded backlighting (green for normal, red for fever).
• Inkinobho yamandla: Used to turn the thermometer on and off.
• Igumbi Lebhethri: Located at the end opposite the probe, houses the battery.

4. Setha

4.1. Ukufakwa kwebhethri

The thermometer comes with a battery pre-installed. If the battery needs replacement, follow these steps:

1. Gently slide open the battery compartment cover located at the end of the thermometer.
2. Remove the old battery (type CR1632 3V).
3. Insert a new CR1632 3V lithium-ion battery with the positive (+) side facing up.
4. Vala ikhava yengxenye yebhethri ngokuphephile.

4.2. Ukuhlanza Kwasekuqaleni

Before first use, and after each subsequent use, clean the thermometer as described in the 'Maintenance and Cleaning' section.

5. Iziqondiso Zokusebenza

5.1. Ukuvula/Ukuvala

• Ukuze Uvule: Press the power button. The display will briefly show all segments, then the last measured temperature, and finally 'Lo' with a flashing '°C' or '°F' indicating it's ready for measurement.
• Ukucisha: Press and hold the power button until the display turns off, or the device will automatically shut off after approximately 10 minutes of inactivity to conserve battery life.

5.2. Taking a Temperature Measurement

1. Ensure the thermometer is clean and disinfected.
2. Cindezela inkinobho yamandla ukuze uvule ithemometha.
3. Place the flexible probe in the desired measurement location:
• Ukusetshenziswa Komlomo: Place the probe tip under the tongue, as close as possible to the heat pocket. Keep the mouth closed.
• Axillary (Underarm) Use: Place the probe tip in the center of the armpit. Ensure the arm is pressed firmly against the body to hold the probe in place.
4. Hold the thermometer steady until a series of beeps indicates the measurement is complete. The display will show the peak temperature.
5. Funda izinga lokushisa elivezwe esikrinini.
6. Turn off the thermometer and clean it after use.

5.3. Ukuqonda Isibonisi

The Veo Premium Digital Thermometer features a color-coded display for quick interpretation of temperature readings:

Isithombe 5.1: Display showing a normal temperature (e.g., 36.5°C) with a green backlight, indicating no fever.

• Isibani Sangemuva Esiluhlaza: Indicates a normal body temperature (typically below 37.5°C / 99.5°F).

Isithombe 5.2: Display showing an elevated temperature (e.g., 38.0°C) with a red backlight, indicating a fever.

• Red Backlight: Indicates an elevated body temperature or fever (typically 37.5°C / 99.5°F or higher). The thermometer will also emit a distinct alarm sound when a fever is detected.

5.4. Umsebenzi Wememori

The thermometer automatically stores the last temperature measurement. To recall the last reading, press the power button briefly when the device is off. The last reading will be displayed for a few seconds before the thermometer enters measurement mode.

6. Ukunakekela kanye Nokuhlanza

Proper maintenance and cleaning ensure the accuracy and longevity of your thermometer.

• Ukuhlanza: After each use, wipe the probe with a soft cloth moistened with 70% isopropyl alcohol or cold soapy water. Do not immerse the entire thermometer in water.
• Ukubulala amagciwane: For thorough disinfection, wipe the probe with an alcohol swab.
• Isitoreji: Store the thermometer in its transparent case in a cool, dry place, away from direct sunlight and extreme temperatures.
• Ukushintshwa Kwebhethri: Replace the battery when the low battery indicator appears on the display. Refer to section 4.1 for instructions.

7. Ukuxazulula izinkinga

8. Imininingwane

9. Iwaranti kanye Nokusekela

For warranty information or technical support, please contact the manufacturer:

Umkhiqizi: PROMEDICA S.p.A.
Ikheli: Via Artigiani, 10, 24060 Telgate (BG), Italy
Webindawo: www.picsolution.com

Please have your model number (02023006000000) and purchase details available when contacting support.

10. Ukulahlwa

This product contains a battery and electronic components. Do not dispose of the device or its battery with general household waste. Please follow local regulations for the disposal of electronic waste and batteries to protect the environment.

Isithombe 10.1: Back of the product packaging, displaying environmental disposal symbols and manufacturer details. The barcode 8058090004349 is visible.