Philips myLiving PONGEE LED Spot Light (Model 5058131PN) User Manual

1. Isingeniso

This manual provides essential information for the safe and effective installation, operation, and maintenance of your Philips myLiving PONGEE LED Spot Light, Model 5058131PN. Please read these instructions carefully before installation and retain them for future reference.

Philips myLiving PONGEE white LED Spot Light, angled view

Figure 1: Philips myLiving PONGEE LED Spot Light

The Philips myLiving PONGEE spot light is designed for indoor use in functional spaces such as bedrooms or living rooms. Its swivel head allows for adjustable light direction, providing illumination precisely where needed.

2. Ulwazi Lokuphepha

Ngaso sonke isikhathi qaphela lezi zinyathelo zokuphepha ezilandelayo ukuze uvimbele ukulimala noma ukulimala:

Ukuphepha Kagesi: Installation must be performed by a qualified electrician in accordance with local wiring regulations. Always disconnect power at the main fuse or circuit breaker before installation, maintenance, or bulb replacement.
Ukusetshenziswa Kwangaphakathi Kuphela: This product has an IP20 rating, meaning it is protected against solid objects larger than 12.5mm but has no protection against water. Do not install in bathrooms or other areas where it may be exposed to moisture.
Uhlobo Lwebhabhu: Use only GU10 LED bulbs as specified. Do not exceed the maximum wattage ekhonjisiwe kumdlalo.
Ukuphatha: Do not touch the bulb immediately after use as it may be hot. Allow it to cool before handling.
Ukuhlanza: Clean the fixture with a soft, dry cloth. Do not use abrasive cleaners or solvents.

3. Okuqukethwe Kwephakheji

Qinisekisa ukuthi zonke izingxenye zikhona ngaphambi kokuqala ukufakwa:

Philips myLiving PONGEE LED Spot Light fixture (1 unit)
Ihadiwe yokuyifaka (izikulufo, amapulagi odonga)
Incwadi yeziqondiso

Qaphela: A GU10 LED bulb is akufakiwe futhi kufanele ithengwe ngokuhlukana.

Packaging box for Philips myLiving PONGEE LED Spot Light

Umfanekiso 2: Ukupakishwa Komkhiqizo

4. Ukusetha nokufakwa

This spot light is designed for surface mounting on ceilings or walls. Refer to the dimensions diagram for planning your installation.

Dimensional drawing of Philips myLiving PONGEE LED Spot Light showing measurements in millimeters

Figure 3: Product Dimensions (all measurements in mm)

Lungiselela Indawo Yokufaka: Ensure the mounting surface is clean, dry, and structurally sound. Mark the desired mounting points based on the fixture's base.
Nqamula Amandla: Before starting any electrical work, turn off the power supply to the circuit at the main fuse box or circuit breaker.
Mount the Base: Secure the fixture's mounting base to the ceiling or wall using the provided screws and wall plugs. Ensure it is firmly attached.
Intambo yokulungisa: Connect the electrical wires from the ceiling/wall to the fixture's terminals. Follow the standard wiring color codes (e.g., Live to Live, Neutral to Neutral, Earth to Earth). Ensure all connections are secure.
Faka I-bulb: Insert a GU10 LED bulb (not included) into the socket by aligning the pins and twisting clockwise until secure.
Attach the Fixture Body: Secure the main body of the spot light to the mounted base.
Buyisela Amandla: Once installation is complete and all connections are checked, restore power at the main fuse box or circuit breaker.

5. Iziqondiso Zokusebenza

The Philips myLiving PONGEE LED Spot Light is operated via a standard wall switch connected to its electrical circuit.

Ukuvula/Ukuvala: Flip the wall switch to the 'ON' position to illuminate the spot light. Flip it to the 'OFF' position to turn it off.
Ukulungisa isikhombisi-ndlela sokukhanya: The spot light features a swivel head. Gently adjust the light head to direct the beam to your desired area. Avoid excessive force when adjusting.

6. Isondlo

Ukuhlanza: Ensure the power is off and the fixture is cool before cleaning. Wipe the exterior with a soft, dry, lint-free cloth. Do not use liquid cleaners, aerosols, or abrasive materials.
Ukushintshwa kwe-Bulb:
1. Vala ukunikezwa kwamandla ku-circuit breaker.
2. Allow the bulb to cool completely.
3. Gently twist the old GU10 bulb counter-clockwise to remove it from the socket.
4. Insert a new GU10 LED bulb by aligning the pins and twisting clockwise until secure.
5. Buyisela amandla.

7. Ukuxazulula izinkinga

Inkinga	Imbangela Engenzeka	Isixazululo
Ukukhanya akukhanyi.	Akukho ukunikezwa kwamandla. Ibhalbhu inephutha noma ayifakwanga kahle. Ukuxhumeka kwezintambo okuxekethile.	Hlola i-circuit breaker noma i-fuse. Ensure the wall switch is ON. Replace the bulb with a new GU10 LED bulb. Xhumana nochwepheshe kagesi ukuze uhlole ukuxhumeka kwezintambo.
Ukucwayiza okukhanyayo.	Ukuxhumeka kwebhalbhu okuxegayo. Iswishi ye-dimmer engahambelani (uma ikhona). I-bulb engalungile.	Ensure the bulb is securely twisted into the socket. If using a dimmer, ensure it is compatible with LED bulbs. Shintsha isibani.

8. Imininingwane

Ibhrendi: I-Philips Lighting
Inombolo Yemodeli: I-5058131PN
Ubukhulu bomkhiqizo (L x W x H): 10 x 13.8 x 8.2 cm
Isisindo Sento: awu 345g
Okubalulekile: Insimbi
Umbala: Emhlophe
Isitayela: Okwesimanje
Uhlobo Lomthombo Wokukhanya: I-LED
Bulb Socket Type: GU10
Inombolo Yama-bulb: 1 (bulb not included)
Okokufaka Voltage: Ama-Volts angama-220-240
Umthombo wamandla: Electrical cable (wired)
Uhlobo Lokufaka: Surface Mount (Ceiling/Wall)
Isilinganiso se-IP: IP20 (Ukusetshenziswa kwasendlini kuphela)
Izici ezikhethekile: Energy-efficient, Swivel head
Ukusetshenziswa Okuthize: Home, Bedroom, Living Room

9. Iwaranti kanye Nokusekela

Ukuze uthole ulwazi lwewaranti kanye nokusekelwa kwamakhasimende, sicela ubheke ikhadi lewaranti elifakwe nomkhiqizo wakho noma uvakashele i-Philips Lighting esemthethweni. webindawo. Ungaxhumana nomthengisi wakho ukuze uthole usizo.

Gcina ubufakazi bakho bokuthenga banoma yiziphi izimangalo zewaranti.

	I-Philips RoadForce BRP481 LED60 NW 33W DWL P7 0-10: Ishidi ledatha le-LED Luminaire elinamandla aphezulu Ishidi ledatha lobuchwepheshe le-Philips RoadForce BRP481 LED60 NW 33W DWL P7 0-10, isibani se-LED esisebenza kahle kakhulu esinezici ezithuthukisiwe, imininingwane, kanye nedatha yohlelo lokusebenza. Kufaka phakathi ukusebenza, imininingwane yemishini, kanye nekagesi.
	I-Philips TubePoint: Ububanzi Bokukhanya Okuphezulu Kwemigwaqo Yethrafikhi Hlola ububanzi bezibani ze-Philips TubePoint, ezenzelwe izixazululo zokukhanyisa ezisebenza kahle, ezingabizi kakhulu, nezithembekile emihubheni yethrafikhi. Imininingwane yale ncwajana yomndeni womkhiqizo ifaka, izinzuzo, imininingwane yobuchwepheshe, kanye nokuhlukahluka kwamamodeli okukhanyisa okungcono kakhulu kwemihubhe.
	Incwadi Yeziqondiso Zekhwalithi Yokukhanyisa yePhilips Le Ncwadi Yekhwalithi ichaza i-Philips Lighting Quality System, ichaza izinqubo zayo, amazinga, kanye nokuzibophezela kwayo kwikhwalithi. Isebenza njengesengezo ku-Philips Lighting Business System, iqinisekisa ukuthi imikhiqizo nezinsizakalo ziyahlangabezana nezidingo ze-ISO 9001 kanye nokulindelwe ngamakhasimende.
	Izibani ze-LED ezifakwe odongeni ze-Philips CoreLine Thola isibani se-LED esifakwe odongeni se-Philips CoreLine, isisombululo sokukhanyisa esisha, esilula ukusisebenzisa, nesisezingeni eliphezulu sezinhlelo zokusebenza ezahlukahlukene njengemihubhe, izitebhisi, kanye neminyango yomphakathi. Le ncwajana ichaza izici zayo, izinzuzo, imininingwane yobuchwepheshe, kanye nolwazi lomkhiqizo.
	Philips OccuSwitch LRM1070/00 PIR Anwesenheitssensor Datenblatt Datenblatt für den intelligenten Philips OccuSwitch LRM1070/00 Anwesenheitssensor. I-Bietet PIR-Technologie, tageslichtabhängige Schaltung, integriertes Relais und Deckeneinbau. I-Enthält technische Spezifikationen no-Abmessungen.
	Isitholi Sokunyakaza sePhilips OccuSwitch LRM1070/00 kanye neSwitch Yokukhanya Thola i-Philips OccuSwitch LRM1070/00, i-motion detector ehlakaniphile eneswishi ehlanganisiwe eyenzelwe ukonga amandla ngokucima ngokuzenzakalelayo izibani emakamelweni angenamuntu. Ilungele izindawo ezifika ku-25 m², iphatha imithwalo efika ku-6A futhi ifaka ukufakwa okulula ngesixhumi esisuswayo.

Philips Lighting 5058131PN