INGABE YS-RFID2 ID Ikhadi le-serial Port Reader Module

UKUCHAZWA KOMKHIQIZO

• Igama: Imojula yesifundi sembobo yekhadi le-ID
• Imodeli: YS-RFID2
• Ukucaciswa: 5×2.9×0.5cm
• Ukunikezwa kwevoltage: I-DC 5V
• Ukusebenza kwamanje: 26ma
• Isixhumi esibonakalayo: Imbobo yomkhiqizo engu-1 ye-TTL, imbobo yokuphuma engu-1
• Okwamanje ngemva kokuzwa ikhadi: 20ma
• Itheminali yokuphumayo voltage: cishe i-4.3V (uma ukunikezwa kwamandla okungu-5V)
• Izinga lokushisa lokusebenza: -20 ℃ kuya ku-70 ℃
• Umgomo wokusebenza: Ngemva kokuba imojula izwa ikhadi le-ID, ikhipha amakhodi futhi ikhiphe inombolo yekhadi enezinombolo eziyi-10. Okwesiboneloample, imbobo ye-IO yekhadi elibhalisiwe nayo ikhipha izinga eliphezulu.

Incazelo yomsebenzi womkhiqizo

1. Ikhadi le-ID yokufunda, ikhadi lokufinyelela le-ID, inombolo yekhadi le-ID ye-VIP keychain, i-chip ye-125K yokusekela i-TK4100.
2. Sekela imbobo ye-serial engu-1 ye-TTL ukuze ukhiphe idatha ekhishwe ikhodi.
3. Sekela imbobo yokuphuma engu-1, engalawula ngokuqondile ukushintshwa kwemojula edluliselwe.
4. Sekela ama-baud rates angu-4 ozikhethela wona, 4800, 9600, 57600, 115200bps.
5. Sekela imisebenzi efana nokufunda, ukususa, nokubhalisa amakhadi.
6. Isamba sezinombolo zamakhadi angu-0-34 angagcinwa, kanye nesamba samakhadi omazisi angama-35.

Incazelo yephrothokholi yokuxhumana kwe-serial

• Indlela yokuqopha ikhadi le-ID:
  Ikhadi le-ID lizokhishwa ikhodi futhi likhishwe ngokushesha ngemva kokuba selisondele, futhi imbobo ye-serial izokhipha inombolo yekhadi kanye. Ifomethi yezinhlamvu ithi: "inombolo yekhadi: xxxxxxxxxx@" (inombolo yekhadi inombolo yekhadi enezinombolo eziyi-10 ekhadini langempela le-ID)
• Umsebenzi we-serial port susa futhi ubhalise indlela yekhadi
  • Susa wonke amakhadi, i-serial port ethola ifomethi yezinhlamvu ithi: "Susa ikhadi: konke@" —— phendula "Susa konke kuqediwe"
  • Ukususa ikhadi, ifomethi yezinhlamvu zembobo etholwayo ithi: "Susa ikhadi: ikhadi 00@" Impendulo eyodwa "Ukususa ikhadi 0 kuqediwe"
  • Lapho ubhalisa ikhadi elithile, ifomethi yezinhlamvu zembobo etholwayo ithi: “Ikhadi Lokubhalisa: Ikhadi 00@” ——Phendula “Qala Ukubhalisa Ikhadi”, isibani senkomba silokhu sibaneka futhi silinde ukuba ikhadi lisondele, ngemva kokuqedwa kokubhaliswa —— Phendula “Ukubhalisa Kuqediwe” (Uma ikhadi 1 linekhadi, lizocishwa)
  • Buza wonke amakhadi, ifomethi yezinhlamvu zembobo etholwayo ithi: “Ikhadi lombuzo: konke ——Ifomethi yokuphendula zonke izinombolo zamakhadi ithi:
    Inombolo yekhadi 0: XXXXXXXXXXXXX@
    Inombolo yekhadi 2: xxxxxxxxx@
• Indlela yokusetha ye-serial port baud rate:
  • Ifomethi yokwamukela imbobo ye-serial ithi: "Setha isilinganiso se-baud: xxxx@"
    Izinga le-Baud: 4800, 9600, 57600, 115200
    Uma ufuna ukusetha izinga le-baud libe ngu-9600, thumela: "Setha isilinganiso se-baud: 96000"

Qaphela: Ukubhaliswa kungabhaliswa kuphela ngokuya nge-oda. Uma inombolo ye-serial ibhalisiwe, ingaphinda ibhaliswe. Uma inombolo ye-serial ingabhalisiwe, ukubhaliswa kuzohlelwa ngokuvumelana ne-oda, futhi ukubhaliswa akukwazi ukweqiwa. Kuyafana nokususa. Uma kukhona amakhadi ayi-10, uma ususa ikhadi lokuqala, sekusele amakhadi ayi-9, bese kuthi elokuqala elingu-2 libe ikhadi 1.
Exampukusetshenziswa kwezindlela zokusebenza

Sebenzisa ngekhompyutha

1. Xhuma i-USB ku-TTL kumojula yesifundi sekhadi le-ID bese uyixhume kukhompyutha
2. Vula "RFID2 Module Setting Software", khetha imbobo ye-COM ehambisanayo bese uvula imbobo ye-serial
3. Ngalesi sikhathi, ungakwazi ukwengeza amakhadi okubhalisa futhi ususe amakhadi ngokuvumelana nezidingo zakho.

Sebenzisa nge-MCU

1. Okokuqala bhala uhlelo lwephrothokholi yokuxhumana ye-serial ye-MCU ehambisana nemojula yokufunda ikhadi le-ID. Okwesiboneloampi-single-chip microcomputer ingathumela ikhadi lerejista, isuse umyalo wokukhanya kwekhadi kumojuli yokufunda ikhadi le-ID, futhi ingathola imbobo ye-serial ukuze inqume inombolo yekhadi yamanje kanye nokunye ukusebenza. (Ingahlanganiswa nomsizi wembobo ye-serial ukuze kulungiswe iphutha)
2. Xhuma i-microcomputer ye-single-chip kanye nemojula yesifundi sekhadi le-ID, bese ungakwazi ukusebenzisa imbobo ye-serial yokuthumela nokwamukela imiyalo ngokuya ngesimo se-single-chip microcomputer.
   Uma i-microcontroller irekhoda inombolo yekhadi le-ID kuqala, ngokuzayo lapho ikhadi le-ID lizwakala futhi, i-microcontroller izonquma ukuthi inombolo yekhadi erekhodiwe njengamanje, futhi uma kunjalo, yenza imisebenzi efanele. (Njengokubona kwe-single-chip microcomputer ukuvula umnyango nokukhanyisa izibani, njll.)

Amadokhumenti / Izinsiza

INGABE YS-RFID2 ID Ikhadi le-serial Port Reader Module [pdf] Iziyalezo I-YS-RFID2 ID yekhadi le-Serial Port Reader Module, YS-RFID2, I-ID Card Serial Port Reader Module, ID Card Serial, Port Reader Module, Port Module, Reader Module, Module, YS-RFID2 Module

Izithenjwa

• Imaniwali yosebenzisayo