I-Aeotec TriSensor.
I-Aeotec TriSensor yasungulwa ukuze ibambe futhi idlulise amanani ezemvelo nokunyakaza nge I-Z-Wave Plus. Inikwa amandla ngabakwa-Aeotec IGen5 ubuchwepheshe. Ungathola okuningi mayelana I-TriSensor ngokulandela leso sixhumanisi.
Ukubona ukuthi ngabe i-TriSensor yaziwa ukuthi iyahambisana nohlelo lwakho lwe-Z-Wave noma cha, sicela ubheke eyethu Ukuqhathaniswa kwesango le-Z-Wave ukufakwa kuhlu. I- Ukucaciswa kobuchwepheshe kweTriSensor kungaba njalo viewed kuleso sixhumanisi.
Yazi i-TriSensor yakho.
I-TriSensor yakho iza ihlanganiswe ngenani lezesekeli ezizosiza ekufakweni nasekusebenzeni kwayo.
Okuqukethwe Kwephakheji:
1. I-TriSensor
2.I-1x CR123A Ibhethri (ifakiwe)
3. Emuva-Mount Ingalo
4. Iteyipu emaceleni amabili
5. Izikulufu ze-2x
6. Ibhethri lifakiwe ku-TriSensor
Inzwa Imisebenzi;
1. Ukunyakaza
2. Izinga lokushisa
3. Ukukhanya
Izinkinobho Zokunyathelisa.
| Cindezela inkinobho | Umsebenzi | Ukusabela kwe-LED | Lapho Inkinobho Ikhishwa |
| Thepha kanye (uma kungabhanqiwe). | Bhangqa / Faka | I-LED Ephuzi imizuzwana engu-10. | Ikhanya okwesibhakabhaka kabili lapho ibhangqwe ngempumelelo. |
| Thepha kanye ngenkathi isango likumodi engabhangqiwe. | Susa ukubhangqa / Susa | I-Purple LED imizuzwana emi-2. | Ngenkathi i-LED ingabhangqiwe. |
| Thepha kanye (uma kubhangqiwe). | Thumela i-NIF | I-Purple LED imizuzwana emi-2. | - |
| Cindezela bese ubamba imizuzwana emi-2. | Umbiko Wokuvuka | I-LED ebomvu | Umbiko Wokuvuka |
| Cindezela bese ubamba imizuzwana emi-5. | Vuka imizuzu emihlanu | I-LED ephuzi | Vuka imizuzu emihlanu |
| Cindezela bese ubamba imizuzwana emi-9. | Ukuhlolwa Kwezempilo | I-Cyan LED | Ukuhlolwa Kwezempilo - Ukudanyaza kwe-Cyan LED ngesikhathi sokuhlolwa kwezempilo, bese kukhanya kubomvu, kuphuzi, noma kuluhlaza ukuthola ukuxhumana okuqondile nempilo yesango. |
| Cindezela bese ubamba imizuzwana emi-15. | Ukusetha kabusha kwasefekthri | I-LED ebomvu | Ukusetha kabusha kwefekthri - Ukukhanya okubomvu kwe-LED ukuqinisekisa ukusetha kabusha kwefekthri okuyimpumelelo. |
Ulwazi olubalulekile lokuphepha.
Sicela ufunde lokhu kanye neminye imihlahlandlela yedivayisi ngokucophelela.Ukuhluleka ukulandela izincomo ezibekwe yi-Aeotec Limited kungaba yingozi noma kubangele ukwephulwa komthetho. Umkhiqizi, ongenisa izimpahla ngaphakathi ezweni, umsabalalisi, kanye / noma othengisa kabusha impahla ngeke abekwe icala ngokulahleka noma umonakalo odalwe ukungalandeli noma imiphi imiyalo kulo mhlahlandlela noma kwezinye izinto.
Gcina umkhiqizo namabhethri kude namalangabi avulekile nokushisa okukhulu. Gwema ukukhanya kwelanga okuqondile noma ukuchayeka kokushisa. Susa njalo amabhethri emikhiqizweni egcinwayo engasetshenziswanga. Amabhethri angalimaza okokusebenza uma kuvuza. Ungasebenzisi amabhethri angavuseleleka. Qinisekisa polarity efanele lapho ufaka amabhethri. Ukusetshenziswa okungalungile kwebhethri kungalimaza umkhiqizo.
I-TriSensor ihloselwe ukusetshenziswa ezindaweni ezomile kuphela. Ungasebenzisi ku-damp, izindawo ezimanzi, kanye / noma ezimanzi.
Iqukethe izingxenye ezincane; hlukana nezingane.
Qala Ngokushesha.
Setha Amandla Akho.
I-TriSensor izonikwa amandla ngebhethri. Lezi zinyathelo zingenziwa kunoma iyiphi indawo ngaphakathi kwekhaya lakho, futhi hhayi endaweni yakho yokugcina yokufaka i-TriSensor.
Okokufakwa kwamandla ngebhethri:
1. Susa ikhava yangemuva yenzwa yakho ngokuslayida ingidi ngakwesokudla.
2. Khipha ibhethri le-CR123A bese ususa ithebhu yepulasitiki.
3. Buyisela ibhethri le-CR123A endaweni yalo yokuqala.
Lapho nje i-TriSensor ivuliwe, izokhanyisa ama-LED ayo abomvu amahlandla ama-4 ukukhombisa ukuthi manje inikwe amandla futhi isilungele ukubhangqwa.
Ukungeza i-TriSensor yakho kunethiwekhi ye-Z-Wave.
Ngayo ivuliwe, manje yisikhathi sokungeza i-TriSensor yakho kunethiwekhi ye-Z-Wave. Ukubhangqa i-TriSensor, awukhawulelwe ku-Z-Stick noma eMinimote kuphela. Ungasebenzisa noma iyiphi i-Z-Wave Gateway ukubhangqa i-TriSensor, kepha ukuhambisana nokuthi inzwa ikhombisa kanjani ekugcineni kuncike esangweni nasekuhlanganisweni kwesoftware kwemikhiqizo.
Uma usebenzisa i-Z-Stick evela ku-Aeotec:
1. Uma i-Z-Stick yakho ixhunywe esangweni noma kukhompuyutha, yikhiphe.
2. Thatha i-Z-Stick yakho uyihambise ku-TriSensor yakho.
3. Cindezela i-Action Button ku-Z-Stick yakho. I-LED izoqala ukucwayiza i-Blue LED kancane.
4. Cindezela Inkinobho Yesenzo ku-TriSensor yakho. I-LED ku-TriSensor izocwayiza imhlophe, bese iba yi-LED eqinile ephuzi, ilandelwe yimibani emi-2 emhlophe bese iluhlaza I-LED ukukhombisa ukufakwa okuyimpumelelo. Uma inqubo yokubhangqa ihlulekile, i-LED izosebenza ngaphandle kokukhanyisa okumhlophe noma okuluhlaza.
5. Ungahlola ukuthi ngabe i-TriSensor yakho ifakwe ngempumelelo kwinethiwekhi yakho ye-Z-Wave ngokucindezela i-Action Button yayo. Uma ucindezela inkinobho nobunsundu benzwa yakho I-LED iqinile imizuzwana embalwa, bese ukufakwa kube yimpumelelo. Uma i-LED ephuzi iqinile lapho inkinobho icindezelwe, ukufakwa akuphumelelanga futhi kufanele uphinde izinyathelo kusuka kusinyathelo 1.
6. Cindezela inkinobho yesenzo ku-Z-Stick ukuyibuyisela kumodi yokufaka.
Ibuyisele esangweni lakho noma kukhompyutha.
Uma usebenzisa isango elithile le-Z-Wave ungadinga ukubhekisa kumanuwali yalo yomsebenzisi ngaphambi kokuqhubeka:
7. Setha isango lakho le-Z-Wave noma isoftware ukwamukela iZ-Stick njenge-Z-Wave Controller. Usebenzisa isango lakho noma isoftware, skena kabusha imikhiqizo emisha uma kudingeka, uma kungenjalo, amadivayisi amasha asanda kufakwa kufanele agcwaliswe ngokuzenzakalela kusixhumi esibonakalayo sesango / isoftware yakho.
Uma usebenzisa isango esivele likhona (isb. IVera, i-Smartthings, i-ISY994i ZW, iFibaro, njll):
Ungadinga ukubhekisa kundlela yakho yesango lokufaka amadivayisi uma ungazi ukuthi ungabhangqa kanjani idivayisi ye-Z-Wave.
1. Faka isango lakho eliyinhloko le-Z-Wave kumodi yokubhangqa, isango lakho le-Z-Wave kufanele liqinisekise ukuthi lilinde ukufaka idivayisi entsha
2. Cindezela Inkinobho Yesenzo ku-TriSensor yakho. I-LED ku-TriSensor izocwayiza imhlophe, bese iba yi-LED eqinile ephuzi, ilandelwe yimibani emi-2 emhlophe bese iluhlaza I-LED ukukhombisa ukufakwa okuyimpumelelo. Uma inqubo yokubhangqa ihlulekile, i-LED izosebenza ngaphandle kokukhanyisa okumhlophe noma okuluhlaza.
3. Ungahlola ukuthi ngabe i-TriSensor yakho ifakwe ngempumelelo kwinethiwekhi yakho ye-Z-Wave ngokucindezela i-Action Button yayo. Uma ucindezela inkinobho nobunsundu benzwa yakho I-LED iqinile imizuzwana embalwa, bese ukufakwa kube yimpumelelo. Uma i-LED ephuzi iqinile lapho inkinobho icindezelwe, ukufakwa akuphumelelanga futhi kufanele uphinde izinyathelo kusuka kusinyathelo 1.
Ukukhetha Indawo ye-TriSensor yakho.
I-TriSensor ingaletha ukufundwa kwayo okuhlakaniphile ezindaweni eziningi zekhaya lakho. Ngaphambi kokuthatha isinqumo ngendawo, kunezinto okufanele uqale uzicabangele.
Inzwa yokunyakaza ye-TriSensors isebenzisa ukukhanya nokufundwa kokushisa ukuthola ukunyakaza; ukushintsha okungazelelwe kokukhanya nokushisa kungathinta ikhwalithi yenzwa yokufunda kokunyakaza. Kanjalo, inzwa yakho akufanele ifakwe ezindaweni zokushintsha kokushisa okufakelwayo. Ngakho-ke, lapho ukhetha indawo, gwema ukuyibeka eceleni noma eduze kwama-air conditioner, nezifudumezi.
I-TriSensor yakho izonikwa amandla ngamabhethri, kufanele ugweme ukuyifaka endaweni lapho izinga lokushisa lingehla ngaphansi kuka-0 ° C / 32 ° F - lokhu kungaphansi kwanoma iyiphi indawo yokusebenzisa ibhetri. Ukukhetha indawo yenzwa yakho futhi kuya ngesakhiwo sanoma iyiphi indawo ofuna ukugadwa kuyo. Noma ngabe ikuphi igumbi noma indawo, sicela uqinisekise ukuthi liyalingana nebanga lenzwa yakho yokunyakaza elisebenza kahle njengoba kuchaziwe kwimidwebo elandelayo.
Ukuze isebenze kahle, i-TriSensor yakho AKUFANELE ifakwe ngqo noma eduze kohlaka lwensimbi noma ezinye izinto ezinkulu zensimbi. Izinto ezinkulu zensimbi zinganciphisa isignali ye-Z-Wave engenantambo i-TriSensor incike ekuxhumaneni ngenxa yezakhiwo zensimbi ezingenazintambo.
Ibanga lokutholwa kokunyakaza okuphezulu kwe-TriSensor ngu: 23ft noma 7m.
Ukufakwa kwangaphandle.
Uyacelwa ukuthi wazi ukuthi uma ifakwe ngaphandle kwekhaya lakho, i-TriSensor yakho kufanele ithembele kuphela ekushiseni nasekukhanyeni lapho amandla ezwa ukunyakaza kufanele akhutshazwe esangweni lakho ukuze ugweme ukufundwa kokunyakaza okungamanga. Uma ukhetha indawo engaphandle, kubalulekile ukubeka i-TriSensor yakho endaweni evikelekile. Kungcono uma i-TriSensor yakho ingadalulwa ngqo yimvula, iqhwa, noma ezinye izinto.
Uma ufisa ukusebenzisa i-TriSensor ngaphandle, uzodinga ukwehlisa izilungiselelo, bese ugoba i-TriSensor ngokufanele njengoba zonke izindawo zizodinga izixazululo ezahlukahlukene noma amasethingi ahlukile ukuze inzwa yokunyakaza isebenze kahle. Ipharamitha 3 [1 byte] izonquma ukuzwela kwenzwa yokunyakaza kusukela kubanga lenani elingu-0 likhutshaziwe laya kokuzwela okuphezulu okungu-11 (amandla akho okulungisa lokhu kulungiselelwa kuzoya ngesango elisetshenzisiwe).
Kuyelulekwa ukuthi uma ubona ukulandelwa kokunyakaza okungelona iqiniso, sebenzisa isiphambeko nephutha ukuthola ukuzwela okuhle kakhulu kusuka kububanzi obungu-0 - 11 ngokuya ezingeni lokuzwela eli-1 ngemuva kovivinyo ngalunye (okokuqala 5, 4, 3, 2, bese 1) , ngenkathi kusethwa Ipharamitha 3 [2 byte] kuye ku-5 ukuvumela isikhathi sokuvala se-PIR semizuzwana eyi-5 ngemuva kokuthola ukunyakaza ukuze kunqume ngokushesha amasethingi amahle okusetshenziswa kokunyakaza ngaphandle.
Faka ngokomzimba i-TriSensor yakho.
Nge-TriSensor yakho manje eyingxenye yenethiwekhi yakho ye-Z-Wave futhi usunqume indawo yayo yokufaka, sekuyisikhathi sokuqeda ukufakwa kwayo ngokomzimba. Kunezindlela ezi-2 i-TriSensor yakho engabekwa ngayo odongeni noma ophahleni. Ngokumane nje ingabekwa eshalofini ngaphandle kwesidingo sokunamathisela izesekeli ezengeziwe. Ungafaka inzwa yakho ekhoneni noma odongeni noma ophahleni ngokusebenzisa i-Back-Mount Plate. Kungenzeka futhi ukushumeka i-TriSensor yakho ngaphakathi kophahla noma udonga usebenzisa isesekeli sayo seRecessor (esithengiswa ngokwehlukile).
Ukufaka i-TriSensor yakho;
Namathisela izingxenye ezintathu ze-TriSensor yakho komunye nomunye. Vula ifayela le- Ikhava yebhethri kusuka kuyunithi yeNzwa.
Ungafaka futhi i-TriSensor yakho kunoma iyiphi indawo eyisicaba njengamatafula, namashalofu amabhuku;
Ungayibeka eshalofini ngaphandle kwesidingo sokunamathisela izesekeli ezengeziwe.
Ukufaka i-TriSensor yakho nge-Back-Mount Plate;
1. Unganamathisela i-Back-Mount Arm nge-Double-Sided Tape noma usebenzise izikulufo ezihlinzekiwe ze-KA2.5 × 20 mm.
Amathiphu: Siphakamisa ukuthi ukhethe indlela yesibili (usebenzisa izikulufu ukufaka i-Back-Mount Arm) engaqina kakhudlwana.
2. Ngemuva kokuthi uqede ukufakwa kwe-Back-Mount Arm, uzodinga ukukhiya i-TriSensor ku-Back-Mount Arm ngokugoqa i-TriSensor ku.
3. I-Back-Mount Arm ingakhiywa ema-engele ahlukahlukene ngokuguqula i I-Friction Lock ngokwewashi nokuphikisana newashi ngokulandelana ukuqinisa noma ukukhulula i-engeli yengalo. Ungakwazi ukushintshanisa i-Friction Lock ukuze ushintshe indawo yokukala yenzwa.
Imisebenzi Ethuthukile.
Ukubikwa kwebhethri.
I-TriSensor yakho yakhe ukutholakala kwezinga lebhethri. Izobika ngokuzenzakalela ileveli yayo yebhethri kwisilawuli / esangweni elihambisanayo kuyo yonke impilo yayo kuze kube yilapho ibhethri selicijile ngokuphelele futhi lidinga ukushintshwa. Isimo sebhethri sizovame ukukhonjiswa kusixhumi esibonakalayo somsebenzisi sesilawuli / isango. Uma isetshenziswe kahle kunethiwekhi ye-Z-Wave elungiselelwe, i-TriSensor yakho ingaxhaswa ngamabhethri izinyanga ezingama-24 ngaphambi kokudingeka kokushintshwa kwebhethri.
Isincomo: Kumanethiwekhi anganikeli ngendlela engaboniswa
Ezingeni lebhethri le-TriSensor yakho, kunconywa ukuthi inzwa ihlolwe ngezikhathi ezithile ukuqinisekisa ukuthi amabhethri asabambe imali eyanele ukusebenza. Amabhethri ngokwemvelo alahlekelwa ukukhokhiswa kwawo ngokuhamba kwesikhathi.
Imibiko yebhethri nokuthi ifika nini.
Kunezindlela ezimbalwa zokuvuselela isimo sebhethri lakho.
- Ukuvota
- Umyalo we-Battery GET
- Umbiko Wesaziso Esizenzakalelayo
Indlela elungiselelwe kakhulu ukulinda i-TriSensor ku-Wakeup bese uthumela umbiko webhethri ngalesi sikhathi. Ukuze uvote noma uthumele umyalo we-Battery GET ku-TriSensor, le sensor izodinga ukubika umbiko we-Wakeup esangweni lakho.
Ngokuzenzakalelayo, i-Wakeup Report izothunyelwa ngesikhathi esisodwa kanye namahora ayisishiyagalombili kanye noMbiko wayo weBhethri.
Ukuvusa i-TriSensor ngesandla.
Ngesikhathi i-TriSensors isetshenziswa ngokujwayelekile, i-TriSensor izohlala isesimweni sokulala ukonga amandla ebhethri futhi izoqhubeka nokuthola ukunyakaza nokubika izinzwa esangweni lakho, i-TriSensor idinga ukuphaphama noma isesimweni esisebenzayo ukuze yenze ukucushwa okusha noma imiyalo. Kunezindlela ezi-2 zokuvusa i-TriSensor yokufaka imiyalo emisha esangweni lakho le-Z-Wave.
Phambili komyalo wombiko wokuvuka (vusa i-TriSensor okwesikhashana).
Ukudlulisela umbiko wokuvuka esangweni lakho kuyindlela enhle yokuthi abakwa-TriSensor bathathe imiyalo emigqeni esangweni lakho. Uma ulayini wakho wesango uyala kumadivayisi webhethri, ungangena kulayini imiyalo eminingi ye-TriSensor bese wenza lesi sinyathelo ukuthatha yonke imiyalo ngasikhathi sinye.
- Susa ikhava yebhethri ye-TriSensors (ngokuvula bese ususa ikhava)
- Cindezela bese ubamba inkinobho ye-TriSensors Action kuze kube yilapho i-LED iba bomvu. (2 imizuzwana yokubamba)
- Khipha inkinobho ye-TriSensors.
Gcina i-TriSensor iphapheme imizuzu emihlanu.
Ukugcina i-TriSensor yakho iphapheme kuyindlela enhle yokuthumela imiyalo ngamunye ngamunye kusuka esangweni lakho njengoba ukwazi ngamadivayisi we-plugin Z-Wave ahlala esebenza. Lokhu kuhle kumasango angakufaki emigqeni womugqa wakho futhi adinga isenzo esisheshayo.
- Susa ikhava yebhethri ye-TriSensors (ngokuvula bese ususa ikhava)
- Cindezela bese ubamba i-TriSensors Action Button kuze kube yilapho i-LED iphenduka iphuzi. (5 imizuzwana yokubamba)
- Khipha inkinobho ye-TriSensors.
Uma ngabe uphumelele ekugcineni i-TriSensor iphapheme, i-LED yayo ephuzi izohlala iqinile kuze kufike kumaminithi we-5. Uma isango lakho lithumela umyalo wokuthi AKUSEKHO ULWAZI futhi, lokhu kuzobuyisela i-TriSensor yakho emuva ngokushesha ukuze ilale ngokushesha (ngakho-ke uma ubona ukuthi i-LED ephuzi inyamalale ngokushesha, yilokho kanye okwenzekayo).
Ungabeka futhi i-TriSensor emuva ngokulala ngokuthepha inkinobho yayo kanye.
Imvamisa i-TriSensor yakho izovuka ngokuzenzakalela kanye njalo emahoreni ayi-8 ngokuzenzakalela.
Ukuhlola Ukuxhumana Kwezempilo.
Qaphela - Ukuhlolwa kwezempilo akuvivinyi ukuhambisa umzila wezokuxhumana, kuphela ukuhlolwa kokuxhumana okuqondile nesango lakho ukuthola ukuthi kunokuxhumana okuqondile okunempilo yini.
Unganquma impilo yokuxhuma kwakho kwe-TriSensors esangweni lakho usebenzisa inkinobho yezandla, bamba, futhi ukhiphe umsebenzi okhonjiswa umbala we-LED.
- Susa ikhava yebhethri le-TriSensors. (ngokuvula bese ususa ikhava)
- Cindezela bese ubamba i-TriSensors Action Button kuze kube yilapho i-LED iphenduka umbala o-cyan / blue. (9 imizuzwana yokubamba)
- Khipha inkinobho ye-TriSensors.
- I-TriSensor izongena kwimodi yokuhlolwa kwezokuxhumana kwezempilo ngokucwayiza i-cyan / blue LED yayo, lokhu kuzoqhubeka cishe imizuzu emibili.
- I-LED izoshintshela kumbala oqinile wemizuzwana emi-2 ukukhombisa impilo nokuxhumana kwayo esangweni / isilawuli sakho (1 kwemibala emi-3):
Okubomvu = Impilo Embi
Okuphuzi = Impilo Elingene
Okuluhlaza okotshani = Impilo enhle
Ngesandla Factory Setha kabusha i-TriSensor.
Le ndlela ayeluleki ngokugcwele ngaphandle kokuthi isango lakho lihlulekile, futhi awunayo enye isango lokwenza ukungabhangiswa okujwayelekile ku-TriSensor.
- Cindezela bese ubamba inkinobho ye-TriSensor Action
- Linda kuze kube yilapho i-RGB LED isuka ku:
– Ebomvu
- Iwolintshi
- UCyan
- I-Red LED ikhanya amahlandla ama-5 okuzokhombisa ukusethwa kabusha kwasefekthri. - Uma i-TriSensor yakho isethwe kabusha ngempumelelo kusuka kunethiwekhi yayo yangaphambilini, i-LED izoba luphuzi oluqinile lapho uthepha i-Action Button yayo. Uma lokhu kwehlulekile, i-LED izoba umbala oqinile onsomi imizuzwana emi-2 lapho uthepha i-Action Button.
Ukususa i-TriSensor yakho ku-Z-Wave Network.
I-TriSensor yakho ingasuswa kunethiwekhi yakho ye-Z-Wave nganoma yisiphi isikhathi. Uzodinga ukusebenzisa isilawuli sakho senethiwekhi se-Z-Wave ukwenza lokhu futhi imiyalo elandelayo ikutshela ukuthi ungakwenza kanjani lokhu.
Uma usebenzisa i-Z-Stick:
1. Uma i-Z-Stick yakho ixhunywe esangweni noma kukhompuyutha, yikhiphe.
2. Thatha i-Z-Stick yakho uyihambise ku-TriSensor yakho.
3. Cindezela bese ubamba Inkinobho Yesenzo ku-Z-Stick yakho imizuzwana emi-3 bese bese udedela.
4. Cindezela Inkinobho Yesenzo ku-TriSensor yakho kanye. I-LED ku-TriSensor izoba ngumbala onsomi oqinile.
5. Uma ngabe i-TriSensor yakho isuswe ngempumelelo kunethiwekhi yakho, i-LED izokhanya mhlophe, luhlaza, mhlophe, luhlaza (mhlophe, bese luhlaza izikhathi ezi-2x).
6. Cindezela i-Action Button ku-Z-Stick ukuze uyikhiphe kumodi yokususa.
Uma usebenzisa isango esivele likhona:
Ungadinga ukuthi ubheke indlela yakho yesango lokufaka amadivayisi uma ungazi ukuthi ungabhangqa kanjani idivayisi ye-Z-Wave. Ungasebenzisa noma iyiphi isango ukwenza ukungabhangiswa / ukususwa ku-TriSensor noma kungabhanqiwe ndawonye ukusetha kabusha i-TriSensor kwasefekthri.
1. Faka isango lakho eliyinhloko le-Z-Wave kumodi engabhangqiwe, isango lakho le-Z-Wave kufanele liqinisekise ukuthi lilinde ukususa idivayisi
2. Cindezela Inkinobho Yesenzo kuzikhathi zakho ze-TriSensor 3x ngemizuzwana emi-2. I-LED ku-TriSensor izoba ngumbala onsomi oqinile.
3. Uma ngabe i-TriSensor yakho isuswe ngempumelelo kunethiwekhi yakho, i-LED izokhanya mhlophe, luhlaza, mhlophe, luhlaza (mhlophe, bese luhlaza izikhathi ezi-2x).
Ukucushwa okuthuthukile kwe-TriSensor.
Ungase futhi view ishidi lethu lobunjiniyela le-TriSensor lapha: https://aeotec.freshdesk.com/helpdesk/attachments/6064224662
Ukuqapha ukunyakaza.
Lapho i-TriSensor ithola umcimbi wokunyakaza izothumela ngokuzenzakalela umbiko wesaziso kuQembu 1 okuvame ukusethwa ngokuzenzekelayo ukubika esangweni lakho lapho ubhanqa i-TriSensor yakho.
| I-Command Class |
I-COMMAND_CLASS_NOTIFICATION |
| Umyalo |
ISAZISO_ UMBIKO |
| Uhlobo |
I-HOME_SECURITY (0x07) |
| Umcimbi |
HOME_SECURITY_MOTION_DETECTION_UNKNOWN_LOCATION (0x08) / I-HOME_SECURITY_NO_EVENT (0x00) |
Ngokuzenzakalelayo, inzwa yakho izophela ngemuva kwamasekhondi angu-240, ukuze isetshenziswe kangcono njengenzwa yobukhona, ungafaka kabusha inzwa yokunyakaza ukuze usethe kabusha ukuphela kwayo kubuyele kumasekhondi angu-240 ngemuva kwemizuzwana engama-30. Lezi zilungiselelo ziyahleleka.
1. Isikhathi sokuqalisa sokunyakaza.
Lokhu kulungisa isikhathi sokulibaziseka ngaphambi kokuthi ufake kabusha inzwa ye-PIR, uma i-re-trigger yenzeka phakathi kwesikhathi sokubuyisa nesikhathi esicacile, lokhu kuzosetha kabusha iwashi lesikhathi elicacile. Uma lokhu kukhutshaziwe, kufanele ulinde kuze kube yilapho ukunyakaza kusula ukuze uphinde uqale ukunyakaza.
Lesi silungiselelo sisetshenziswa njengomqondo wobukhona futhi sisebenza ngokubambisana nePharamitha 2. Lokhu kuzosiza futhi ngokulondolozwa kombiko webhethri njengokungathi uqala kabusha ngaphambi kokuphela kwesikhathi esicacile, i-TriSensor ngeke ithumele umbiko.
| Ipharamitha # | Usayizi | Inani | Incazelo |
| 1 | 2 | 0 | Khubaza i-Motion Re-Trigger. |
| 1-32767 | Ukubambezeleka kwesikhathi ngemizuzwana. |
UKUHLELWA KWEZIKHUNGO = 30
2. Isikhathi esicacile sokuhamba.
Lokhu kulungiselela isikhathi esicacile lapho inzwa yakho yokunyakaza iphuma futhi ithumele isimo sokunganyakazi.
| Ipharamitha # | Usayizi | Inani | Incazelo |
| 2 | 2 | 1-32767 | Sula / isikhathi sokuvala ngemizuzwana. |
UKUHLELWA KWEZIKHUNGO = 240
3. Ukuzwela kokunyakaza.
Lesi silungiselelo silungiselela ukuzwela kwe-Motion Sensor lapho i-0 ikhutshaziwe, i-1 ukuzwela okuphansi kakhulu, ne-11 ukuzwela okuphezulu.
| Ipharamitha # | Usayizi | Inani | Incazelo |
| 3 | 1 | 0-11 | Isetha ukuzwela kokunyakaza. |
UKUHLELWA KWEZIKHUNGO = 11
4. Vumela / Khubaza i-Binary Sensor
Lokhu kulungiselelwa kusetshenziselwa ukunika amandla imibiko yenzwa kanambambili esetshenziselwa amasango asebenzisa isitayela esidala semibiko yokunyakaza. Uma ungaboni ushintsho lwesimo ngaphezu kwenzwa yakho yokunyakaza, kufanele unike amandla lokhu kulungiselelwa.
| I-Command Class |
I-COMMAND_CLASS_SENSOR_BINARY |
| Umyalo |
SENSOR_BINARY_ UMBIKO |
| Uhlobo |
UKUNYAKAZA (0x0C) |
| Umcimbi |
Kutholakele (0xFF) / Akutholakalanga (0x00) |
| Ipharamitha # | Usayizi | Inani | Incazelo |
| 4 | 1 | 0 | Ikhubaza umbiko wenzwa kanambambili |
| 1 | Inika amandla Umbiko wenzwa kanambambili |
UKUHLELWA KWEZIKHUNGO = 0
Inhlangano Yeqembu yokulawula ngqo.
I-TriSensor inezindawo ezi-2 zokulawula iqembu ukulawula ngqo amadivayisi we-Z-Wave ngaphandle kwesango lakho. Ngezansi kwetafula le-Group Association etholakalayo ongalisetha ku-TriSensor ukulawula ngqo ama-Z-Wave Switches nama-Dimmers akho ngaphakathi kwesango lakho.
| Inhlangano Yeqembu # | Umsebenzi |
| 2 | I-Motion Trigger = vula idivayisi Ayikho i-Motion Trigger = cisha idivayisi. |
| 3 | Ithempelesha> Threshold = vula idivayisi. Izinga lokushisa |
Yini inhlangano yeqembu?
I-Group Association ingumsebenzi othile ku-Z-Wave ekuvumela ukuthi utshele i-TriSensor ukuthi ingakhuluma nobani. Amanye amadivayisi angaba nenhlangano yeqembu elingu-1 kuphela ehloselwe isango, noma izinhlangano zeqembu eziningi ezingasetshenziselwa imicimbi ethile. Lolu hlobo lomsebenzi alusetshenziswa kaningi, kepha uma lutholakala, ungakwazi ukulusebenzisa ukuxhumana ngqo namadivayisi we-Z-Wave esikhundleni sokulawula indawo esangweni engaba nokubambezeleka okungalindelekile.
UVera unamandla okusetha Izinhlangano Zeqembu kumadivayisi anale micimbi ekhethekile nemisebenzi. Kwicala le-TriSensor, lingakhuluma ngqo kumadivayisi elixhumene nawo ekuguquleni ngqo izilawuli ze-On / Off ngamazinga okushisa noma okubangela inzwa yokunyakaza ngaphandle kokuxhumana nesango lakho.
Okwesiboneloample:
- Kusetshenziswa izinhlangano zeqembu kuzokhuluma ngqo kudivayisi ye-Z-Wave, lokhu kuzocubungula ngaphansi komzuzwana owodwa ngokuvamile ngaphakathi kwe-1-10ms.
- Iqala indawo, idivayisi izodinga ukuvuselela isimo sayo esangweni lakho, bese inqubo yokungena kwesibuyekezo sesimo bese ithumela isenzo noma ushintshele kudivayisi ye-Z-Wave ngokususelwa ku-trigger. Kwesinye isikhathi kungahle kube nokubambezeleka uma isango lakho selivele licubungula enye idatha engadala ukubambezeleka kwesibili kwesikhathi ngezikhathi ezithile.
Mangaki amadivayisi ongawalawula.
Ungalawula amadivayisi we-5 ngeQembu ngalinye leqembu ngamadivayisi ahlukene ayi-10 ngenkinobho ngayinye kuma-Associations Eqembu e-2
Example;
- Amadivayisi we-5 kuQembu 2 (ukulawula inzwa yokunyakaza)
- Amadivayisi we-5 ku-Group 3 (control sensor sensor)
Ngiwalawula kanjani amadivayisi wami ngisebenzisa ukuzihlanganisa kweqembu?
Lokhu kunzima kancane njengoba amasango amaningi enikeza lo msebenzi futhi amasango amaningi nje angeke anikeze inketho yokuhlelela lokhu. Kuzodingeka ubheke imisebenzi yakho yamasango futhi ubone ukuthi bayayisekela i- "Group Association" nokuthi ungayenza kanjani.
5. Nika amandla noma khubaza inhlangano yeqembu le-2 noma le-3 ukulawula okuqondile.
Le pharamitha ihlelwe ukuthi ithunyelwe noma ikhutshaziwe umyalo we-BASIC_SET kuma-node ahlobene neqembu 2 neqembu 3.
| Ipharamitha # | Usayizi | Inani | Incazelo |
| 5 | 1 | 0 | Kukhutshazwe Yonke Imiyalo Eyisisekelo Yeqembu |
| 1 | I-Enabled Group 2 Basic Set Command, Iqembu 3 Basic Set Command likhutshaziwe. | ||
| 2 | I-Enabled Group 3 Basic Set Command, Iqembu 2 Basic Set Command likhutshaziwe. | ||
| 3 | Inikwe amandla i-Group 2 ne-Group 3 Basic Set Command. |
UKUHLELWA KWEZIKHUNGO = 3
6. Izilawuli Eziyisisekelo zeQembu 2.
Lesi silungiselelo sikunikeza ukulawula okwengeziwe kokuthi iQembu 2 lilawulwa kanjani yinzwa yakho yokunyakaza.
| Ipharamitha # | Usayizi | Inani | Incazelo |
| 6 | 1 | 0 | Thumela i-BASIC_SET = 0xFF kumadivayisi ahlobene neQembu 2 lapho umcimbi wokunyakaza uqalwa, thumela i-BASIC_SET = 0x00 kumadivayisi ahlobene neqembu 2 lapho umcimbi wokunyakaza ususwa. |
| 1 | Thumela i-BASIC_SET = 0x00 kumadivayisi ahlobene neQembu 2 lapho umcimbi wokunyakaza uqalwa, send BASIC_SET = 0xFF kumadivayisi ahlobene neqembu 2 lapho umcimbi wokunyakaza usuliwe. |
||
| 2 | Thumela i-BASIC_SET = 0xFF kumadivayisi ahlobene neQembu 2 lapho umcimbi wokunyakaza uqalwa. | ||
| 3 | Thumela i-BASIC_SET = 0x00 kumadivayisi ahlobene neQembu 2 lapho umcimbi wokunyakaza uku kucushiwe. |
||
| 4 | Thumela i-BASIC_SET = 0x00 kumadivayisi ahlobene neQembu 2 lapho umcimbi wokunyakaza usuliwe. | ||
| 5 | Thumela i-BASIC_SET = 0xFF kumadivayisi ahlobene neQembu 2 lapho umcimbi wokunyakaza usuliwe. |
UKUHLELWA KWEZIKHUNGO = 0
7. TUkumiswa kwe-alamu ye-emperature (Isilawuli seqembu 3).
Le parameter ilungiselelwe inani lomkhawulo lelo zinga le-alamu lokushisa. Lapho inani lamanje lokushisa le-ambient likhulu kunaleli nani lokumisa, i-TriSensor izothumela i-BASIC_SET = 0xFF kuma-node ahlobene neqembu 3. Uma inani lamanje lokushisa lingaphansi kwaleli nani, idivayisi izothumela i-BASIC_SET = 0x00 kuma-node ahlobene neqembu 3 .
Lokhu kulungiselelwa kuhle ekuphathweni kwama-Air Conditioners.
| Ipharamitha # | Isifunda | Usayizi | Inani | Okuzenzakalelayo |
| 7 | EU / AU | 2 | 400-850 | 239 C |
| US | 2 | 400-1185 | 750 F |
Amasethingi wokulawula we-LED.
Ungalawula ukuthi imiphi imibala i-LED ekhanyayo lapho kwenzeka imicimbi ethile ye-Motion, Temperature, Light, Battery, ne-Wakeup.
10. Nika amandla noma Khubaza i-LED ngaphezulu kwe-TriSensor
Lokhu kukhubaza ngokuphelele konke ukuphendula kwe-LED, lokhu kuzothinta izilungiselelo zeParameter 11 - 15.
Ipharamitha = 10
Usayizi = 1 Byte
Amanani nencazelo;
0 = Khubaza ama-LED
1 = Nika amandla ama-LED [Okuzenzakalelayo]
11. Motion umbiko LED.
Lokhu kulungiselelwa kushintsha umbala we-LED lapho i-TriSensor yakho ithumela umbiko wokunyakaza. (* Le parameter isetshenziswa kuphela uma Ipharamitha 10 lisethelwe ku-1 / vumela).
| Ipharamitha # | Usayizi | Inani | Incazelo |
| 11 | 1 | 0 | Khubaza |
| 1 | Okubomvu | ||
| 2 | Okuhlaza [Okuzenzakalelayo] | ||
| 3 | Okuluhlaza okwesibhakabhaka | ||
| 4 | Okuphuzi | ||
| 5 | Pink | ||
| 6 | I-Cyan | ||
| 7 | Okunsomi | ||
| 8 | iwolintshi |
12. Umbiko wethempelesha i-LED.
Lokhu kulungiselelwa kushintsha umbala we-LED lapho i-TriSensor yakho ithumela umbiko wokushisa. (* Le parameter isetshenziswa kuphela uma Ipharamitha 10 lisethelwe ku-1 / vumela).
| Ipharamitha # | Usayizi | Inani | Incazelo |
| 12 | 1 | 0 | Khubaza [Okuzenzakalelayo] |
| 1 | Okubomvu | ||
| 2 | Okuhlaza | ||
| 3 | Okuluhlaza okwesibhakabhaka | ||
| 4 | Okuphuzi | ||
| 5 | Pink | ||
| 6 | I-Cyan | ||
| 7 | Okunsomi | ||
| 8 | iwolintshi |
13. Umbiko okhanyayo we-LED.
Lokhu kulungiselelwa kushintsha umbala we-LED lapho i-TriSensor yakho ithumela umbiko okhanyayo. (* Le parameter isetshenziswa kuphela uma Ipharamitha 10 lisethelwe ku-1 / vumela).
| Ipharamitha # | Usayizi | Inani | Incazelo |
| 13 | 1 | 0 | Khubaza [Okuzenzakalelayo] |
| 1 | Okubomvu | ||
| 2 | Okuhlaza | ||
| 3 | Okuluhlaza okwesibhakabhaka | ||
| 4 | Okuphuzi | ||
| 5 | Pink | ||
| 6 | I-Cyan | ||
| 7 | Okunsomi | ||
| 8 | iwolintshi |
14. Umbiko webhethri LED.
Kungenzeka ushintshe umbala walokho okukhanyayo i-LED lapho i-TriSensor yakho ithumela umbiko webhethri. (* Le parameter isetshenziswa kuphela uma Ipharamitha 10 lisethelwe ku-1 / vumela).
| Ipharamitha # | Usayizi | Inani | Incazelo |
| 14 | 1 | 0 | Khubaza [Okuzenzakalelayo] |
| 1 | Okubomvu | ||
| 2 | Okuhlaza | ||
| 3 | Okuluhlaza okwesibhakabhaka | ||
| 4 | Okuphuzi | ||
| 5 | Pink | ||
| 6 | I-Cyan | ||
| 7 | Okunsomi | ||
| 8 | iwolintshi |
15. Umbiko wokuvuka kwe-LED.
Lokhu kulungiselelwa kushintsha umbala we-LED lapho i-TriSensor yakho ithumela umbiko wokuvuka. (* Le parameter isetshenziswa kuphela uma Ipharamitha 10 lisethelwe ku-1 / vumela).
| Ipharamitha # | Usayizi | Inani | Incazelo |
| 15 | 1 | 0 | Khubaza [Okuzenzakalelayo] |
| 1 | Okubomvu | ||
| 2 | Okuhlaza | ||
| 3 | Okuluhlaza okwesibhakabhaka | ||
| 4 | Okuphuzi | ||
| 5 | Pink | ||
| 6 | I-Cyan | ||
| 7 | Okunsomi | ||
| 8 | iwolintshi |
Izilawuli zokushisa.
20. Ukusetha Isikali Sokushisa.
Ungalawula ukuthi isiphi isikali esibikiwe kusuka kunzwa yakho yokushisa.
| Ipharamitha # | Isifunda | Usayizi | Inani | Okuzenzakalelayo |
| 20 | EU / AU | 1 | 0 – 1 | 0 |
| US | 1 | 0 – 1 | 1 |
Inani nencazelo;
0 = UCelcius
1 = Fahrenheit
21. Ukubikwa kweThempelesha.
Shintsha inani lomkhawulo lokushintsha kwezinga lokushisa ukuze wenze umbiko ozenzakalelayo wenzwa yokushisa. Izikali ezinepharamitha engu-64 zishintshela ku-C noma ku-F.Ukusethwa kwenani lama-20 kungaba ushintsho lwama--2.0 noma +2.0 (C noma F kuye ngeParameter 64) ukwenza umbiko ozenzakalelayo noma ukubeka inani elingu-2 kuzoba ushintsho luka-0.2 ( C noma F).
| Ipharamitha # |
Usayizi |
Inani |
Incazelo |
| 21 |
2 |
0 |
Khubaza umbiko we-Threshold weSensor Temperature |
| 1 – 250 |
Imisa umkhawulo wokuheha umbiko ozenzakalelayo usebenzisa isikali se- 0.1 * inani = umkhawulo wokushisa |
23. Umbiko wokushisa othomathikhi ngokususelwa esikhathini.
Le pharamitha ilungiselelwe isikhathi sokuphumula sombiko wenzwa yokushisa. Leli nani likhudlwana, impilo yebhethri yinde.
| Ipharamitha # |
Usayizi |
Inani |
Incazelo |
| 23 |
2 |
1-32767 |
Umbiko ozenzakalelayo usethwe ngemizuzwana. |
IZENZO = 3600
30. Inani Lokushisa Okushisiwe.
Inani lokushisa lamanje lokulinganisa lingasuswa ngo-a + no - inani ngalesi silungiselelo. Isikali singanqunywa ngeParameter Number 14.
Inani le-Offset Value = [Inani] * 0.1 (Celsius / Fahrenheit)
| Ipharamitha # |
Usayizi |
Inani |
Incazelo |
| 30 |
2 | 200-200 | Inani le-Offset. |
IZENZO = 0
Izilawuli ze-Light sensor.
22. Umbiko Ombalwa Wokukhanya
Shintsha inani lomkhawulo lokushintsha kwenzwa yokukhanya ukuze wenze umbiko ozenzakalelayo wenzwa yokushisa.
Isilinganiso: Lux
| Ipharamitha # | Usayizi | Inani | Incazelo |
| 22 | 2 | 0 | Khubaza umbiko we-Threshold weSensor Temperature |
| 1 – 10000 | Imisa umkhawulo wokuheha umbiko wokuzenzakalela wokukhanya. Imisa umkhawulo we-lux. |
IZENZO = 100
24. Umbiko wokukhanya othomathikhi ngokuya kwesikhathi.
Le pharamitha ihlelwe isikhathi sokuphela kombiko wenzwa yokukhanya. Leli nani likhudlwana, impilo yebhethri yinde.
| Ipharamitha # | Usayizi | Inani | Incazelo |
| 24 | 2 | 1-32767 | Umbiko ozenzakalelayo usethwe ngemizuzwana. |
IZENZO = 3600
31. Inani le-Sensor Light Offset.
Inani lamanje lokukhanya kwesilinganiso sokukhanya lingasuswa ngokusetha ukungeza nokukhipha inani ngalesi silungiselelo.
| Ipharamitha # | Usayizi | Inani | Incazelo |
| 31 | 2 | 0 | Khubaza umbiko we-Threshold weSensor Light |
| 1000-1000 |
IZENZO = 0
100. Ukulinganisa Inzwa Yokukhanya.
Lokhu kulungiselelwa kuchaza isikali esilinganisiwe sokuqina kokukhanya kwesikhala. Ngenxa yendlela nesimo lapho inzwa efakwe khona nesembozo senzwa kuzoletha iphutha lokulinganisa, ungathola ukukhanya okukhulu kwangempela ngalesi silungiselelo sepharamitha. Kufanele ugijimise izinyathelo zokulinganiswa kwenzwa ye-lux
Ukuze usebenzise lokhu kulinganisa ngokunembile, kufanele usebenzise imitha ye-lux enembile enjengale: https://www.amazon.com/HDE-LX-1010B-Digital-Luxmeter-Display/dp/B00992B29I (Lesi yi-ex njeample, imitha ye-lux enembe kakhudlwana onayo, isilungiselelo sokulinganisa esingcono ozokwazi ukusisebenzisa).
1) Setha leli nani lepharamitha lizenzakalelayo (Kucabanga ukuthi inzwa ingezwe ku-Z-Wave Network).
2) Beka i-luxmeter yedijithali eduze kwenzwa bese ugcina ukuqondisa okufanayo, ukuqapha inani lokukhanya kokukhanya (Vm) bese uyiqopha. Ngasikhathi sinye kufanele urekhode inani (Vs) ye-luxmeter yakho yedijithali.
3) Bala k = Vm / Vs. ukuthola i-coefficient k.
4) Inani le-k libe seliphindaphindwa ngo-1024 bese lizungezelwa kunombolo ephelele eseduzane.
5) Setha inani olithole ku-4 kule pharamitha bese ucindezela ukusetha ku-TriSensor yakho.
Okwesiboneloample,
Vm = 300, Vs = 2600, lapho-ke
k = (2600/300) * 1024
k = 8.6667 * 1024 = 8874.7 ≈ 8875 (Qeda phezulu)
Ipharamitha kufanele isethwe ku-8875.
| Ipharamitha # | Usayizi | Inani | Incazelo |
| 100 | 2 | 1-32767 | Isikali silinganisa ukukhanya okukhona |
IZENZO = 1024
