Zonex BACnet IP Gateway for the GEN X System
Overview
The GATEWAY is a BTL certified, high performance, configurable, cost effective way to easily integrate the GEN X zoning system into building management systems via BACnet IP. System integrators world-wide have benefited from the value of and ease of interoperability that gateways provide. Now, Zonex’s GATEWAY for the GEN X adds that same value by running a robust FieldServer protocol conversion software on a highly cost effective platform. The GATEWAY is backed by the experience, engineering expertise and proven technical support that integrators have come to expect. The GATEWAY includes browser-based tools to make it easy to set-up and perform diagnostics including determination of status, network settings, node information, map descriptors and more.
QuickServer Features and Benefits
- Interface 250 device points.
- DIN rail mount standard.
- BACnet IP COV support for fast data communication while reducing the traffic over a BACnet IP* network.
- On-board diagnostics allow easy troubleshooting for Ethernet communications.
Seamlessly integrates the GEN X zoning system with a BMS.
No option for BACnet MS/TP
FieldServer Offers
- BTL certified.
- Over 20 years of experience in design and manufacture of building automation gateways with thousands of installations.
- Best effort e-mail support from Chipkin.
- 4 hours of phone support and unlimited email support from Chipkin can be purchased through Zonex Systems at an additional cost.
Accessories
- Accessory Kit includes AC power supply, Ethernet cable, mini-screwdriver and a USB flash drive with all data sheets, manuals, notes, the discovery tool and more.
Hardware Specifications
Communication
- Ethernet: 10/100BaseT, MDIX, DHCP
- No option for BACnet MS/TP
Environment
Operating Temperature: -20 to 70°C (-4 to 158°F) Relative Humidity: 10-95% RH non-condensing
Other
- Web configuration
- On-board diagnostics
- DIN rail mount included
Construction
- HxWxD: 4 x 1.1 x 2.7 in (10.16 x 2.8 x 6.8cm)
- Weight: 0.4 lbs (0.2 Kg)
Power Requirements *
- Input: 24VAC 0.125A; 9-30VDC 0.25A @12 VDC Max Power: 3W
Supports both Full-Wave and Half-Wave AC
Approvals
- CE and FCC Part 15 B & C
- BTL marked and KC certification
- UL 60950-1 and CAN/CSA C22.2
- DNP 3.0 and Modbus conformance tested
- RoHS3, UKCA, and WEEE compliant
- ODVA conformant
Documents / Resources
 |
Zonex BACnet IP Gateway for the GEN X System [pdf] Owner's Manual BACnet IP Gateway for the GEN X System, IP Gateway for the GEN X System, Gateway for the GEN X System, GEN X System, System |
