ZIPWAKE T10 Automatic Mini Controller
MINI CONTROLLER INSTALLATION
PREPARE THE DASH
Locate a free area on the dash suitable for mounting the mini controller. Use the template as a guide to see if it will fit next to other instruments.
NOTE! 0.5 m (1.6 ft) safe distance to magnetic compass.
Flush mount option
Refer to zipwake.com for a drawing and 3D model.
Route the cable(s): Standard cable (with optional extension cable) from I-BUS OUT on an integrator module, control panel or mini controller. Optional cables for extra device and/or key sense (ignition switch).
NOTE! The mini controller must not be connected directly to I-BUS OUT on the distribution unit.
Connect the cables on the back of the mini-controller.
MINI CONTROLLER FUNCTIONS
MANUAL MODE
AUTOMATIC MODE
LED INDICATION
MINI CONTROLLER
NOTE!
zipwake.com Refer to the Installation Guides and Operator’s Manuals for detailed information about setting up and operating the system.
Visit zipwake.com for additional information such as:
- Operator’s Manuals and Installation Guides in different languages
- Product specifications, including a list of accessories and spare parts
- Application examples and Interceptor mounting options
- Drawings and 3D models of system components
- Software upgrades for your Dynamic Trim Control System
- NMEA 2000 documentation
Documents / Resources
 |
ZIPWAKE T10 Automatic Mini Controller [pdf] User Guide T10 Automatic Mini Controller, T10, Automatic Mini Controller, Mini Controller, Controller |