Zigbee DHA-263 Okasha Gateway
Specifications
- Product: Gateway ET Home Link DHA-263
- Status: 2024.10 Version 1.0 / EN
Overview
The ET Home Link DHA-263 is a gateway device designed to provide assistance for starting up and using home automation systems. It is important to read the operating instructions carefully before using the device and keep the manual in a safe place for reference.
Intended Use
The ET Home Link DHA-263 is intended for controlling and monitoring home automation systems. It should be used in accordance with the guidelines provided in the operating manual.
Controls and Display Elements
The device features various operating elements and displayelements to interact with and monitor the home automation systems connected to it.
Putting into Operation
- Ensure the gateway device is correctly connected to the power source and your home automation systems.
- Power on the device using the designated power button.
- Follow the on-screen instructions or refer to the manual for initial setup procedures.
Troubleshooting
If you encounter any issues with the ET Home Link DHA-263, refer to the troubleshooting section of the manual for guidance on resolving common problems.
Cleaning and Storage
- Before cleaning, ensure the device is powered off anddisconnected from any power source.
- Use a soft, dry cloth to gently clean the exterior of the device.
- Store the device in a cool, dry place away from direct sunlight when not in use.
FAQS
Q: What should I do if the device is not connecting to my home automation systems?
A: Check the connections between the gateway device and your home automation systems. Ensure all cables are securely connected and try resetting the device.
Q: How often should I clean the ET Home Link DHA-263?
A: It is recommended to clean the device periodically or when dust or dirt accumulates on the exterior. Follow the cleaning instructions provided in the manual.
“`
LEGAL NOTICE
Operating Instructions Gateway ET Home Link DHA-263
Manufacturer EUROtronic Technology GmbH Südweg 1 36396 Steinau-Ulmbach Germany www.eurotronic.org
Publisher Ingenieurbüro FORMAT GmbH Ebertstraße 80 26382 Wilhelmshaven Germany www.format-docu.de
Safety Information
1.2 WARNINGS
When operating your ET Home Link DHA-263 and its components, risks may arise that can be avoided by observing the following warnings.
WARNING!
Danger of electric shock! Improper handling of the product can lead to injuries. Î Never open or repair your device. Î Never touch the bare contacts of your device with metallic objects. Î Place the device near an easily accessible power socket. Î Never plug or unplug the power supply unit of your device with wet hands.
WARNING!
Risk of fatal injury and accidents to infants and children! There is a risk of suffocation from the device and packaging material. Î Never leave children unsupervised with the device or the packaging material. Children underesti-
mate the risks involved. Always keep children away from the device and packaging material.
CAUTION!:
Risk of injury due to malfunction! Malfunctions can lead to injuries. Î Never carry out repairs to the device yourself. Î Do not open the device. Î Do not short-circuit the connection terminals of the device. Î Do not carry out any modifications or conversions on your device. Î Do not use the device if it is damaged. Î In the event of an error, contact Customer Service.
IMPORTANT!
Material damage and malfunction possible! The device can be used by children from the age of 8 and persons with restricted physical, sensory or mental capabilities or a lack of experience and knowledge when they are supervised or if they have been instructed on safe use of the device and understand the potential dangers involved. Î Children must not be allowed to play with the device. Î Cleaning and user maintenance must not be carried out by children without supervision.
6
ET Home Link DHA-263
Safety Information
IMPORTANT! Material damage and malfunction possible! Environmental influences can affect the functions of the device. Î Keep the device away from direct sunlight. Î Only use the device in a dry, dust-free environment. Î Use only original accessories. Î Do not operate the device if it is damaged. IMPORTANT! Material damage and malfunction possible! Damaged components and/or malfunctions prevent the device from working properly. Î If material damage and/or malfunctions occur, contact the Customer Service of Eurotronic
Technology GmbH.
7
ET Home Link DHA-263
Scope of Delivery
2 SCOPE OF DELIVERY
Check the scope of delivery for completeness as well as visual and technical defects before putting the ET Home Link DHA-263 into operation. · 1× ET Home Link DHA-263 gateway · 1× power cable · 1× Quick Guide
IMPORTANT! Material damage and malfunction possible! Damaged components and/or malfunctions prevent the device from working properly. Î If material damage and/or malfunctions occur, contact the Customer Service of Eurotronic
Technology GmbH.
8
3 OVERVIEW
ET Home Link DHA-263
Overview
Thank you for choosing a product from EUROtronic Technology GmbH. The ET Home Link DHA-263 is a gateway equipped with the ZigBee wireless standard for connection and communication with smart energy-saving controllers. After connection to your ET Home Link, they regulate the room temperature automatically according to your instructions. Use the ET HomeLink app for configuration purposes.
Development and production are 100% “Made in Germany”, which guarantees premium quality and technology. These operating instructions will help you to get your ET Home Link DHA-263 up and running quickly and easily.
INFORMATION
The drawings in these instructions are for the purpose of illustration and are not necessarily to scale. Product designations and pictograms on screenshots may differ from the actual product. EUROtronic Technology GmbH reserves the right to change the design or dimensions without prior notice.
3.1 INTENDED USE
Your Gateway ET Home Link DHA-263 is used to connect and control Eurotronic energy-saving controllers with hydraulic balancing. It is forbidden to carry out any unauthorised modifications, conversions and repairs.
Any use other than that described here is considered unintended use and will result in the loss of rights related to the terms of guarantee and exemption of liability.
INFORMATION
The gateway can be used to control Eurotronic energy-saving controllers with hydraulic balancing. Other devices are not supported and are rejected by the gateway.
9
ET Home Link DHA-263
Controls and Display Elements
4 CONTROLS AND DISPLAY ELEMENTS
The following section describes the controls and display elements of the gateway.
Wi-Fi
1
3
2
Zigbee
4
1 Wi-Fi LED 2 ZigBee LED 3 Reset button (on the rear side)
5
4 NFC contact surface 5 Micro USB port
4.1 OPERATING ELEMENTS
Button
Action
Function
Press button and keep pressed
for 5 sec.
The gateway is reset.
10
4.2 DISPLAY ELEMENTS
ET Home Link DHA-263
Controls and Display Elements
WI-FI LED Status
Colour
Configuration mode Flashes green/yellow
Establishing a connection
Flashes green/yellow 2×
Function Configuration mode is active. The gateway can be added to the app.
The gateway is connecting to the server.
Operating status Data transfer Update Reset Error status C1 Error status C2
Lights up green/yellow
The gateway is in normal operating status.
Flashes green/yellow once, briefly Lights up orange
Flashes red 2 ×
Flashes red 1× every 2 seconds
The gateway is sending or receiving data.
The gateways or an energy-saving controller connected is being updated.
The gateway is being reset to its default factory settings. The Wi-Fi password has been entered incorrectly in the app. The gateway cannot connect to the Wi-Fi network.
Flashes red 2× every 2 seconds The Wi-Fi connection is interrupted.
Error status C3 ZIGBEE LED
Flashes red 3× every 2 seconds The Wi-Fi connection exists but there is no connection to the server.
Search
Establishing a connection
Flashes yellow/green, briefly, every 2 seconds
Flashes green/yellow quickly
The gateway searches for ZigBee devices which are available.
The ZigBee network is being established.
Normal operation Lights up yellow/green
The gateway is in normal operating status.
Data transfer Update Reset Error status
Flashes yellow/green 1×, briefly The gateway is sending or receiving data.
Lights up orange Flashes red 2 ×
The gateways or an energy-saving controller connected is being updated.
The gateway is being reset to its default factory settings.
Lights up red
Error in the ZigBee network.
11
ET Home Link DHA-263
Putting into Operation
5 PUTTING INTO OPERATION
The connection process of ZigBee devices is referred to as “inclusion”. The disconnection process is referred to as “exclusion” Both processes must be initiated by the gateway. Behaviour in the ZigBee Network The gateway serves as a base for the ZigBee network in order to communicate with other ZigBee certified devices and/or applications from other manufacturers. All the network nodes which are not battery powered, regardless of their manufacturer, function as repeaters and improve the reliability of the wireless ZigBee network. Network Security Your gateway can communicate encrypted with other ZigBee devices when they also support encrypted communication. If this is not the case, communication is completed unencrypted. The following sections describe the procedure using the ET HomeLink app for the Android operating system. The procedure may differ for the iOS operating system.
INFORMATION The following screenshots show the app at the time of publication of this operating manual. Newer versions of the app may differ in appearance and content. Please note that parts illustrated in the screenshots could deviate in appearance from your products.
12
ET Home Link DHA-263
Putting into Operation
5.1 INSTALLING THE APP ET HOMELINK APP
1. Download the ET HomeLink app from Google Play (Android) or the App Store (iOS). 2. Install the app on your smartphone. System requirements: Android from version 6.0 iOS from version 13
INFORMATION During the initial set-up of the app, requests are made as to whether the app is granted authorisation to access functions of your smartphone. Allow access to use the full range of functions of your gateway. 3. Open the app on your smartphone and follow the instructions. 4. Create a new user account to use the app. Please note that the existing user accounts of the ET
HomeLink app are not compatible. Î The main view, My Home, appears on the screen.
13
ET Home Link DHA-263
Putting into Operation
5.2 CONNECT THE GATEWAY WITH THE APP
The following steps describe how to add your gateway to the app.
5.2.1 ADDING THE GATEWAY
1
1. Tap on the button to add a new device.
2 2. Tap on the Add ET Home Link button. 3. Then follow the steps displayed in the setup wizard to set-up your gateway for use for the first time.
14
5.2.2 SELECTING A NETWORK
ET Home Link DHA-263
Putting into Operation
1 2
3
1. The WiFi network to which your smartphone is connected is automatically displayed. If necessary, you can integrate the gateway in another Wi-Fi network. To do this, close the app and connect your smartphone to the required Wi-Fi network.
INFORMATION For your WiFi to be displayed in the My WiFi Network field, the following requirements must be met: · Your WiFi must transmit in the 2.4 GHz frequency range. If your router only supports the 5 GHz fre-
quency range, operation of the gateway is not possible. For more information, refer to the operating instructions for your router. · The location detection (GPS) of your smartphone must be activated. · The ET HomeLink app requires authorisation to access your location (GPS). Adjust this setting in your smartphone, if necessary. For more information, refer to the operating instructions for your smartphone. 2. Enter your Wi-Fi password in the input field. Make sure you spell your password correctly. The app does not check the WiFi password. If the password is entered incorrectly, the setup process still continues but a connection to your gateway cannot be established. 3. Tap the Next button.
15
ET Home Link DHA-263
Putting into Operation
5.2.3 CONNECTING THE GATEWAY TO THE POWER SUPPLY
1
2 1. Connect the gateway to a suitable power socket using the micro-USB cable and an appropriate USB
power adapter, as illustrated. INFORMATION No USB power adapter is contained in the package supplied. Use an appropriate USB power adapter with the following technical data: – Output: 5 V DC, 1 A 2. Tap the Next button.
16
ET Home Link DHA-263
Putting into Operation
5.2.4 CONFIGURATION OF THE GATEWAY
The gateway automatically switches to Configuration mode. When Configuration mode is activated, the ZigBee LED lights up green/yellow continuously and the Wi-Fi LED flashes green/yellow.
INFORMATION If the LEDs indicate a different status, reset the gateway to its default factory settings (see Section 5.6 Resetting the Default Factory Settings on Page 40) and repeat the process.
1 1. Tap the Next button.
17
ET Home Link DHA-263
Putting into Operation 2
2. Tap on the Configuration mode required: NFC, continue with Section Configuring Using NFC on Page 19 WiFi, continue with Section ConfigurING using Wi-Fi on Page 21
18
ET Home Link DHA-263
Putting into Operation
CONFIGURING USING NFC After selecting the NFC option, follow the subsequent instructions. The NFC function (“Near Field Communication”) enables compatible devices nearby to exchange data with each other by implementing wireless communication.
INFORMATION A condition for using the NFC configuration mode is that your smartphone supports the NFC function and that the function has been activated on the smartphone. For more information, refer to the operating instructions for your smartphone.
1
2 1. Lay the NFC contact surface of your smartphones (rear side) as illustrated on the NFC contact surface
of the gateway. 2. Tap on the Write button.
Î The configuration data is transferred from the smartphone to your gateway.
19
ET Home Link DHA-263
Putting into Operation
3. Wait until the configuration process has been completed.
4 4. When the configuration process has been completed, tap on the Next button.
20
ET Home Link DHA-263
Putting into Operation
CONFIGURING USING WI-FI After selecting the Wi-Fi option, follow the subsequent instructions. The process differs according to the operating system (Android, iOS) used on your smartphone. The following instructions describe the procedure for Android. If you use the iOS operating system, the Wi-Fi configuration (instruction steps 1 – 4) are automatic.
1 1. Tap on the Open Wi-Fi settings button.
Î The Wi-Fi settings on your smartphone are displayed. 2. Tap on the ET HomeLink WiFi. 3. If necessary, enter the standard password ET Home Link Wi-Fi link: 11223344. 4. Switch back to the ET HomeLink app.
21
ET Home Link DHA-263
Putting into Operation
5 5. Tap the Next button.
7 6. Wait until the configuration process has been completed. 7. When the configuration process has been completed, tap on the Next button.
22
5.2.5 CONCLUDING CONFIGURATION OF THE GATEWAY
ET Home Link DHA-263
Putting into Operation
1
2
1. Assign an unambiguous name for your gateway. The name appears in the app. 2. Tap the Save button.
Î The gateway has been set-up and configured successfully.
INFORMATION
Information on connecting an energy-saving controller to the gateway is available in the respective operating manual. In case of doubt, contact our customer support service, see Section 8.2 Support and Contact on Page 44.
23
ET Home Link DHA-263
Putting into Operation
5.3 OPERATING THE ET HOME LINK
You can operate your gateway via the ET HomeLink app. 3
2
1 1. Tap on the Gateway menu option. 2. Tap on the tile of the gateway to open a detail view of the device with further information.
3. Tap on the Menu button. Î An additional menu appears.
24
ET Home Link DHA-263
Putting into Operation
4 5 6
4. Tap on the Edit button to edit the details of your gateway. 5. Tap on the Delete button to delete the gateway from the app.
INFORMATION If you delete the gateway from the app, all the energy-saving controllers connected via the app (and other devices connected) are also deleted from the app. 6. Tap on the Device overview button to open an overview of all devices connected via the gateway.
25
ET Home Link DHA-263
Putting into Operation
5.4 OPERATING AN ENERGY-SAVING CONTROLLER
A condition for operating an energy-saving controller via the gateway is that one or more energy-saving controllers are connected via the ET Home Link app. Information on connecting an energy-saving controller to the gateway is available in the respective operating manual.
2
1 1. Tap on the Home menu option. 2. Tap on the Menu button.
Î An additional menu appears. 3 4
3. Tap on the Edit button to edit the name of the room. 4. Tap on the Delete button to delete the room.
26
ET Home Link DHA-263
Putting into Operation
5.4.1 SETTING THE TEMPERATURE IN A ROOM
You can set the temperature for each room individually. After selecting a room, set the desired temperature for the room or radiator.
1
1. Tap on the desired room (e.g. office). Î The current room temperature and the set temperature are displayed.
INFORMATION Thanks to the “hydraulic balancing” function, all the energy-saving controllers in a room open or close the heating valves evenly. This prevents radiators becoming too hot or too cold.
27
ET Home Link DHA-263
Putting into Operation
2. Make additional settings: 1 2 3
4
1 The menu displays all energy-saving control- 4 Heating profile off:
lers that are assigned to the current room. You
The stored heating profile is not active.
can define further settings for the selected
Heating profile on:
energy-saving controllers, see Section
The stored heating profile is active. However,
5.4.2 Device settings on Page 29.
you can still make changes to the temperature.
2 The Current temperature area displays the current temperature in the room.
3 Adjust the temperature individually with the setting wheel in the Target temperature
The temperature set manually is maintained until the next switching point. The energy-saving controller then switches to the set heating programme.
area. The temperature selected is transferred
to the energy-saving controller.
INFORMATION Not all the functions shown are activated by default.
28
ET Home Link DHA-263
Putting into Operation
5.4.2 DEVICE SETTINGS
The menu of a room (see Section 5.4.1 Setting the Temperature in a Room on Page 27.) provides access to all the energy-saving controllers assigned to a room. You have access to additional settings and information regarding the gateway selected:
1 2 3 4 5
7
6
8
1 Mac address of the device 2 Current battery charge status 3 Activate/deactivate Key lock 4 Rotate display 180°
5 Carry out temperature adjustment 6 Version of the current Wi-Fi software 7 Version of current controller software 8 Name of the connected gateway
INFORMATION Not all the functions shown are activated by default.
29
ET Home Link DHA-263
Putting into Operation
5.4.3 HEATING PROFILE
In the Heating profile menu, you set heating blocks with heating times for different days. You can set the temperature individually for each heating time. CREATING A HEATING PLAN
1 1. Tap on the Heating plans menu option.
Î The overview of the heating profiles is displayed. 2
2. Tap the button to create a new heating profile. Î The overview of the available rooms is displayed.
30
ET Home Link DHA-263
Putting into Operation
3
4 3. Tap on one or more rooms for which the heating profile is to apply. 4. Tap the Next button. 5. Enter a designation for the heating profile in the input field. 6. Tap the Next button.
7
8 7. Select a symbol for the heating profile. 8. Tap the Save button.
Î You have successfully created the heating profile.
31
ET Home Link DHA-263
Putting into Operation EDITING OR DELETING A HEATING PLAN 1
1. Option: Tap on the Menu button. Î An additional menu appears. 2 4 3
2. Tap on the Edit button to edit the details of the heating plan. 3. Option: Tap on the Delete button to delete the heating plan.
32
4. Tap the heating profile to set the heating times:
6 5 4
ET Home Link DHA-263
Putting into Operation
1 2
1 Set the target temperature for the selected switching point.
2 Delete the selected heating time.
3 Save the settings.
3 4 Add a new heating time.
5 Set the ending time of the selected heating time.
6 Set the starting time of the selected heating time.
INFORMATION
Note that the settings are only transferred to the corresponding energy-saving controller and are consequently activated by firstly tapping the Save button.
33
ET Home Link DHA-263
Putting into Operation
5.4.4 ABSENCE PLAN
Use the Away menu to define a holiday plan for a period of absence. You can set the temperature individually for each switching point.
2
1 1. Tap on the Away button. 2. Tap on the button to create a new absence plan.
Î The overview of the available rooms is displayed. 3
4 3. Tap on one or more rooms for which the absence plan should apply. 4. Tap the Next button.
34
ET Home Link DHA-263
Putting into Operation
5
6 5. Enter a name for the absence plan in the input field. 6. Tap the Next button.
7
8 7. Select a symbol for the absence plan. 8. Tap the Save button.
35
ET Home Link DHA-263
Putting into Operation
9
9. Option: Tap on the Menu button. Î An additional menu appears. 10 12 11
10.Tap on the Edit button to edit the details of the absence plan. 11.Option: Tap on the Delete button to delete the absence plan.
36
ET Home Link DHA-263
Putting into Operation
12.Tap on the Away disabled/enabled button to set the heating times: 1 2
4
3
1 Overview of which rooms should be assigned to the holiday plan.
2 Activate/Deactivate the holiday plan.
3 Save the settings.
4 Set the Away temperature for the period of absence.
INFORMATION
Note that the settings are only transferred to the corresponding energy-saving controllers and are consequently activated by tapping the Save button.
INFORMATION
The temperature can be adjusted manually at any time. The heating plan is not interrupted by adjusting the temperature.
37
ET Home Link DHA-263
Putting into Operation
5.5 DISCONNECTING THE ZIGBEE CONNECTION
It may be necessary to disconnect the connection between your gateway and an energy-saving controller. Ensure that the following condition is fulfilled: · The batteries have been inserted in the energy-saving controller. 1. Open the ET HomeLink app on your smartphone.
1
2. Tap on the Menu button. Î An additional menu appears.
38
ET Home Link DHA-263
Putting into Operation
3
3. Tap on the Delete button. Î The connection to your gateway has been disconnected. Î PA appears in the display of the energy-saving controller.
INFORMATION If Er appears in the display of the energy-saving controller, repeat the process.
39
ET Home Link DHA-263
Putting into Operation
5.6 RESETTING THE DEFAULT FACTORY SETTINGS
Should problems occur, it may help to reset the gateway to its default factory settings. 1. Press and hold the Reset button on the rear side for 5 seconds.
Î Die Wi-Fi LED and ZigBee LED light up red and the gateway is reset. Î The Wi-Fi LED flashes green, the ZigBee LED lights up green continuously. Î The gateway has been reset to its default factory settings. Î The gateway is in Configuration mode.
40
6 TROUBLESHOOTING
ET Home Link DHA-263
Troubleshooting
Problems can occur with the gateway. In the case of problems, observe the information on the control lamps, see Section 4.2 Display Elements on Page 11.
41
ET Home Link DHA-263
Cleaning and Storage
7 CLEANING AND STORAGE
Disconnect the gateway from the power supply if the gateway will not be used for a longer period. Store the gateway in a dry, dust-free location.
IMPORTANT! Material damage possible! Improper handling of the device can lead to damage. Î Do not immerse the device in water or other liquids. Î Do not use any brushes with metal or nylon bristles or sharp or metallic cleaning tools such as
knives, hard spatulas and such. They can damage the surfaces. 1. Disconnect the power plug from the power socket. 2. Clean the housing surfaces of the device with a soft, dry, lint-free cloth. Do not use cleaning agents or
solvents.
42
8 APPENDIX
ET Home Link DHA-263
Appendix
The following sections contain information on technical data, customer service and other legal information.
8.1 TECHNICAL DATA
The list below contains the technical data :
Designation Article number EAN number Supply voltage Connection protocol Radio frequency
Maximum transmission power
Reception range Controllable devices Dimensions Weight
ET Home Link DHA-263
700263
4260012712650
Micro USB, 5 V
ZigBee 3.0, Wi-Fi
ZigBee: 2.4 GHz Wi-Fi: 2400 MHz ~ 2483.5 MHz
ZigBee: 8 dBm IEEE 802.11b: 19 dBm IEEE 802.11g: 19 dBm (6 Mbps) IEEE 802.11g: 15 dBm (54 Mbps) IEEE 802.11n: 19 dBm (MSC0) IEEE 802.11n: 15 dBm (MSC7)
70 m
60
68 × 68 × 24 mm
40 g
Subject to technical changes at any time. Compatibility information provided without guarantee.
43
ET Home Link DHA-263
Appendix
8.2 SUPPORT AND CONTACT
You can contact us for technical support. We look forward to assisting you with your enquiry:
Phone:
+49-(0)-6667-91847-0
E-mail:
support@eurotronic.org
Customer service:
EUROtronic Technology GmbH Südweg 1 36396 Steinau-Ulmbach Germany
8.3 DISPOSAL
INFORMATION Obtain information on the possibility of returning old devices to your dealer free of charge.
The adjacent symbol indicates that electrical and electronic apparatus no longer required must be disposed of separate from domestic waste in accordance with legal directives. Dispose of the device at a collection point provided by your municipal waste authorities.
Observe the identifications on the packaging when sorting the waste materials; the identifications are comprised of abbreviations (a) and numbers (b) and have the following significance: 17: plastics / a 2022: paper and cardboard / 8098: composite materials.
b
Dispose of the packaging according to type. Dispose of cardboard and carton at waste paper collection points and foil at recyclables collection points. By recycling, material recovery or other forms of recycling, you are making an important contribution to protecting our environment.
d
d
b – a
b – a
c
c
RACCOLTA DIFFERENZIATA
Verifica le disposizioni del tuo Comune. Separa le componenti e conferiscile in
modo corretto.
The logo only applies to Italy.
44
8.4 PERSONAL DATA
ET Home Link DHA-263
Appendix
Delete all personal data from your user account in the ET HomeLink app before disposing of your gateway.
8.5 SIMPLIFIED DECLARATION OF CONFORMITY
EUROtronic Technology GmbH hereby declares that the radio equipment type ET Home Link DHA-263 complies with Directive 2014/53/EU. The entire text of the EU Declaration of Conformity is available at the following Internet address:https://eurotronic.org/service/downloads
8.6 WARRANTY NOTICE
The warranty period is 24 months and begins on the day of purchase. Keep your receipt as proof of purchase. During the warranty period, defective energy-saving controllers can be sent to the service address with sufficient postage. To do this, contact our Customer Service before returning the item. You will then receive a new or repaired device in return free of charge. Receipt of a repaired or replacement of the device does not begin a new warranty period. Please note that we guarantee the functions of the device, not the functionality between the interaction of the device and the valve base.
After the warranty period has expired, you retain the option of sending the device to the address provided for repair, ensuring sufficient postage. Repairs required after the expiration of the warranty period are subject to a charge. Your statutory rights are not limited by this warranty.
8.7 MANUFACTURER
EUROtronic Technology GmbH Südweg 1 36396 Steinau-Ulmbach Germany
+49 (0) 6667 91847- 0 support@eurotronic.org. www.eurotronic.org
45
EUROtronic Technology GmbH Südweg 1 | 36396 Steinau-Ulmbach | Germany
www.eurotronic.org
Documents / Resources
 |
Zigbee DHA-263 Okasha Zigbee Gateway [pdf] Instruction Manual DHA-263 Okasha Zigbee Gateway, DHA-263, Okasha Zigbee Gateway, Zigbee Gateway, Gateway |