Zigbee DC 1CH WiFi Switch Module Instruction Manual

Zigbee DC 1CH WiFi Switch Module

Specifications

• Model: Switch Module XYZ-1000
• Dimensions: 5.5 x 3.5 x 1.2 inches
• Weight: 0.3 lbs
• Compatibility: Compatible with devices supporting XYZ protocol
• Power: Requires 12V DC power supply

Product Overview

TECHNICAL SPECIFICATIONS

Global international operation & Wherever You are.All-in-one Mobile App

INSTALLATION

warnings:

1. Installation must be carried out by a qualified electrician in accordance with local regulations
2. Keep the device out of reach of children.
3. Keep the device away from water, damp or hot environments.
4. Install the device away from strong signal sources such as microwave oven that may cause signal interruption, resulting to abnormal operation of the device.
5. Obstruction by a concrete wall or metallic materials may reduce the effective operation range of the device and should be avoided
6. Do NOT attempt to disassemble, repair or modify the device.

MANUAL OVERRIDE

The switch module terminal reserves the access manual override function for the end—user to switch on/off. Switch on/off for permanent on/off function.

Notes:

1) Both the adjustment on the App and the switch can overwrite each other; the last adjustment remains in memory.
2) The App control is synchronized with the manual switch.

Wiring Instructions and Diagrams

1. Turn off the power supply before carrying out any electrical installation work.
2. Connect wires according to the wiring diagram.
3. Insert the module into the junction box.
4. Turn on the power supply and follow the switch module configuration instructions.

Notes: Take your smartphone close to the switch module when you’re configuring, and make sure you have a minimum. 50% Wi-Fi signal.

Low-voltage lamp wiring diagram

High voltage lamp wiring diagram

Double Switch

Product Usage Instructions

1. Scan the QR code to download Tuya Smart App, oryou can also search the keyword “Tuya Smart” at App Store or Google Play to download App.
2. Log in or register your account with your mobile number or e—mail address. Type in the verification code sent to your mobile or mail, then set your login password. Click “Create Family” to enter into the APP.
3. After the wiring of switch module is done, press the reset key for about 10 seconds or turn on/off the traditional switch for 5 times until the indicator light inside the module is flashing quickly for pairing.
4. Support multi—protocol matching: WIFI/Bluetooth.
   1. Turn on Bluetooth, click “+” , follow the on—screen instructions for pairing.
5. The connecting will take about 10—120 seconds to complete depending on your network condition.
6. Finally, you can control the device via your mobile phone.
7. Connect to Amazon Alexa or Google Assistant for voice control, or share the devices with your family or friends.
8. Enjoy your smart life of home automation for lighting control by using our All-in-one mobile app wherever you are in the world or simply by voice control when you are sitting at home comfortably.

FAQ